Abaqus
Feasibility Study of Three-Dimensional Crack Growth Modeling in Porous Media with Circular Pores Using Two-Dimensional Sections [Volume 41, Issue 2, 2022, Pages 29-60]
Accordion thin-walled tube
Study of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads [Volume 25, Issue 1, 2006, Pages 101-119]
Accuracy
Seismic Wave-Field Propagation Modelling using the Euler Method [Volume 38, Issue 2, 2019, Pages 115-123]
Acidizing
Using Computational Fluid Dynamics for Determining the Optimum Pre-flush Fluid Injection Condition During Matrix Acidizing [Volume 41, Issue 2, 2022, Pages 117-136]
Acoustic wave
Numerical Simulation of Particle Separation in the Fluid Flow in a Microchannel Including Spiral and Acoustic Regions [Volume 39, Issue 2, 2020, Pages 1-21]
Acoustic wave propagation
Investigation of Piezoelectric Coupling and Anisotropy Effect on Acoustic Wave Propagation at LithiumNiobate Crystalloacoustic [Volume 36, Issue 1, 2017, Pages 149-159]
Acrylic yarn
Using the Geometric Model to Explain the Longitudinal and CrossâSectional Reflection Behaviors of Acrylic yarns [Volume 21, Issue 2, 2002, Pages 167-180]
Active Power Filter
Genetic Algorithm- Based Active Power Filter Allocation and Size Determination [Volume 21, Issue 1, 2002, Pages 29-41]
Active suspension system
Design of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System [Volume 39, Issue 2, 2020, Pages 23-44]
Active Suspension Systems
Design and Construction of an Electromagetic Supension System for Vehicles [Volume 20, Issue 2, 2001, Pages 1-16]
Adaptive
Combination of Adaptive-Grid Embedding and Redistribution Methods on Semi Structured Grids for two-dimensional invisid flows [Volume 27, Issue 2, 2008, Pages 123-137]
Adaptive active filter
Desing And Implementation of Adaptive Active Filters for Exact Estimation And Elimination of AC Network Distortions [Volume 21, Issue 2, 2002, Pages 29-44]
Adaptive analysis
Automatic Adaptive Finite Element Enrichement using Interpolation Cover Functions [Volume 37, Issue 2, 2018, Pages 79-96]
Adaptive control
Application of a Direct Model Reference Adaptive Controller (DMRAC) in a Nonlinear Cardiovascular Model [Volume 22, Issue 2, 2003, Pages 35-49]
Adaptive neuro-Fuzzy Inference System (ANFIS)
Electricity Load Forecasting by Combining Adaptive Neuro-fuzzy Inference System and Seasonal Auto-Regressive Integrated Moving Average [Volume 38, Issue 1, 2019, Pages 119-129]
Adaptive speed ontrol
Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory [Volume 22, Issue 2, 2003, Pages 21-34]
Adaptive system
Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory [Volume 22, Issue 2, 2003, Pages 21-34]
Adherence
Metalization of Polymers: Copper on Cyclotene [Volume 22, Issue 1, 2003, Pages 167-174]
Adhesion
Mechanical Properties of Polypropylene Coating Containing Maleic Anhydride on Plain Carbon Steel [Volume 25, Issue 2, 2006, Pages 191-203]
Adjacent Buildings
Shake Table Study of Soil-Structure Interaction Effects on Seismic Response of Adjacent Buildings [Volume 22, Issue 2, 2003, Pages 51-71]
Advanced empirical mode decomposition
Identification of Nonlinear Modal Interactions in a Beam-Mass-Spring-Damper System based on Mono-Frequency Vibration Response [Volume 38, Issue 1, 2019, Pages 19-36]
Advective upwind
A Modified Flux Vector Splitting Scheme for Flow Analysis in Shock Wave Laminar Boundary Layer Interactions [Volume 20, Issue 2, 2001, Pages 167-180]
Aerodynamic
Stress Analysis of Flight Vehicles under Flight Conditions [Volume 25, Issue 1, 2006, Pages 217-226]
Aerodynamic coefficient
Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model [Volume 26, Issue 1, 2007, Pages 233-246]
Aerodynamics
Minimum-Time Roll Around the Velocity-Vector Maneuver of Aircraft [Volume 20, Issue 1, 2001, Pages 173-187]
Aeroelasticity
Stress Analysis of Flight Vehicles under Flight Conditions [Volume 25, Issue 1, 2006, Pages 217-226]
Aeroelasticity
Determination of Dynamic Instability Speed of an Unsweep Wing in Subsonic Flow Including Compressibility Effects [Volume 26, Issue 1, 2007, Pages 197-207]
Aged
Microstructural Effect on the Weldability of 25Cr-35Ni Cast Steel [Volume 24, Issue 1, 2005, Pages 327-336]
Airpornt
An Optimum Model for the Design of Airport Aprons [Volume 20, Issue 2, 2001, Pages 93-106]
Al2O3–H2O Nanofluid
Heat Transfer Enhancement of Al2O3âH2O Nanofluid Free Convection in Two-Phase Flow with Internal Heat Generation Using Two Dimensional Lattice Boltzmann Method [Volume 40, Issue 2, 2021, Pages 1-18]
Algorithms
Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]
Alkali treatment
Hot Mercerizing of Cotton/Polyester Blend Fabric Effect of Alkali Treatment Temperature on Ttensile Properties , Weight Loss and Shrinkage of Fabric [Volume 24, Issue 1, 2005, Pages 355-365]
Allocation
Genetic Algorithm- Based Active Power Filter Allocation and Size Determination [Volume 21, Issue 1, 2002, Pages 29-41]
Alloy plating
Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current [Volume 23, Issue 2, 2004, Pages 197-205]
All speed flow regime
Developing a Shock-Capturing Formulation with Higher Performance to Capture Normal Standing Shock in All-Speed Regime [Volume 25, Issue 2, 2006, Pages 167-181]
Alluvial Bed
Development of Semi-Tow-Dimensional SDAR Model for Bed Variation Simulation in Alluvial Rivers [Volume 23, Issue 1, 2004, Pages 123-145]
Alluvium foundation
Determination of the Nonlinear Equation Coefficients for Flow through Coarse Alluvium Foundations [Volume 21, Issue 1, 2002, Pages 101-112]
Al matrix composites
An Investigation of the Use of Ni3Al Intermetallic Compound for Fabrication of Al Matrix Composites [Volume 25, Issue 2, 2006, Pages 183-190]
Al-Ni3Al
An Investigation of the Use of Ni3Al Intermetallic Compound for Fabrication of Al Matrix Composites [Volume 25, Issue 2, 2006, Pages 183-190]
Alternate path method
Investigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse [Volume 26, Issue 1, 2007, Pages 149-164]
Aluminium
The Microsegregation Pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Irons [Volume 22, Issue 2, 2003, Pages 177-188]
Aluminum matrix Eomposites
Investigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion [Volume 25, Issue 1, 2006, Pages 179-188]
Ambient Vibration Test
Evaluation of Dynamic Characteristics of Marun Embankment Dam Using Ambient Vibration Test and FEM [Volume 22, Issue 1, 2003, Pages 109-127]
Amplification
Transient Site Response Analysis of Nonhomogeneous Two-dimensional Topographic Features Using BEM [Volume 24, Issue 2, 2005, Pages 51-68]
Amplification
Seismic Behavior of 2D Semi-Sine Shaped Hills against Vertically Propagating Incident Waves [Volume 26, Issue 1, 2007, Pages 109-130]
Amplitude
Desing And Implementation of Adaptive Active Filters for Exact Estimation And Elimination of AC Network Distortions [Volume 21, Issue 2, 2002, Pages 29-44]
Analytical hierarchy process
Application of Fuzzy Decision-Making to Facility Layout Planning [Volume 27, Issue 2, 2008, Pages 31-47]
Analytical Solution
Optimized Design of Finite Isotropic Plates with Hexagonal Cutout by Metaheuristic Algorithms [Volume 37, Issue 1, 2018, Pages 107-132]
Anatase
Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]
Anatase
Production of Titanium Carbide via Mechanochemical Process [Volume 27, Issue 2, 2008, Pages 155-164]
Andic oxide
Evaluation of Electrical Breakdown of Anodic Films on Titanium in Phosphate-base Solutions [Volume 22, Issue 2, 2003, Pages 201-213]
Anodizing
Evaluation of Electrical Breakdown of Anodic Films on Titanium in Phosphate-base Solutions [Volume 22, Issue 2, 2003, Pages 201-213]
ANSYS
Analytical Assessment of the Behaviour of the Masonry Wall Strengthed by Steel Mesh and Shotcrete [Volume 25, Issue 2, 2006, Pages 213-221]
Ant Colony
Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]
Ant colony optimizaion algorithm
Ant Colony Algorithm for the Single Loop Routing Problem [Volume 23, Issue 1, 2004, Pages 71-81]
Ant Colony Optimization Algorithm (ACOA)
Optimal Design of Sewer Network Size using Ant Colony Optimization Algorithm: Comparing Performance of Four Different Algorithms [Volume 36, Issue 1, 2017, Pages 115-136]
Applied stress
Prediction of Time to Failure in SCC of 304 Stainless Steel in Aqueous Chloride Solution Using Neural Network [Volume 27, Issue 1, 2008, Pages 135-141]
Apron
An Optimum Model for the Design of Airport Aprons [Volume 20, Issue 2, 2001, Pages 93-106]
Aquifer
Determination of the Nonlinear Equation Coefficients for Flow through Coarse Alluvium Foundations [Volume 21, Issue 1, 2002, Pages 101-112]
Aquifer
Evaluation of Optimum Landfill Design by Contaminant Transport Analysis [Volume 24, Issue 1, 2005, Pages 135-153]
Arbitrary-Lagrangian-Eulerian (ALE)
Simulation of Underwater Explosion with Cavitation using ALE Method [Volume 34, Issue 2, 2016, Pages 73-85]
Artifical Neural Network
Modelling of Stress-Strain Behaviour of Clayey Soils Using Artificial Neural Network [Volume 20, Issue 2, 2001, Pages 107-124]
Artificial Intelligence
A New Method for Solving Constraint Satisfaction Problems [Volume 23, Issue 1, 2004, Pages 1-13]
Artificial Neural Network
Using Artificial Neural Network Algorithm to Predict Tensile Properties of Cotton-Covered Nylon Core Yarns [Volume 24, Issue 2, 2005, Pages 241-251]
Artificial Neural Network
Prediction of Time to Failure in SCC of 304 Stainless Steel in Aqueous Chloride Solution Using Neural Network [Volume 27, Issue 1, 2008, Pages 135-141]
Artificial Neural Network
Thermal Simulation of Friction Stir Welding in 304 Stainless Steel to 5083 Aluminum Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 101-117]
As cast
Microstructural Effect on the Weldability of 25Cr-35Ni Cast Steel [Volume 24, Issue 1, 2005, Pages 327-336]
Assumed Mode
Determination of Dynamic Instability Speed of an Unsweep Wing in Subsonic Flow Including Compressibility Effects [Volume 26, Issue 1, 2007, Pages 197-207]
Asymmetrical rolling
Application of Modified Slab Method in Asymmetrical Plate Rolling [Volume 24, Issue 2, 2005, Pages 137-158]
Asymmetrical rolling
Analysis of Rolling Process for Clad Sheet Using the Modified Slab Method [Volume 25, Issue 1, 2006, Pages 121-134]
ATC
Assessment of ATC Using Voltage and Transient Stability, Simultaneously [Volume 23, Issue 2, 2004, Pages 11-24]
Attitude
Tracking Control of Uncertain Non - Iinear MIMO System Using Modified Sliding Surfaces for Attitude Large Maneuver of Satellites on Orbit [Volume 22, Issue 1, 2003, Pages 203-209]
Attitude control
Dynamic Modeling for Earth â Pointing Satellites to Control the Three â axis Attitude without the Attitude Information of One Axis [Volume 21, Issue 2, 2002, Pages 1-14]
Attitude control
Robust Tracking Control of Satellite Attitude Using New EKF for Large Rotational Maneuvers [Volume 25, Issue 1, 2006, Pages 1-15]
Attitude estimation
Robust Tracking Control of Satellite Attitude Using New EKF for Large Rotational Maneuvers [Volume 25, Issue 1, 2006, Pages 1-15]
Austenite
The Microsegregation Pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Irons [Volume 22, Issue 2, 2003, Pages 177-188]
Automatic ball-spring balancer
Investigating the Dynamics of a Ball-Spring Autobalancer in a Rotor with Non-Linear Bearings [Volume 39, Issue 1, 2020, Pages 29-43]
Auto Regressive Integrated Moving Average
Using a Fuzzy Auto Regressive Integrated Moving Average Model for Exchange Rate Forecasting [Volume 26, Issue 2, 2007, Pages 67-75]
Averaging theorem
Desing And Implementation of Adaptive Active Filters for Exact Estimation And Elimination of AC Network Distortions [Volume 21, Issue 2, 2002, Pages 29-44]
Axially moving plate
Vibration and Stability of Axially Moving Plates by Standard and Spectral Finite Element Methods [Volume 26, Issue 1, 2007, Pages 1-12]
Axisymmetric model
Experimental Study of Base Pressure of Two-Dimensional and Axisymmetric Bodies and Evalution of the Theoretical Methods [Volume 23, Issue 1, 2004, Pages 163-178]
B
Back-order demand
A New Inventory Model for Deteriorating Items with Price-dependent Demand, Time-value of money, and Shortages [Volume 27, Issue 2, 2008, Pages 19-29]
Back Propagation Algorithm
Using Artificial Neural Network Algorithm to Predict Tensile Properties of Cotton-Covered Nylon Core Yarns [Volume 24, Issue 2, 2005, Pages 241-251]
Bainite
Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
Balance WAF-TTCP
An Experimental Study of the Aerodynamic Behavior of the Two Wrap Around Fin Missiles [Volume 21, Issue 1, 2002, Pages 141-152]
Base flow
Experimental Study of Base Pressure of Two-Dimensional and Axisymmetric Bodies and Evalution of the Theoretical Methods [Volume 23, Issue 1, 2004, Pages 163-178]
Base pressure
Experimental Study of Base Pressure of Two-Dimensional and Axisymmetric Bodies and Evalution of the Theoretical Methods [Volume 23, Issue 1, 2004, Pages 163-178]
Batch processing
Minimizing Total Weighted Tardiness in a Flexible Flowshop Environment Considering Batch Processing Machines [Volume 39, Issue 1, 2020, Pages 105-133]
Beam failure
Behavior of Castellated I Beams Encased in Concrete [Volume 24, Issue 1, 2005, Pages 121-134]
Beam-mass-spring-damper system
Identification of Nonlinear Modal Interactions in a Beam-Mass-Spring-Damper System based on Mono-Frequency Vibration Response [Volume 38, Issue 1, 2019, Pages 19-36]
Beam-moving mass
Stability Analysis of a Beam under the Effect of Moving Masses using Homotopy Perturbation Method [Volume 34, Issue 1, 2016, Pages 79-95]
Bearing capacity
Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data [Volume 24, Issue 1, 2005, Pages 77-95]
Bearing capacity
Geotechnical Interaction of Piled Raft Foundations: Two Case Studies [Volume 26, Issue 1, 2007, Pages 93-108]
Bearing capacity
The Effect of Mechanical Anisotropy and Heterogeneity of Shear Strength Parameters of Soils on Drained Bearing Capacity of Shallow Foundations [Volume 36, Issue 1, 2017, Pages 137-147]
Bed Variation
Development of Semi-Tow-Dimensional SDAR Model for Bed Variation Simulation in Alluvial Rivers [Volume 23, Issue 1, 2004, Pages 123-145]
Bending of thin plates
New DKFT Elements for the Finite Element Analysis of Thin
Viscoelastic Plates [Volume 38, Issue 1, 2019, Pages 81-100]
Bends
Laminar Flow Analysis in the Channel Bends [Volume 23, Issue 2, 2004, Pages 151-171]
Bezier curves
Automatic Design of Persian Typefaces [Volume 20, Issue 1, 2001, Pages 113-126]
BIBO stubility
Dynamic Modeling for Earth â Pointing Satellites to Control the Three â axis Attitude without the Attitude Information of One Axis [Volume 21, Issue 2, 2002, Pages 1-14]
Bifurcation Diagrams
Analysis and Comparison of Nonlinear Dynamic Behavior of Viscoelastic and Elastic Rectangular Plates under Supersonic Aerodynamic Flow [Volume 40, Issue 1, 2021, Pages 125-151]
Big data
Feature Selection in Structural Health Monitoring Big Data Using a Meta-Heuristic Optimization Algorithm [Volume 39, Issue 1, 2020, Pages 1-27]
Biomineralization
Effects of Substrate Solution pH, Incubation Temperature, and Calcination Temperature on Bacterial Synthesis of Nano-Crystalline Hydroxyapatite [Volume 27, Issue 2, 2008, Pages 213-226]
Bioreactor
Hydrodynamic simulation of stirred gas-liquid bioreactor for the optimization of the rotation speed of Rushton impellers using CFD [Volume 42, Issue 2, 2023, Pages 109-128]
Bioremediation
Mathematical Modeling of Contaminated Soil Bioremediation Bases on Convection Dispersion Phenomena [Volume 21, Issue 1, 2002, Pages 43-56]
Biot’s theory
Vibration Analysis of Thick Sandwich Plates with Saturated
FG-Porous Core Using Quasi-3D Shear Deformation Theory [Volume 42, Issue 1, 2023, Pages 19-41]
Bi-stable composite plate
Control of Nonlinear Vibration in Bi-Stable Composite Plates using Fuzzy Logic [Volume 34, Issue 2, 2016, Pages 123-142]
BKW
Determination of the Parameters in HOM and BKW Equations of State for Detonation Products [Volume 21, Issue 2, 2002, Pages 73-89]
Blast
Non-linear Response and Dynamic Buckling Analysis of a Cylindrical Sandwich Panel with a Flexible Core under Blast Loading [Volume 39, Issue 1, 2020, Pages 67-85]
Block thresholding
Performance Improvement of Radar Target Detection by Wavelet-based Denoising Methods [Volume 24, Issue 1, 2005, Pages 17-29]
Blood pressure
Application of a Direct Model Reference Adaptive Controller (DMRAC) in a Nonlinear Cardiovascular Model [Volume 22, Issue 2, 2003, Pages 35-49]
Body fitted co-ordinate
Laminar Flow Analysis in the Channel Bends [Volume 23, Issue 2, 2004, Pages 151-171]
Bond-based Peridynamics
A New Bond-Based Peridynamic Model with the Ability to Model Elastoplastic Behavior [Volume 42, Issue 1, 2023, Pages 125-139]
Bonding strength
Influence of (SBR) Latex and Silica Fume on Properties and Performance of Cement - based Repair Concretes [Volume 26, Issue 2, 2007, Pages 33-47]
Bounce back
A Simplified Curved Boundary Condition in Stationary/Moving Boundaries for the Lattice Boltzmann Method [Volume 39, Issue 1, 2020, Pages 87-104]
Boundary-based segmentation
Estimation of PC-MRI Pressure Map Using Integral Form of Governing Equations and Spline Segments [Volume 27, Issue 1, 2008, Pages 117-133]
Boundary Element Method (BEM)
Free and Forced Vibrations of a Shaft and Propeller Using the Couple of Finite Volume Method, Boundary Element Method
and Finite Element Method [Volume 34, Issue 2, 2016, Pages 13-36]
Boundary Elements
Evaluation of the Stability of Time Domain Boundary Element Method in Seismic Analysis of Heterogeneous Environments [Volume 41, Issue 2, 2022, Pages 61-82]
Boundary elements method
A Review on Techniques of Domain Integrals Computation in Boundary Elements Method [Volume 42, Issue 1, 2023, Pages 77-88]
Boundary Fitted Cordinates
Three Dimensional Analysis of Flow Past a Solid-Sphere at Low Reynolds Numbers with the Aid of Body Fitted Coordinates [Volume 20, Issue 2, 2001, Pages 191-206]
Box cross-sectioned columns
Analysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method [Volume 24, Issue 1, 2005, Pages 391-399]
Branch & Bound
Net Present Value of Cash Flows in Single Machine and Flow Shop Scheduling Problems [Volume 27, Issue 2, 2008, Pages 49-65]
Bridge dynamics
Effects of Support Conditions on Dynamic Behaviour and Seismic Response of Ghadir Bridge [Volume 24, Issue 1, 2005, Pages 177-196]
Bridge modeling
Effects of Support Conditions on Dynamic Behaviour and Seismic Response of Ghadir Bridge [Volume 24, Issue 1, 2005, Pages 177-196]
Bridge seismic response
Effects of Support Conditions on Dynamic Behaviour and Seismic Response of Ghadir Bridge [Volume 24, Issue 1, 2005, Pages 177-196]
Buckling
Theoretical and Experimental Collapse Analysis of Ring Stiffened Shells Using Finite Element Software Packages and Application of Results to a Submarine Pressure Hull [Volume 25, Issue 1, 2006, Pages 227-236]
Buckling
Buckling of Cracked Panels under Axial Compressive and Tensile Loading [Volume 34, Issue 1, 2016, Pages 155-164]
Buckling
Buckling Analysis of Functionally Graded Carbon Nanotube-reinforced Composite Plates using Incremental Loading and Dynamic Relaxation Methods [Volume 35, Issue 1, 2016, Pages 43-63]
Buckling
Buckling of Thick Laminated Composite Plates Based on Zigzag and Third order Shear Deformation Theories using the Finite Strip Method [Volume 37, Issue 1, 2018, Pages 83-105]
Buckling
Buckling Analysis of Variable Stiffness Composite Laminates by Semi-Analytical Finite Strip Method [Volume 39, Issue 2, 2020, Pages 73-95]
Buckling
Buckling Analysis of Non-Prismatic Columns Subjected to Non-Uniform Loading Using the Meshless Local Petrov-Galerkin Method [Volume 40, Issue 2, 2021, Pages 39-56]
Buckling
Buckling Analysis of FGM Timoshenko Beam with Variable Thickness under Concentrated and Distributed Axial loads Using DQM [Volume 41, Issue 1, 2022, Pages 135-154]
Buongiorno’s two-phase model
Comparison of Homogenous and Buongiorno’ Model with Eulerian-Lagrangian Model for Nanofluids Heat Transfer in a Microchannel [Volume 41, Issue 2, 2022, Pages 101-116]
Bus network
Solving Bus Terminal Location Problem Using Simulated Annealing Method [Volume 20, Issue 2, 2001, Pages 125-140]
C
Calcium treatment
Inclusion Shape Control and its Effects on the Impact Property of the API X42 Steel [Volume 21, Issue 2, 2002, Pages 133-144]
Cam-flloewr
Dynamic and Stability Analysis of Flexible Cam-Follower Systems [Volume 22, Issue 2, 2003, Pages 117-136]
Cant angle
Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model [Volume 26, Issue 1, 2007, Pages 233-246]
Capillary number
A Numerical Study of Drop Motion in Poiseuille Flow [Volume 25, Issue 2, 2006, Pages 113-129]
Capillary number
Using Computational Fluid Dynamics for Determining the Optimum Pre-flush Fluid Injection Condition During Matrix Acidizing [Volume 41, Issue 2, 2022, Pages 117-136]
Capital investment
Forecasting Capital Investment for Fixed-Telephony Network Switching Equipment in Tandem with NGN Migration Using Cobb-Douglas Model [Volume 27, Issue 1, 2008, Pages 1-16]
Capture Zone
Fundamentals of the Capture Zone Calculations to Qualitatively Protect Cities Drinking Water Wells [Volume 23, Issue 2, 2004, Pages 77-91]
Carbon dioxide
Temperature Distribution of a Non gray Gas between Two Parallel Planes Using Exponential Wide Band Model [Volume 24, Issue 1, 2005, Pages 299-314]
Carbothermic reduction
Production of Titanium Carbide via Mechanochemical Process [Volume 27, Issue 2, 2008, Pages 155-164]
Cardiac output
Application of a Direct Model Reference Adaptive Controller (DMRAC) in a Nonlinear Cardiovascular Model [Volume 22, Issue 2, 2003, Pages 35-49]
Cardiovascular system
Application of a Direct Model Reference Adaptive Controller (DMRAC) in a Nonlinear Cardiovascular Model [Volume 22, Issue 2, 2003, Pages 35-49]
Cash flow
A Heuristic Algorithm for Project Scheduling Problem to Maximizing the Net Present Value [Volume 25, Issue 2, 2006, Pages 11-30]
Cash flow
Net Present Value of Cash Flows in Single Machine and Flow Shop Scheduling Problems [Volume 27, Issue 2, 2008, Pages 49-65]
Cast composite
Investigation of Defects in Ferro-Tic Composites and their Prevention [Volume 25, Issue 1, 2006, Pages 167-178]
Castellated beam
Behavior of Castellated I Beams Encased in Concrete [Volume 24, Issue 1, 2005, Pages 121-134]
Cathodic protection
Optimization of Cathodic Protection on Offshore Structures [Volume 26, Issue 1, 2007, Pages 49-63]
Caustic soda solution
Hot Mercerizing of Cotton/Polyester Blend Fabric Effect of Alkali Treatment Temperature on Ttensile Properties , Weight Loss and Shrinkage of Fabric [Volume 24, Issue 1, 2005, Pages 355-365]
CBR
Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers [Volume 23, Issue 2, 2004, Pages 113-131]
CCCT
Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
CCT
Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
Cell Manufacturing (CM) system
Optimizing the Number of Cells in a Cellular Manufacturing System [Volume 35, Issue 2, 2016, Pages 65-84]
Cemented tungstan carbide
Evaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds [Volume 21, Issue 2, 2002, Pages 145-158]
Certain dynamic conditions
Optimizing the Number of Cells in a Cellular Manufacturing System [Volume 35, Issue 2, 2016, Pages 65-84]
Chalcocite
Laboratory Scale Determination of Optimum Flotation Conditions of Chalcocite at the Sarcheshmeh Copper Complex Using the Taguchi Method [Volume 23, Issue 1, 2004, Pages 211-220]
Channel
Numerical Study of the Effect of Nanofluid on Heat Transfer of a Channel in the Presence of Variable Magnetic Field with Obstacles [Volume 40, Issue 2, 2021, Pages 81-94]
Characteristic period
Seismic Behavior of 2D Semi-Sine Shaped Hills against Vertically Propagating Incident Waves [Volume 26, Issue 1, 2007, Pages 109-130]
Character Segmentation
A Modified Character Segmentation Algorithm for Farsi Printed Text Using Upper Contour Labelling [Volume 23, Issue 1, 2004, Pages 33-48]
Chattering
Robust Nonlinear Control of Missile Longitudinal Dynamics in Presence of Unmatched Uncertainty [Volume 35, Issue 1, 2016, Pages 1-9]
Chebeyshev Series
Stability Analysis for Wake Flow Behind a Flat Plate [Volume 24, Issue 1, 2005, Pages 271-282]
Chebyshev
Static Analysis of in-Plane Heterogeneous Laminated Composite Plates Using Equilibrated Basis Functions Based on FSDT [Volume 40, Issue 1, 2021, Pages 59-77]
Chemical modification
Grafting of Maleic Anhydride onto Co)propylene-b-ethylene( by Extrusion Process: Measurement of Adhesion to Steel Surface [Volume 26, Issue 1, 2007, Pages 313-322]
Chimney
Seismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack [Volume 25, Issue 2, 2006, Pages 73-91]
Chloride concentration
Prediction of Time to Failure in SCC of 304 Stainless Steel in Aqueous Chloride Solution Using Neural Network [Volume 27, Issue 1, 2008, Pages 135-141]
CIECAM97s
A Comparison between CIECAM97s and its Revised Colour Appearance Models for Apearance Attributes of Fabrics [Volume 24, Issue 2, 2005, Pages 227-239]
Circular Disk Model
Development of Circular Disk Model for Polymeric Nanocomposites and Micromechanical Analysis of Residual Stresses in Reinforced Fibers with Carbon Nanotubes [Volume 35, Issue 2, 2016, Pages 177-196]
Circular Fabrics
Fault Detection of Plain Circular Knitted Fabrics Using Wavelet Transform [Volume 23, Issue 1, 2004, Pages 221-227]
Circular Nano plates
The Nonlinear Bending Analysis for Circular Nano Plates Based on Modified Coupled Stress and Three- Dimensional Elasticity Theories [Volume 39, Issue 2, 2020, Pages 59-72]
Circulation
A Three- Dimensional Model of the Caspian Sea [Volume 21, Issue 1, 2002, Pages 207-220]
Clad sheet
Analysis of Rolling Process for Clad Sheet Using the Modified Slab Method [Volume 25, Issue 1, 2006, Pages 121-134]
Classification methods
A Hybrid Intelligent Classification Model Based on Multilayer Perceptron Neural Networks and Fuzzy Regression for Credit Scoring Problems [Volume 37, Issue 2, 2018, Pages 97-111]
Clay
Modelling of Stress-Strain Behaviour of Clayey Soils Using Artificial Neural Network [Volume 20, Issue 2, 2001, Pages 107-124]
Closed cycle
A Corotational Elastic Constitiutive Model and its Application to the Analysis of a Large Deformation Closed Cycle [Volume 23, Issue 1, 2004, Pages 147-161]
Closed loop supply chain
Designing a Closed Loop Supply Chain Network Considering the Supplier Disorder Risk and Production Time [Volume 37, Issue 2, 2018, Pages 61-78]
Cluster Analysis
The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
Clustering of DRI
Effects of Coating Golegohar-Chadormalu Pellet on Its Behaviour in Direct Reduction Process [Volume 24, Issue 1, 2005, Pages 425-433]
Coated pellet
Effects of Coating Golegohar-Chadormalu Pellet on Its Behaviour in Direct Reduction Process [Volume 24, Issue 1, 2005, Pages 425-433]
Coating
Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current [Volume 23, Issue 2, 2004, Pages 197-205]
Cobalt base alloy
The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
Cobb-Douglas model
Forecasting Capital Investment for Fixed-Telephony Network Switching Equipment in Tandem with NGN Migration Using Cobb-Douglas Model [Volume 27, Issue 1, 2008, Pages 1-16]
Coefficient of Performance
Effect of Using Evaporative Condenser Instead of Air Condenser in Window-air Conditioners [Volume 22, Issue 2, 2003, Pages 149-159]
Coefficient of Performance
Evaluation of Evaporative Cooling for Heat Transfer in the Condenser of Window-Air Conditioners [Volume 25, Issue 1, 2006, Pages 135-147]
Coherent
Radar Signal Detection in K-distributed Clutter by Pade Approximation [Volume 26, Issue 2, 2007, Pages 53-65]
Cold Roll-Forming
Determination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis [Volume 21, Issue 1, 2002, Pages 153-166]
Cold rolling of strip
Investigations on Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication [Volume 24, Issue 1, 2005, Pages 283-297]
Collapse
Theoretical and Experimental Collapse Analysis of Ring Stiffened Shells Using Finite Element Software Packages and Application of Results to a Submarine Pressure Hull [Volume 25, Issue 1, 2006, Pages 227-236]
Collocated grid
Developing a Shock-Capturing Formulation with Higher Performance to Capture Normal Standing Shock in All-Speed Regime [Volume 25, Issue 2, 2006, Pages 167-181]
Colorimetric calibration
Colorimetric Scanner Calibration for Textiles by Neural-Network [Volume 22, Issue 2, 2003, Pages 215-224]
Colour
A Comparison between CIECAM97s and its Revised Colour Appearance Models for Apearance Attributes of Fabrics [Volume 24, Issue 2, 2005, Pages 227-239]
Colour appearance models
A Comparison between CIECAM97s and its Revised Colour Appearance Models for Apearance Attributes of Fabrics [Volume 24, Issue 2, 2005, Pages 227-239]
Columns
A Theoretical Study of the Behavior of Reinforced Concrete Columns Strengthened by Steel Plates and Transverse Reinforcements [Volume 25, Issue 2, 2006, Pages 65-72]
Combined cycle
Thermo-economic Analysis of Power Cycles [Volume 24, Issue 1, 2005, Pages 413-424]
Combined forecast
Using a Fuzzy Auto Regressive Integrated Moving Average Model for Exchange Rate Forecasting [Volume 26, Issue 2, 2007, Pages 67-75]
Command shaping
Near-Minimum Time Optimal Control of Flexible Spacecraft during Slewing Maneuver [Volume 24, Issue 2, 2005, Pages 123-135]
Commodity Distribution Systems
Application of Tabu Search to a Special Class of Multicommodity Distribution Systems [Volume 20, Issue 2, 2001, Pages 43-54]
Compaction
Investigation of Shear Strength Anisotropy of c- &phi Soils [Volume 24, Issue 2, 2005, Pages 87-103]
Complex Fourier radial basis functions
New DKFT Elements for the Finite Element Analysis of Thin
Viscoelastic Plates [Volume 38, Issue 1, 2019, Pages 81-100]
Complex Fourier shape functions
New DKFT Elements for the Finite Element Analysis of Thin
Viscoelastic Plates [Volume 38, Issue 1, 2019, Pages 81-100]
Component efficiency
Thermo-economic Analysis of Power Cycles [Volume 24, Issue 1, 2005, Pages 413-424]
Composite columns
Analysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method [Volume 24, Issue 1, 2005, Pages 391-399]
Compost Biofilter
The Performance of Compost Biofilter for Hydrogen Sulfide Removal from Contaminated Air [Volume 20, Issue 1, 2001, Pages 43-53]
Compressible core
Non-linear Response and Dynamic Buckling Analysis of a Cylindrical Sandwich Panel with a Flexible Core under Blast Loading [Volume 39, Issue 1, 2020, Pages 67-85]
Compressible flow
Simulation of Underwater Explosion with Cavitation using ALE Method [Volume 34, Issue 2, 2016, Pages 73-85]
Compressible Navier Stokes Equation
A Modified Flux Vector Splitting Scheme for Flow Analysis in Shock Wave Laminar Boundary Layer Interactions [Volume 20, Issue 2, 2001, Pages 167-180]
Compression Strength
Experimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC) [Volume 20, Issue 1, 2001, Pages 83-95]
Compressive strength
Effect of Limestone Powder on Compressive Strength of Concrete Containing Silica Fume and Optimization of Mix Design Using Response Surface Method [Volume 24, Issue 1, 2005, Pages 401-411]
Compressive strength
An Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete [Volume 25, Issue 2, 2006, Pages 31-49]
Computational fluid dynamic
Using Computational Fluid Dynamics for Determining the Optimum Pre-flush Fluid Injection Condition During Matrix Acidizing [Volume 41, Issue 2, 2022, Pages 117-136]
Computational fluid dynamics
Analysis of Various Inflow Turbulence Generation Methods in Large Eddy Simulation Approach for Prediction of Pollutant Dispersion around Model Buildings [Volume 35, Issue 2, 2016, Pages 85-112]
Computational fluid dynamics
Simulation of Non-Isothermal Flow of Rubber in Banbury Mixer Using Computational Fluid Dynamics [Volume 42, Issue 1, 2023, Pages 43-62]
Computational fluid dynamics
Hydrodynamic simulation of stirred gas-liquid bioreactor for the optimization of the rotation speed of Rushton impellers using CFD [Volume 42, Issue 2, 2023, Pages 109-128]
Computational Intelligence and Soft Computing Tools
Electricity Load Forecasting by Combining Adaptive Neuro-fuzzy Inference System and Seasonal Auto-Regressive Integrated Moving Average [Volume 38, Issue 1, 2019, Pages 119-129]
Computational methods
Estimation of PC-MRI Pressure Map Using Integral Form of Governing Equations and Spline Segments [Volume 27, Issue 1, 2008, Pages 117-133]
Computer application in industry
Application of Radon Transform in Detecting Turning Angle of Bodies and in Reading Multi - Lingual Documents [Volume 22, Issue 1, 2003, Pages 31-45]
Concrete
A New Method for Estimation of Creep of Concrete Using Short-TermTests under Higher Temperature [Volume 23, Issue 1, 2004, Pages 95-122]
Concrete
Effect of Limestone Powder on Compressive Strength of Concrete Containing Silica Fume and Optimization of Mix Design Using Response Surface Method [Volume 24, Issue 1, 2005, Pages 401-411]
Concrete
Investigation of Some Properties and Durability of Concrete in Urumie Lake [Volume 26, Issue 1, 2007, Pages 131-148]
Concrete
Extending Lattice Discrete Particle Model of Concrete for Non-circular Aggregates [Volume 35, Issue 1, 2016, Pages 11-25]
Concrete bridges
Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
Concrete pipe
Analysis of the Effect of Fluid Velocity on the Instability of Concrete Pipes Reinforced with Nanoparticles Conveying the Fluid Flow [Volume 38, Issue 2, 2019, Pages 63-81]
Concrete structures
Analytical Investigation of TADAS Damper Applied in Seismic Rehabilitation & Design of Concrete Structures [Volume 25, Issue 2, 2006, Pages 51-64]
Concurrent multiscale methods
A review of concurrent multiscale methods for the analysis of fine scale discontinuity problems [Volume 42, Issue 2, 2023, Pages 1-49]
Conical shell
Study of the Free Vibration of Joined Hybrid Cylindrical-Conical Shells with the Generalized Differential Quadrature Method [Volume 42, Issue 1, 2023, Pages 89-103]
Constitutive equation
Investigating the Stored Deformation Energy Distribution in a Polycrystalline Metal using a Dislocation Density-based Crystal Viscoplasticity Theory [Volume 37, Issue 2, 2018, Pages 1-15]
Constitutive model
A Constitutive Model for Sands [Volume 27, Issue 1, 2008, Pages 51-63]
Constitutive model
An Improvement of Vermeer-de Borst Constitutive Model for Numerical Simulation of the Shear Behavior of Rockfills [Volume 36, Issue 2, 2017, Pages 49-62]
Constrained optimal control
Design of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System [Volume 39, Issue 2, 2020, Pages 23-44]
Constrained optimal control
Design of an Optimal Cooperative Guidance Law Confronting Evaders with High Maneuver [Volume 42, Issue 1, 2023, Pages 1-18]
Constraint
Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]
Constraint Satisfaction Problems
A New Method for Solving Constraint Satisfaction Problems [Volume 23, Issue 1, 2004, Pages 1-13]
Continuum Damage Mechanics
Estimating High Cycle Fatigue Lifetime using Chaboche-Lemaitre Damage Model [Volume 35, Issue 1, 2016, Pages 27-41]
Control
Tracking Control of Uncertain Non - Iinear MIMO System Using Modified Sliding Surfaces for Attitude Large Maneuver of Satellites on Orbit [Volume 22, Issue 1, 2003, Pages 203-209]
Control
Control of Nonlinear Vibration in Bi-Stable Composite Plates using Fuzzy Logic [Volume 34, Issue 2, 2016, Pages 123-142]
Control by PC
Practical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC [Volume 22, Issue 1, 2003, Pages 1-16]
Convection
Effects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities [Volume 21, Issue 1, 2002, Pages 181-194]
Convergent-divergent nozzle
Developing a Shock-Capturing Formulation with Higher Performance to Capture Normal Standing Shock in All-Speed Regime [Volume 25, Issue 2, 2006, Pages 167-181]
Copper oxide
Annealing Effects on Microstructure and Microwave Properties of CuO-Doped (Zr0.8Sn0.2)TiO4 [Volume 27, Issue 2, 2008, Pages 199-211]
CORDIC algorithm
Computation of Trigonometric Functions by the Systolic Implementation of the CORDIC Algorithm [Volume 20, Issue 1, 2001, Pages 1-11]
Core-spun Yarns
Using Artificial Neural Network Algorithm to Predict Tensile Properties of Cotton-Covered Nylon Core Yarns [Volume 24, Issue 2, 2005, Pages 241-251]
Corotational elastic constitutive model
A Corotational Elastic Constitiutive Model and its Application to the Analysis of a Large Deformation Closed Cycle [Volume 23, Issue 1, 2004, Pages 147-161]
Corrective control
Application of Pattern Recognition Algorithms for Clustering Power System to Voltage Control Areas and Comparison of Their Results [Volume 20, Issue 2, 2001, Pages 27-42]
Corresion
Optimization of Cathodic Protection on Offshore Structures [Volume 26, Issue 1, 2007, Pages 49-63]
Corrosion
The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
Cotton/Polyester blend fabric
Hot Mercerizing of Cotton/Polyester Blend Fabric Effect of Alkali Treatment Temperature on Ttensile Properties , Weight Loss and Shrinkage of Fabric [Volume 24, Issue 1, 2005, Pages 355-365]
Coulomb shear strength parameters
Discrete Element Method for Modeling the Mechanical Behavior of Unsaturated Granular Material [Volume 35, Issue 1, 2016, Pages 157-181]
Coupled equations
Dynamic Analysis of Porous Media using Generalized Plasticity Model and Non-Darcy Flow Rule [Volume 38, Issue 1, 2019, Pages 101-118]
Cracked cantilever beam
Theoretical-experimental Determination of Nonlinear Crack Parameters in the Cracked Beam under Nonlinear Low Amplitude Vibration [Volume 36, Issue 1, 2017, Pages 85-98]
Crack growth
A Review of Peridynamics and its Applications; Part1: The Models based on Peridynamics [Volume 41, Issue 1, 2022, Pages 1-35]
Crack growth
A Review of Peridynamics and its Applications;
Part 2: Applications of Peridynamics to the Solution of Different Problems [Volume 41, Issue 2, 2022, Pages 1-28]
Crack growth
Feasibility Study of Three-Dimensional Crack Growth Modeling in Porous Media with Circular Pores Using Two-Dimensional Sections [Volume 41, Issue 2, 2022, Pages 29-60]
Crack propagation resistance
Thermal Stress Resistance to Fracture and its Relation to with Resistance to Thermal Fatigue and Shock [Volume 22, Issue 1, 2003, Pages 189-202]
Credit scoring
A Hybrid Intelligent Classification Model Based on Multilayer Perceptron Neural Networks and Fuzzy Regression for Credit Scoring Problems [Volume 37, Issue 2, 2018, Pages 97-111]
Crest width
Evaluation of Earth Dam Behavior against Earthquake with respect to Dam Height and Constitutive Model of Dam Materials [Volume 26, Issue 1, 2007, Pages 27-47]
Critical slip surface
A Rapid Optimization Method for Slip Surface in Earth Slopes Using Genetic Algorithm [Volume 25, Issue 2, 2006, Pages 93-112]
Cross Validation
The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
Cross Validation
Using Artificial Neural Network Algorithm to Predict Tensile Properties of Cotton-Covered Nylon Core Yarns [Volume 24, Issue 2, 2005, Pages 241-251]
Crouziex-Raviart element
A Hybridized Crouziex-Raviart Nonconforming Finite Element and Discontinuous Galerkin Method for a Two-Phase Flow in the Porous Media [Volume 38, Issue 2, 2019, Pages 1-22]
Crystalloacoustic
Investigation of Piezoelectric Coupling and Anisotropy Effect on Acoustic Wave Propagation at LithiumNiobate Crystalloacoustic [Volume 36, Issue 1, 2017, Pages 149-159]
Crystal plasticity
Investigating the Stored Deformation Energy Distribution in a Polycrystalline Metal using a Dislocation Density-based Crystal Viscoplasticity Theory [Volume 37, Issue 2, 2018, Pages 1-15]
Current Forced
Speed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method [Volume 20, Issue 1, 2001, Pages 13-28]
Curved pipe
Comparative Study of Laminar Convective Heat Transfer and Pressure Drop of Nanofluids through Curved Geometries [Volume 36, Issue 1, 2017, Pages 19-37]
CUSTOM 450
Numerical and Experimental Evaluation of Pitting Corrosion of CUSTOM 450 Stainless Steel Alloy in Chloride Environment [Volume 40, Issue 1, 2021, Pages 103-124]
Cutting force
Introducing A New Mathematical Model and Developing A Computer Package For 3-D Machining of Fiber Reinforced Polymer Composites [Volume 21, Issue 2, 2002, Pages 111-123]
Cutting patterns
An Algorithm for Two Dimensional Cutting Stock Problems with Demand [Volume 23, Issue 2, 2004, Pages 59-76]
Cyclic behavior
A Constitutive Model for Sands [Volume 27, Issue 1, 2008, Pages 51-63]
Cyclic reversal loading
Experimental Evaluation of Performance Criteria for Reinforced Concrete Beams under Cyclic Loading [Volume 25, Issue 1, 2006, Pages 63-77]
Cyclotene
Metalization of Polymers: Copper on Cyclotene [Volume 22, Issue 1, 2003, Pages 167-174]
Cylindrical sandwich panel
Non-linear Response and Dynamic Buckling Analysis of a Cylindrical Sandwich Panel with a Flexible Core under Blast Loading [Volume 39, Issue 1, 2020, Pages 67-85]
D
Daily Rainfall
The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
Damage
A Review of Peridynamics and its Applications; Part1: The Models based on Peridynamics [Volume 41, Issue 1, 2022, Pages 1-35]
Damage
A Review of Peridynamics and its Applications;
Part 2: Applications of Peridynamics to the Solution of Different Problems [Volume 41, Issue 2, 2022, Pages 1-28]
Damage Detection
Damage Detection in Beam and Rod using Wave Propagation Method with Spectral Finite Elements [Volume 35, Issue 2, 2016, Pages 197-210]
Damage Function
Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
Damage index
Seismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack [Volume 25, Issue 2, 2006, Pages 73-91]
Damage localization
Damage Identification in Shear Frames via Grey Relation Theory and Static Displacement Estimated by Limited Modal Data [Volume 34, Issue 1, 2016, Pages 139-154]
Dam height
Evaluation of Earth Dam Behavior against Earthquake with respect to Dam Height and Constitutive Model of Dam Materials [Volume 26, Issue 1, 2007, Pages 27-47]
Data filtering
Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data [Volume 24, Issue 1, 2005, Pages 77-95]
DC plating
Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current [Volume 23, Issue 2, 2004, Pages 197-205]
Deformation
The Pattern of Ground Deformations due to Circular Tunneling [Volume 22, Issue 2, 2003, Pages 83-102]
Deformation
A Numerical Study of Drop Motion in Poiseuille Flow [Volume 25, Issue 2, 2006, Pages 113-129]
Delta Wing
An Experimental Investigation of the Flowfield over a Low Aspect Ratio Wing [Volume 20, Issue 2, 2001, Pages 181-190]
Demand forecasting
Forecasting Capital Investment for Fixed-Telephony Network Switching Equipment in Tandem with NGN Migration Using Cobb-Douglas Model [Volume 27, Issue 1, 2008, Pages 1-16]
Dense Granular Material
Numerical Simulation of Granular Column Collapses with Pressure-Dependent Viscoplastic Model using the Smoothed Particle Hydrodynamic Method [Volume 38, Issue 2, 2019, Pages 23-41]
Dental endodontic implant
The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
Dependent observations
Optimum Local Decision Rules in a Distributed Detection System with Dependent Observations [Volume 25, Issue 2, 2006, Pages 1-10]
Deregulated Environment
Reactive Power Pricing in an Open Access Environment Considering Combined Optimum Voltage Profile and Voltage Stability [Volume 21, Issue 1, 2002, Pages 1-14]
Design
An Optimum Model for the Design of Airport Aprons [Volume 20, Issue 2, 2001, Pages 93-106]
Design
Optimal Design of Sewer Network Size using Ant Colony Optimization Algorithm: Comparing Performance of Four Different Algorithms [Volume 36, Issue 1, 2017, Pages 115-136]
Detecting structural damages
Structural Damage Detection using Frequency Response Function Index and Surrogate Model Based on Optimized Extreme Learning Machine Algorithm [Volume 36, Issue 1, 2017, Pages 1-17]
Detection Networks
Optimum Local Decision Rules in a Distributed Detection System with Dependent Observations [Volume 25, Issue 2, 2006, Pages 1-10]
Detonation
A Numerical Study of Dynamic Detonability Characteristics of Two-phase Unconfined Fuel-Air Clouds [Volume 24, Issue 2, 2005, Pages 105-122]
Detonation product
Determination of the Parameters in HOM and BKW Equations of State for Detonation Products [Volume 21, Issue 2, 2002, Pages 73-89]
Dielectric resonator
Annealing Effects on Microstructure and Microwave Properties of CuO-Doped (Zr0.8Sn0.2)TiO4 [Volume 27, Issue 2, 2008, Pages 199-211]
Differential procedure
A Heuristic Algorithm for Project Scheduling Problem to Maximizing the Net Present Value [Volume 25, Issue 2, 2006, Pages 11-30]
Diffusion flame
3-D Numerical Simulation of Gas Turbine Combustor [Volume 22, Issue 2, 2003, Pages 137-148]
Diffusion-induced stress
The Effect of Phase Separation on Diffusion Induced Stresses in Spherical and Cylindrical Electrode Particles [Volume 37, Issue 1, 2018, Pages 29-50]
Diffusion of particles
Smooth Particle Hydrodynamics Scheme for Numerical Simulation of Multiphase Flows With Complex Interface Surfaces [Volume 41, Issue 2, 2022, Pages 137-153]
Diffusion zone
Effect of Thermochemical Treatment on The Structure, Hardness and Wear Behavior of Electrolss Ni-P Coated 4140 Steel [Volume 23, Issue 2, 2004, Pages 185-195]
Dilative behavior
An Improvement of Vermeer-de Borst Constitutive Model for Numerical Simulation of the Shear Behavior of Rockfills [Volume 36, Issue 2, 2017, Pages 49-62]
Dilatometery
Microstructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation [Volume 23, Issue 1, 2004, Pages 189-201]
Direct reduction
Effects of Coating Golegohar-Chadormalu Pellet on Its Behaviour in Direct Reduction Process [Volume 24, Issue 1, 2005, Pages 425-433]
Discrete Density HMM
Presentation of K Nearest Neighbor Gaussian Interpolation and comparing it with Fuzzy Interpolation in Speech Recognition [Volume 23, Issue 2, 2004, Pages 1-10]
Discrete Element Method (DEM)
Discrete Element Method for Modeling the Mechanical Behavior of Unsaturated Granular Material [Volume 35, Issue 1, 2016, Pages 157-181]
Discrete utterance recogntion
Presentation of K Nearest Neighbor Gaussian Interpolation and comparing it with Fuzzy Interpolation in Speech Recognition [Volume 23, Issue 2, 2004, Pages 1-10]
Dispersion of particles
Analysis of Particle Dispersion in Turbulent Mixed Convection of CuO-water Nanofluid [Volume 36, Issue 2, 2017, Pages 35-47]
Displacement-based formulation
Simulation of Elastic Wave Propagation through Steel/Epoxy Phononic Crystal Waveguide by Displacement-Based Finite Difference Method [Volume 36, Issue 1, 2017, Pages 39-46]
Disruption
Designing a Closed Loop Supply Chain Network Considering the Supplier Disorder Risk and Production Time [Volume 37, Issue 2, 2018, Pages 61-78]
Dissimilar joint
Thermal Simulation of Friction Stir Welding in 304 Stainless Steel to 5083 Aluminum Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 101-117]
Distance protection
A Novel Method for Impedance Calculation of Distance Relays Using Third Order Interpolation [Volume 27, Issue 2, 2008, Pages 1-17]
Distance relay
A Novel Method for Impedance Calculation of Distance Relays Using Third Order Interpolation [Volume 27, Issue 2, 2008, Pages 1-17]
Distortion
The New Definitions for the Power Terms in Distorted and Unbalanced Conditions and Calculation of these Terms for an Electric Arc Furnace [Volume 23, Issue 2, 2004, Pages 207-215]
Distributed Detection
Optimum Local Decision Rules in a Distributed Detection System with Dependent Observations [Volume 25, Issue 2, 2006, Pages 1-10]
Distributed generation
Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
Distributed load
Buckling Analysis of FGM Timoshenko Beam with Variable Thickness under Concentrated and Distributed Axial loads Using DQM [Volume 41, Issue 1, 2022, Pages 135-154]
Distribution system
Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
Disturbance
Stability Analysis for Wake Flow Behind a Flat Plate [Volume 24, Issue 1, 2005, Pages 271-282]
Diversion structures
Numerical and Experimental Analysis of the Effect of Flow Discharge Ratio on Flow Separation at 45 Degree Open End Water Intake [Volume 24, Issue 1, 2005, Pages 213-232]
DKFT plate element
New DKFT Elements for the Finite Element Analysis of Thin
Viscoelastic Plates [Volume 38, Issue 1, 2019, Pages 81-100]
Domain integrals
A Review on Techniques of Domain Integrals Computation in Boundary Elements Method [Volume 42, Issue 1, 2023, Pages 77-88]
Double-layer grid space structures
Investigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse [Volume 26, Issue 1, 2007, Pages 149-164]
DQM
Analysis of the Effect of Fluid Velocity on the Instability of Concrete Pipes Reinforced with Nanoparticles Conveying the Fluid Flow [Volume 38, Issue 2, 2019, Pages 63-81]
DRI
The Effect of Foamy Slag on Power Consumption in Electric Arc Furnaces [Volume 21, Issue 1, 2002, Pages 195-206]
Drinking Water Wells
Fundamentals of the Capture Zone Calculations to Qualitatively Protect Cities Drinking Water Wells [Volume 23, Issue 2, 2004, Pages 77-91]
Drop
A Numerical Study of Drop Motion in Poiseuille Flow [Volume 25, Issue 2, 2006, Pages 113-129]
Droplet Deformation and break-up
Simulation of Deformation and Break-up of Droplets in the Presense of Electric Field in Porous Media Using Lattice Boltzmann Method [Volume 40, Issue 1, 2021, Pages 79-101]
Droplet internal circulation
Effect of Nondimensional Parameters On the Internal Circulation of a Liquid Drop Moving with the Surrounding Gas [Volume 21, Issue 1, 2002, Pages 167-179]
Dry cooling tower
Numerical and Analytical Study of Natural Dry Cooling Tower in a Steam Power Plant [Volume 26, Issue 1, 2007, Pages 183-195]
D-T
Energy Gain of Magnetized Cylindrical D-T Targets in Fast Ignition Fusion [Volume 27, Issue 1, 2008, Pages 65-83]
Dual reciprocity method
A Review on Techniques of Domain Integrals Computation in Boundary Elements Method [Volume 42, Issue 1, 2023, Pages 77-88]
Duct
Heat Transfer from a Tube Bank in Cross Flow in a Duct [Volume 24, Issue 1, 2005, Pages 315-325]
Ductile fracture
Ductile Damage Evolution under Triaxial Stress Conditions: Computational and Experimental Evaluations [Volume 25, Issue 2, 2006, Pages 151-165]
Ductility
Siesmic Assessment og Ductility and Strength Capacities of Low-Rise R. C. Buildings [Volume 20, Issue 2, 2001, Pages 55-75]
Ductility
Experimental Evaluation of Performance Criteria for Reinforced Concrete Beams under Cyclic Loading [Volume 25, Issue 1, 2006, Pages 63-77]
Ductility
Analytical Investigation of TADAS Damper Applied in Seismic Rehabilitation & Design of Concrete Structures [Volume 25, Issue 2, 2006, Pages 51-64]
Ductility
A Theoretical Study of the Behavior of Reinforced Concrete Columns Strengthened by Steel Plates and Transverse Reinforcements [Volume 25, Issue 2, 2006, Pages 65-72]
Durability
Investigation of Some Properties and Durability of Concrete in Urumie Lake [Volume 26, Issue 1, 2007, Pages 131-148]
Dynamic
Stress Analysis of Flight Vehicles under Flight Conditions [Volume 25, Issue 1, 2006, Pages 217-226]
Dynamic analysis
Evaluation of Earth Dam Behavior against Earthquake with respect to Dam Height and Constitutive Model of Dam Materials [Volume 26, Issue 1, 2007, Pages 27-47]
Dynamic analysis
Dynamic Analysis of Porous Media using Generalized Plasticity Model and Non-Darcy Flow Rule [Volume 38, Issue 1, 2019, Pages 101-118]
Dynamic analysis
Finite Difference Dynamic Stability and Liquefaction Analysis of Esphordi Mine Tailings Dam Implementing Non-Linear Elasto-Plastic Constitutive Model [Volume 40, Issue 2, 2021, Pages 57-79]
Dynamic analysis Stability
Dynamic and Stability Analysis of Flexible Cam-Follower Systems [Volume 22, Issue 2, 2003, Pages 117-136]
Dynamic behavior
Investigating the Dynamics of a Ball-Spring Autobalancer in a Rotor with Non-Linear Bearings [Volume 39, Issue 1, 2020, Pages 29-43]
Dynamic behavior
Simulation of Simplified Computational Model of Jacket Structure with Timoshenko Cantilever Beam and Experimental Signature [Volume 40, Issue 2, 2021, Pages 19-37]
Dynamic buckling
Non-linear Response and Dynamic Buckling Analysis of a Cylindrical Sandwich Panel with a Flexible Core under Blast Loading [Volume 39, Issue 1, 2020, Pages 67-85]
Dynamic Characteristics
Evaluation of Dynamic Characteristics of Marun Embankment Dam Using Ambient Vibration Test and FEM [Volume 22, Issue 1, 2003, Pages 109-127]
Dynamic instability
Dynamic Stability Analysis of FGM Beams Based on the Nonlinear Timoshenko Model [Volume 42, Issue 1, 2023, Pages 63-76]
Dynamic instability of wing
Determination of Dynamic Instability Speed of an Unsweep Wing in Subsonic Flow Including Compressibility Effects [Volume 26, Issue 1, 2007, Pages 197-207]
Dynamic modeling
Dynamics and Motion Control of Wheeled Robotic Systems [Volume 24, Issue 2, 2005, Pages 193-214]
Dynamic nonlinear analysis
Analytical Investigation of TADAS Damper Applied in Seismic Rehabilitation & Design of Concrete Structures [Volume 25, Issue 2, 2006, Pages 51-64]
Dynamic of Plates
Modelling Wave Propagation in Thin Plates with the pectral Modal Method [Volume 37, Issue 1, 2018, Pages 51-64]
Dynamic programming
An Efficient Algorithm for Reducing the Duality Gap in a Special Class of the Knapsack Problem [Volume 24, Issue 1, 2005, Pages 47-57]
Dynamic relaxation
Nonlinear Bending Analysis of Composite Cylindrical Shells Reinforced by Functionally Graded Carbon Nanotube in Circumferential Direction [Volume 36, Issue 1, 2017, Pages 47-65]
Dynamic snap-through
Investigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse [Volume 26, Issue 1, 2007, Pages 149-164]
Dynamic stability
Stability Analysis of a Beam under the Effect of Moving Masses using Homotopy Perturbation Method [Volume 34, Issue 1, 2016, Pages 79-95]
Dynamic stability
Dynamic Instability Analysis of Transverse Vibrations of Functionally Graded Rectangular Plates under Moving Masses [Volume 41, Issue 1, 2022, Pages 37-59]
Dynamic stall
Effect of Reduced Frequency on the Unsteady Aerodynamic Performance of a Wind Turbine Blade Section [Volume 26, Issue 1, 2007, Pages 247-268]
E
Earth dam
Evaluation of Earth Dam Behavior against Earthquake with respect to Dam Height and Constitutive Model of Dam Materials [Volume 26, Issue 1, 2007, Pages 27-47]
Earthquake
Nonlinear Analysis of Knee-braced Frames under Earthquake Loadings [Volume 22, Issue 2, 2003, Pages 103-116]
Earthquake
Evaluation of Earth Dam Behavior against Earthquake with respect to Dam Height and Constitutive Model of Dam Materials [Volume 26, Issue 1, 2007, Pages 27-47]
Earthquake
Investigation of Inclined Retaining Walls (Located on Slopes) Performance against Static and Earthquake Loads [Volume 26, Issue 2, 2007, Pages 17-31]
Earthquake base excitation
Study on the Dynamic Response of Single and Multi-Spans Beam Subjected to the Base Excitation Using Time Weighted Residual Method [Volume 40, Issue 1, 2021, Pages 1-15]
Earth slopes
A Rapid Optimization Method for Slip Surface in Earth Slopes Using Genetic Algorithm [Volume 25, Issue 2, 2006, Pages 93-112]
Effective lifetime
Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2003, Pages 73-81]
Eigen-Value
Buckling Analysis of Non-Prismatic Columns Subjected to Non-Uniform Loading Using the Meshless Local Petrov-Galerkin Method [Volume 40, Issue 2, 2021, Pages 39-56]
Elastic foundation
Nonlinear Buckling Analysis of Nano-composite Beam with Initial Geometrical Imperfection using Finite Element Method [Volume 36, Issue 2, 2017, Pages 79-98]
Elastic modulus
Influence of (SBR) Latex and Silica Fume on Properties and Performance of Cement - based Repair Concretes [Volume 26, Issue 2, 2007, Pages 33-47]
Elastic-plastic Bending-unbending
Bending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition [Volume 26, Issue 2, 2007, Pages 77-86]
Elastomericic property
Modeling the Vertical Falling Life Chute [Volume 27, Issue 2, 2008, Pages 149-154]
Elastoplastic modeling
A New Bond-Based Peridynamic Model with the Ability to Model Elastoplastic Behavior [Volume 42, Issue 1, 2023, Pages 125-139]
Elasto-viscoplastic
Evaluation of Sizing Press Mill Performance in Slab Width Reduction Using FE Simulation [Volume 26, Issue 1, 2007, Pages 269-283]
Electrical Breakdown
Evaluation of Electrical Breakdown of Anodic Films on Titanium in Phosphate-base Solutions [Volume 22, Issue 2, 2003, Pages 201-213]
Electric arc furnac
The New Definitions for the Power Terms in Distorted and Unbalanced Conditions and Calculation of these Terms for an Electric Arc Furnace [Volume 23, Issue 2, 2004, Pages 207-215]
Electric field
Simulation of Deformation and Break-up of Droplets in the Presense of Electric Field in Porous Media Using Lattice Boltzmann Method [Volume 40, Issue 1, 2021, Pages 79-101]
Electric potential
Stress Fields and Electric Potential in Piezoelectric Cylinders [Volume 26, Issue 2, 2007, Pages 1-16]
Electro deposition
Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current [Volume 23, Issue 2, 2004, Pages 197-205]
Electromagnetic damper
Design and Construction of an Electromagetic Supension System for Vehicles [Volume 20, Issue 2, 2001, Pages 1-16]
Electroplating
Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current [Volume 23, Issue 2, 2004, Pages 197-205]
Electropolished
Effect of Current Density and Surface Preparation of Steel on Morphology and Texture of Zinc Electrodeposits [Volume 23, Issue 2, 2004, Pages 173-184]
Element free Galerkin
Numerical Simulation of 2D Sediment Transport Equations via Element Free Galerkin [Volume 36, Issue 2, 2017, Pages 139-154]
Element Free method of Galerkin (EFG)
Analysis of Thin Isotropic and Orthotropic Plates with Element-Free Galerkin Method and Various Geometric Shapes [Volume 34, Issue 2, 2016, Pages 143-157]
Element Size
Evaluation of the Stability of Time Domain Boundary Element Method in Seismic Analysis of Heterogeneous Environments [Volume 41, Issue 2, 2022, Pages 61-82]
Embankment Dam
Evaluation of Dynamic Characteristics of Marun Embankment Dam Using Ambient Vibration Test and FEM [Volume 22, Issue 1, 2003, Pages 109-127]
Embedding
Combination of Adaptive-Grid Embedding and Redistribution Methods on Semi Structured Grids for two-dimensional invisid flows [Volume 27, Issue 2, 2008, Pages 123-137]
Empirical relations of sediment transport
Numerical Simulation of 2D Sediment Transport Equations via Element Free Galerkin [Volume 36, Issue 2, 2017, Pages 139-154]
Encased in concrete
Behavior of Castellated I Beams Encased in Concrete [Volume 24, Issue 1, 2005, Pages 121-134]
Energy detector
Performance Improvement of Radar Target Detection by Wavelet-based Denoising Methods [Volume 24, Issue 1, 2005, Pages 17-29]
Energy loss
Forced Hydraulic Jump by One and Two Continuous Sills in a Horizontal Stilling Basin. [Volume 24, Issue 1, 2005, Pages 97-119]
Energy reduction
Evaluation of Evaporative Cooling for Heat Transfer in the Condenser of Window-Air Conditioners [Volume 25, Issue 1, 2006, Pages 135-147]
Energy Saving
Effect of Using Evaporative Condenser Instead of Air Condenser in Window-air Conditioners [Volume 22, Issue 2, 2003, Pages 149-159]
Enriched finite element
Automatic Adaptive Finite Element Enrichement using Interpolation Cover Functions [Volume 37, Issue 2, 2018, Pages 79-96]
Enthalpy
Formation Mechanism and Enthalpy of Mixing of Nanocrystalline NiTi Intermetallic during Mechanical Alloying [Volume 26, Issue 2, 2007, Pages 59-70]
Entropy generation
Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
Environment
Investigation of the Behavior of Rubberized Concrete under Uniaxial Compressive Test [Volume 26, Issue 2, 2007, Pages 49-58]
EPS/SiCp preforms
Production of A356/SiCp Composite using EPS/SiCp/CMC Mortar [Volume 27, Issue 2, 2008, Pages 183-198]
Equilibrated basis functions
Solution of Harmonic Problems with Weak Singularities Using Equilibrated Basis Functions in Finite Element Method [Volume 39, Issue 2, 2020, Pages 119-146]
Equilibrated basis functions
Static Analysis of in-Plane Heterogeneous Laminated Composite Plates Using Equilibrated Basis Functions Based on FSDT [Volume 40, Issue 1, 2021, Pages 59-77]
Equilibrated basis functions
Scaled Boundary Finite Element Method Coupled with Equilibrated Basis Functions for Heat Transfer Problems [Volume 42, Issue 1, 2023, Pages 105-123]
Equilibrium
Methods of Reducing the Number of Effective ODs in Order to Solve Traffic Equilibrium Problem in Real Life Networks [Volume 20, Issue 1, 2001, Pages 97-111]
Equilibrium position
A Numerical Study of Drop Motion in Poiseuille Flow [Volume 25, Issue 2, 2006, Pages 113-129]
Erosion and Abrasion Resistance
investigation of Parameters Affecting Abrasion Resistance of R.C.C. [Volume 24, Issue 1, 2005, Pages 155-176]
Essential creep
A New Method for Estimation of Creep of Concrete Using Short-TermTests under Higher Temperature [Volume 23, Issue 1, 2004, Pages 95-122]
Euler
Combination of Adaptive-Grid Embedding and Redistribution Methods on Semi Structured Grids for two-dimensional invisid flows [Volume 27, Issue 2, 2008, Pages 123-137]
Euler-Bernoulli beam
Study on the Dynamic Response of Single and Multi-Spans Beam Subjected to the Base Excitation Using Time Weighted Residual Method [Volume 40, Issue 1, 2021, Pages 1-15]
Euler–Bernoulli Beam
On the Performance of Linear and Nonlinear Dynamic Absorbers for Beams Subjected to Moving Loads [Volume 36, Issue 1, 2017, Pages 99-113]
Euler equation
A New Implicit Dissipation Term for Solving 3D Euler Equations on Unstructured Grids by GMRES+LU-SGS Scheme [Volume 24, Issue 1, 2005, Pages 233-249]
Euler flow equations
Developing a Shock-Capturing Formulation with Higher Performance to Capture Normal Standing Shock in All-Speed Regime [Volume 25, Issue 2, 2006, Pages 167-181]
Eulerian-Lagrangian two-phase model
Comparison of Homogenous and Buongiorno’ Model with Eulerian-Lagrangian Model for Nanofluids Heat Transfer in a Microchannel [Volume 41, Issue 2, 2022, Pages 101-116]
Eulerian Method
Evaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds [Volume 41, Issue 1, 2022, Pages 155-174]
Euler method
Seismic Wave-Field Propagation Modelling using the Euler Method [Volume 38, Issue 2, 2019, Pages 115-123]
Evaluation Criteria
A Meta-heuristic Algorithm for Global Numerical Optimization Problems inspired by Vortex in fluid physics [Volume 41, Issue 1, 2022, Pages 101-119]
Evaporative cooler
Effect of Using Evaporative Condenser Instead of Air Condenser in Window-air Conditioners [Volume 22, Issue 2, 2003, Pages 149-159]
Evaporative cooling
Evaluation of Evaporative Cooling for Heat Transfer in the Condenser of Window-Air Conditioners [Volume 25, Issue 1, 2006, Pages 135-147]
Evolutionary
Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]
EWMA
Economic Design of R2R Controller using EWMA Procedure [Volume 24, Issue 2, 2005, Pages 15-28]
Exact analytical solution
Analytical and Numerical Study on the Buckling of Homogeneous Beams Coated by a Functionally Graded Porous Layer with Different Boundary Conditions [Volume 41, Issue 1, 2022, Pages 61-77]
Exact solution
Vibration and Stability of Axially Moving Plates by Standard and Spectral Finite Element Methods [Volume 26, Issue 1, 2007, Pages 1-12]
Exchange rate
Using a Fuzzy Auto Regressive Integrated Moving Average Model for Exchange Rate Forecasting [Volume 26, Issue 2, 2007, Pages 67-75]
Exergy analysis
Thermo-economic Analysis of Power Cycles [Volume 24, Issue 1, 2005, Pages 413-424]
Experimental
Fundamentals Design and Set up Radial Inflow Gas Turbine Research Lab [Volume 21, Issue 2, 2002, Pages 61-71]
Experimental method
Heat Transfer from a Tube Bank in Cross Flow in a Duct [Volume 24, Issue 1, 2005, Pages 315-325]
Experimental model
Experimental Results of Pressure Fluctuations in a Water Conduit Section Due to Formation of Unstable Two-Phase Air-Water Flow [Volume 24, Issue 2, 2005, Pages 69-86]
Explicit finite element method
Evaluation of Sizing Press Mill Performance in Slab Width Reduction Using FE Simulation [Volume 26, Issue 1, 2007, Pages 269-283]
Explosion simulation
Determination of the Parameters in HOM and BKW Equations of State for Detonation Products [Volume 21, Issue 2, 2002, Pages 73-89]
Extended Finite Element Method (XFEM)
Comparison between Isogeometric Analysis and Extended Finite Element Methods in Discontinuities Modeling and Stress Intensity Factor Calculation [Volume 35, Issue 1, 2016, Pages 83-109]
Extreme Learning Machine (ELM) algorithm
Structural Damage Detection using Frequency Response Function Index and Surrogate Model Based on Optimized Extreme Learning Machine Algorithm [Volume 36, Issue 1, 2017, Pages 1-17]
Extrusion
Optimalization of Die Shap and Flow Lines in Non-Linear Dies in Extrusion of Non-Circular Sections [Volume 26, Issue 1, 2007, Pages 285-299]
Extrusion
Grafting of Maleic Anhydride onto Co)propylene-b-ethylene( by Extrusion Process: Measurement of Adhesion to Steel Surface [Volume 26, Issue 1, 2007, Pages 313-322]
F
Facility layout
Application of Fuzzy Decision-Making to Facility Layout Planning [Volume 27, Issue 2, 2008, Pages 31-47]
Failure Criteria
Effect of Failure Criteria on Stress and Strain Analysis of Asphalt Pavement in Tropical Areas [Volume 27, Issue 1, 2008, Pages 143-150]
Failure load
Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data [Volume 24, Issue 1, 2005, Pages 77-95]
Failure mechanism
Siesmic Assessment og Ductility and Strength Capacities of Low-Rise R. C. Buildings [Volume 20, Issue 2, 2001, Pages 55-75]
Failure possibility
Random - weighted Monte Carlo Simulation Method for Structural Reliability Analysis [Volume 37, Issue 2, 2018, Pages 41-60]
Far-Field Approximation
Analysis of Large-Scale Heat Conduction Problems Using a Modified Single-Level Fast Multipole Method [Volume 41, Issue 2, 2022, Pages 83-100]
Farsi Printed text
A Modified Character Segmentation Algorithm for Farsi Printed Text Using Upper Contour Labelling [Volume 23, Issue 1, 2004, Pages 33-48]
Fast Multipole Method
Analysis of Large-Scale Heat Conduction Problems Using a Modified Single-Level Fast Multipole Method [Volume 41, Issue 2, 2022, Pages 83-100]
Fault detection
Fault Detection of Plain Circular Knitted Fabrics Using Wavelet Transform [Volume 23, Issue 1, 2004, Pages 221-227]
Feasible Direction
Calculation of Optimum Dimensions and Array of Submerged Vanes at Intakes Using the Feasible Direction Method [Volume 20, Issue 2, 2001, Pages 207-215]
Feedback linearization
Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory [Volume 22, Issue 2, 2003, Pages 21-34]
FerroTic
Investigation of Defects in Ferro-Tic Composites and their Prevention [Volume 25, Issue 1, 2006, Pages 167-178]
Fexible flowshp
Minimizing Total Weighted Tardiness in a Flexible Flowshop Environment Considering Batch Processing Machines [Volume 39, Issue 1, 2020, Pages 105-133]
Fiber composite Materials
Introducing A New Mathematical Model and Developing A Computer Package For 3-D Machining of Fiber Reinforced Polymer Composites [Volume 21, Issue 2, 2002, Pages 111-123]
Fiber orientation
Introducing A New Mathematical Model and Developing A Computer Package For 3-D Machining of Fiber Reinforced Polymer Composites [Volume 21, Issue 2, 2002, Pages 111-123]
Fibers
A Comparison between Kubelka-Munk and Geometric Models for Prediction of Reflectance Factor of Transparent Fibers [Volume 26, Issue 2, 2007, Pages 31-45]
Fiber spinning-in coefficient
Effects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns [Volume 24, Issue 1, 2005, Pages 367-380]
Finite cell method
Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
Finite-Difference Numerical Method
Finite Difference Dynamic Stability and Liquefaction Analysis of Esphordi Mine Tailings Dam Implementing Non-Linear Elasto-Plastic Constitutive Model [Volume 40, Issue 2, 2021, Pages 57-79]
Finite difference time domain
Simulation of Elastic Wave Propagation through Steel/Epoxy Phononic Crystal Waveguide by Displacement-Based Finite Difference Method [Volume 36, Issue 1, 2017, Pages 39-46]
Finite Element
Thermal Analysis of Tire [Volume 20, Issue 1, 2001, Pages 137-149]
Finite Element
Evaluating the Soil Bearing Capacity Coefficients by Means of a Finite Element Program Based on Elasto - Plastic Mohr - Coulomb Behavior [Volume 22, Issue 1, 2003, Pages 75-90]
Finite Element
Seepage Analysis through Rockfill Dams by Finite Element Method in a Fixed Gird [Volume 22, Issue 1, 2003, Pages 91-108]
Finite Element
Vibration and Stability of Axially Moving Plates by Standard and Spectral Finite Element Methods [Volume 26, Issue 1, 2007, Pages 1-12]
Finite element analysis
FE-Based Analysis of Hot Forming Process Using the Flow Stress Prediction Model [Volume 22, Issue 1, 2003, Pages 143-153]
Finite element analysis
Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
Finite element analysis
Low Velocity Impact Damage Prediction in Laminated Composite Plates [Volume 38, Issue 1, 2019, Pages 37-62]
Finite Element Method (FEM)
Free and Forced Vibrations of a Shaft and Propeller Using the Couple of Finite Volume Method, Boundary Element Method
and Finite Element Method [Volume 34, Issue 2, 2016, Pages 13-36]
Finite elements
A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results [Volume 22, Issue 1, 2003, Pages 57-73]
Finite elements
Investigating the Stored Deformation Energy Distribution in a Polycrystalline Metal using a Dislocation Density-based Crystal Viscoplasticity Theory [Volume 37, Issue 2, 2018, Pages 1-15]
Finite Isotropic Plates
Optimized Design of Finite Isotropic Plates with Hexagonal Cutout by Metaheuristic Algorithms [Volume 37, Issue 1, 2018, Pages 107-132]
Finite strain plasticity
Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
Finite Strip Method
Buckling of Thick Laminated Composite Plates Based on Zigzag and Third order Shear Deformation Theories using the Finite Strip Method [Volume 37, Issue 1, 2018, Pages 83-105]
Finite Strip Method
Thermal Buckling Analysis of Graphene Nanoplates Based on the Modified Couple Stress Theory using Finite Strip Method and Two-Variable Refined Plate Theory [Volume 38, Issue 2, 2019, Pages 43-61]
Finite Volume Method (FVM)
Free and Forced Vibrations of a Shaft and Propeller Using the Couple of Finite Volume Method, Boundary Element Method
and Finite Element Method [Volume 34, Issue 2, 2016, Pages 13-36]
Finn-Byrne
Finite Difference Dynamic Stability and Liquefaction Analysis of Esphordi Mine Tailings Dam Implementing Non-Linear Elasto-Plastic Constitutive Model [Volume 40, Issue 2, 2021, Pages 57-79]
Firefly algorithm
Design of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System [Volume 39, Issue 2, 2020, Pages 23-44]
First–order Precise Integration Method (PIM)
Enhancement of Precise Integration Method for Dynamic Structural Analysis using Inversion of State Matrix [Volume 35, Issue 2, 2016, Pages 159-176]
First-order shear deformation theory
Buckling Analysis of Variable Stiffness Composite Laminates by Semi-Analytical Finite Strip Method [Volume 39, Issue 2, 2020, Pages 73-95]
Fixed grid
Seepage Analysis through Rockfill Dams by Finite Element Method in a Fixed Gird [Volume 22, Issue 1, 2003, Pages 91-108]
Fixed grid finite element method
Modified Fixed Grid Finite Element Method in the Analysis of 2D Linear Elastic Problems [Volume 27, Issue 2, 2008, Pages 103-122]
Fixed-telephony network
Forecasting Capital Investment for Fixed-Telephony Network Switching Equipment in Tandem with NGN Migration Using Cobb-Douglas Model [Volume 27, Issue 1, 2008, Pages 1-16]
FLAC 2D software
Effect of Underground Structure on PGA at Ground Surface Considering Linear and Nonlinear Behaviour for the Soil [Volume 34, Issue 1, 2016, Pages 119-137]
Flame bending process
Thermo-Elastic-Plastic Analysis of Plate Forming Process by Flame Bending Method [Volume 24, Issue 2, 2005, Pages 159-170]
Flexible elements
Near-Minimum Time Optimal Control of Flexible Spacecraft during Slewing Maneuver [Volume 24, Issue 2, 2005, Pages 123-135]
Flexible time horizon
Multi-mode Resource Constrained Project Selection and Scheduling Considering the Reinvestment Strategy in a Flexible Time Horizon [Volume 40, Issue 1, 2021, Pages 17-42]
Flex pass
Effect of Failure Criteria on Stress and Strain Analysis of Asphalt Pavement in Tropical Areas [Volume 27, Issue 1, 2008, Pages 143-150]
Floque theorem
Desing And Implementation of Adaptive Active Filters for Exact Estimation And Elimination of AC Network Distortions [Volume 21, Issue 2, 2002, Pages 29-44]
Floquet Theory
Dynamic and Stability Analysis of Flexible Cam-Follower Systems [Volume 22, Issue 2, 2003, Pages 117-136]
Flotation
Processing of Low Grade Fine Manganese Ore Using Flotation Method [Volume 21, Issue 2, 2002, Pages 159-166]
Flotation
Laboratory Scale Determination of Optimum Flotation Conditions of Chalcocite at the Sarcheshmeh Copper Complex Using the Taguchi Method [Volume 23, Issue 1, 2004, Pages 211-220]
Flow pattern
Experimental Results of Pressure Fluctuations in a Water Conduit Section Due to Formation of Unstable Two-Phase Air-Water Flow [Volume 24, Issue 2, 2005, Pages 69-86]
Flow separation
Numerical and Experimental Analysis of the Effect of Flow Discharge Ratio on Flow Separation at 45 Degree Open End Water Intake [Volume 24, Issue 1, 2005, Pages 213-232]
Flow stress
FE-Based Analysis of Hot Forming Process Using the Flow Stress Prediction Model [Volume 22, Issue 1, 2003, Pages 143-153]
Flutter
Determination of Dynamic Instability Speed of an Unsweep Wing in Subsonic Flow Including Compressibility Effects [Volume 26, Issue 1, 2007, Pages 197-207]
Flux Vector splitting
A Modified Flux Vector Splitting Scheme for Flow Analysis in Shock Wave Laminar Boundary Layer Interactions [Volume 20, Issue 2, 2001, Pages 167-180]
Font design
Automatic Design of Persian Typefaces [Volume 20, Issue 1, 2001, Pages 113-126]
Forced
Effects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities [Volume 21, Issue 1, 2002, Pages 181-194]
Forced convection
Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator [Volume 26, Issue 1, 2007, Pages 209-219]
Forced convection heat transfer
Investigation on the effect of magnetic field on forced convection heat transfer of liquid metals in a microchannel heat sink [Volume 42, Issue 2, 2023, Pages 149-166]
FPGA
Computation of Trigonometric Functions by the Systolic Implementation of the CORDIC Algorithm [Volume 20, Issue 1, 2001, Pages 1-11]
FPGA and HDL
Design and Implementation of a High Speed Systolic Serial Multiplier and Squarer for Long Unsigned Integer Using VHDL [Volume 26, Issue 2, 2007, Pages 1-14]
Fracture mechanics
Estimation of the Stress Intensity Factors for Surface Cracks in Spherical Electrode Particles Subject to Phase Separation [Volume 39, Issue 2, 2020, Pages 97-117]
Fracture mechanics
A Review of Peridynamics and its Applications; Part1: The Models based on Peridynamics [Volume 41, Issue 1, 2022, Pages 1-35]
Fracture mechanics
A Review of Peridynamics and its Applications;
Part 2: Applications of Peridynamics to the Solution of Different Problems [Volume 41, Issue 2, 2022, Pages 1-28]
Fracture strength
Evaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds [Volume 21, Issue 2, 2002, Pages 145-158]
Fragility analysis
Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
Free Convection Heat Transfer Enhancement
Heat Transfer Enhancement of Al2O3âH2O Nanofluid Free Convection in Two-Phase Flow with Internal Heat Generation Using Two Dimensional Lattice Boltzmann Method [Volume 40, Issue 2, 2021, Pages 1-18]
Free surface flow
Numerical Simulation of Free Surface Flows and Comparison of Symmetry and Real Boundary Conditions at the Free Surface [Volume 22, Issue 2, 2003, Pages 161-176]
Free vibration
Probabilistic Evaluation on the Free Vibration of Functionally Graded Material Plates Using 3D Solution and Meta-Model Methods [Volume 39, Issue 1, 2020, Pages 45-66]
Free vibration
Vibration Analysis of Thick Sandwich Plates with Saturated
FG-Porous Core Using Quasi-3D Shear Deformation Theory [Volume 42, Issue 1, 2023, Pages 19-41]
Free vibration
Study of the Free Vibration of Joined Hybrid Cylindrical-Conical Shells with the Generalized Differential Quadrature Method [Volume 42, Issue 1, 2023, Pages 89-103]
Free vibration
Free Vibration Analysis of Polymer/Graphene Nanoplatelet/Fiber Truncated Conical Shells Embedded in an Elastic Foundation [Volume 42, Issue 2, 2023, Pages 69-86]
Freeze-thaw durability
An Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete [Volume 25, Issue 2, 2006, Pages 31-49]
Fretting fatigue
Studying the Effect of Fillet on Fretting Fatigue Strength in the Press-Fitted Axle Assembly using Different Multiaxial Fatigue Criteria and Fretting Fatigue Damage Darameter [Volume 34, Issue 2, 2016, Pages 159-175]
Friction factor
Application of Modified Slab Method in Asymmetrical Plate Rolling [Volume 24, Issue 2, 2005, Pages 137-158]
Friction stir welding
Thermal Simulation of Friction Stir Welding in 304 Stainless Steel to 5083 Aluminum Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 101-117]
Friction welding
Evaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds [Volume 21, Issue 2, 2002, Pages 145-158]
Front tracking
A Second Order Accurate Method in Simulation of Underwater Explosion [Volume 23, Issue 2, 2004, Pages 133-149]
Functionally Graded
Statistical Analysis of Energy Harvesting From Functionally Graded Cantilever Beam with Piezoelectric Layer [Volume 40, Issue 2, 2021, Pages 95-108]
Functionally graded material
Probabilistic Evaluation on the Free Vibration of Functionally Graded Material Plates Using 3D Solution and Meta-Model Methods [Volume 39, Issue 1, 2020, Pages 45-66]
Functionally graded material
Dynamic Stability Analysis of FGM Beams Based on the Nonlinear Timoshenko Model [Volume 42, Issue 1, 2023, Pages 63-76]
Functionally Graded Material (FGM)
Nonlinear Bending Analysis of Micro/Nano Rectangular and Annular Sector Plates Using a Modified Higher-Order Shear Deformation Theory and the Modified Couple Stress Theory [Volume 40, Issue 1, 2021, Pages 43-58]
Functionally graded plate
Dynamic Instability Analysis of Transverse Vibrations of Functionally Graded Rectangular Plates under Moving Masses [Volume 41, Issue 1, 2022, Pages 37-59]
Functionally graded porous material
Analytical and Numerical Study on the Buckling of Homogeneous Beams Coated by a Functionally Graded Porous Layer with Different Boundary Conditions [Volume 41, Issue 1, 2022, Pages 61-77]
Fuzzy Clustering
Water Quality Zoning of Rivers by the Technique of Fuzzy Clustering Analysis [Volume 20, Issue 1, 2001, Pages 55-68]
Fuzzy C-Means algorithm
Application of Pattern Recognition Algorithms for Clustering Power System to Voltage Control Areas and Comparison of Their Results [Volume 20, Issue 2, 2001, Pages 27-42]
Fuzzy decision-making
Application of Fuzzy Decision-Making to Facility Layout Planning [Volume 27, Issue 2, 2008, Pages 31-47]
Fuzzy Interpolation
Presentation of K Nearest Neighbor Gaussian Interpolation and comparing it with Fuzzy Interpolation in Speech Recognition [Volume 23, Issue 2, 2004, Pages 1-10]
Fuzzy Kohonen algorithm
Application of Pattern Recognition Algorithms for Clustering Power System to Voltage Control Areas and Comparison of Their Results [Volume 20, Issue 2, 2001, Pages 27-42]
Fuzzy regression
Using a Fuzzy Auto Regressive Integrated Moving Average Model for Exchange Rate Forecasting [Volume 26, Issue 2, 2007, Pages 67-75]
Fuzzy reliability
Fuzzy Structural Reliability Analysis using the Dynamic Directional Stability Transformation Method [Volume 37, Issue 1, 2018, Pages 133-148]
G
GA
Minimizing Stoppage Cost of an Assembly Line Using Genetic Algorithm [Volume 27, Issue 1, 2008, Pages 35-50]
Galloping
Simulation of Single Conductors Galloping Oscillations and Estimation of their Maximum Amplitudes [Volume 22, Issue 1, 2003, Pages 47-55]
Gas absorbtivity and emissivity
Temperature Distribution of a Non gray Gas between Two Parallel Planes Using Exponential Wide Band Model [Volume 24, Issue 1, 2005, Pages 299-314]
Gas-Liquid Bioreactor
Hydrodynamic simulation of stirred gas-liquid bioreactor for the optimization of the rotation speed of Rushton impellers using CFD [Volume 42, Issue 2, 2023, Pages 109-128]
Gas radiation
Temperature Distribution of a Non gray Gas between Two Parallel Planes Using Exponential Wide Band Model [Volume 24, Issue 1, 2005, Pages 299-314]
Gas-Solid Fluidized Bed
Evaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds [Volume 41, Issue 1, 2022, Pages 155-174]
Gaussian Interpolation
Presentation of K Nearest Neighbor Gaussian Interpolation and comparing it with Fuzzy Interpolation in Speech Recognition [Volume 23, Issue 2, 2004, Pages 1-10]
GDQM
Study of the Free Vibration of Joined Hybrid Cylindrical-Conical Shells with the Generalized Differential Quadrature Method [Volume 42, Issue 1, 2023, Pages 89-103]
Generalized differential quadrature method
Analytical and Numerical Study on the Buckling of Homogeneous Beams Coated by a Functionally Graded Porous Layer with Different Boundary Conditions [Volume 41, Issue 1, 2022, Pages 61-77]
Generalized plasticity
Dynamic Analysis of Porous Media using Generalized Plasticity Model and Non-Darcy Flow Rule [Volume 38, Issue 1, 2019, Pages 101-118]
Generation allocation
A New Generation Allocation and Expansion Planning Algorithm Including Transmission System Effects [Volume 24, Issue 1, 2005, Pages 1-15]
Generation Expansion Planning
A New Generation Allocation and Expansion Planning Algorithm Including Transmission System Effects [Volume 24, Issue 1, 2005, Pages 1-15]
Genetic aigorithms
Optimization of Cathodic Protection on Offshore Structures [Volume 26, Issue 1, 2007, Pages 49-63]
Genetic- Fuzzy Method
A New Multi-Objective Optimization Method Based on Genetic- Fuzzy Algorithm and its Application in Induction Motor Speed Control [Volume 20, Issue 1, 2001, Pages 29-42]
Geometric model
Using the Geometric Model to Explain the Longitudinal and CrossâSectional Reflection Behaviors of Acrylic yarns [Volume 21, Issue 2, 2002, Pages 167-180]
Geometric model
A Comparison between Kubelka-Munk and Geometric Models for Prediction of Reflectance Factor of Transparent Fibers [Volume 26, Issue 2, 2007, Pages 31-45]
Geostatistics
The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
GFRC
Experimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC) [Volume 20, Issue 1, 2001, Pages 83-95]
GMRES+LU-SGS
A New Implicit Dissipation Term for Solving 3D Euler Equations on Unstructured Grids by GMRES+LU-SGS Scheme [Volume 24, Issue 1, 2005, Pages 233-249]
Godunov scheme
A Second Order Accurate Method in Simulation of Underwater Explosion [Volume 23, Issue 2, 2004, Pages 133-149]
Graphene nanoplate
Thermal Buckling Analysis of Graphene Nanoplates Based on the Modified Couple Stress Theory using Finite Strip Method and Two-Variable Refined Plate Theory [Volume 38, Issue 2, 2019, Pages 43-61]
Graphene nanoplatelet (GNPs)
Free Vibration Analysis of Polymer/Graphene Nanoplatelet/Fiber Truncated Conical Shells Embedded in an Elastic Foundation [Volume 42, Issue 2, 2023, Pages 69-86]
Green functions
Coupled Flap-Lag-Torsional Vibration Analysis of Pre-twisted Non-uniform Helicopter Blades [Volume 26, Issue 1, 2007, Pages 165-182]
Grey Relation Theory
Damage Identification in Shear Frames via Grey Relation Theory and Static Displacement Estimated by Limited Modal Data [Volume 34, Issue 1, 2016, Pages 139-154]
Grid dispersion
Two Dimensional Complex Wavenumber Dispersion Analysis
using B-Spline Finite Elements Method [Volume 34, Issue 2, 2016, Pages 37-50]
Grooved rotor
Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator [Volume 26, Issue 1, 2007, Pages 209-219]
Guide rolls
Ring Rolling FE Analysis in The Presence of the Guide Rolls [Volume 21, Issue 2, 2002, Pages 91-110]
Gypsum board
Numerical Modeling and Seismic Performance of Strap Braced Shear Walls Sheathed by Gypsum Board [Volume 37, Issue 2, 2018, Pages 113-138]
H
Half-corrugated channel
Numerical Simulation of Turbulent Half-corrugated Channel Flow by Hydrophilic and Hydrophobic Surfaces [Volume 36, Issue 2, 2017, Pages 1-20]
Handle
Hot Mercerizing of Cotton/Polyester Blend Fabric Effect of Alkali Treatment Temperature on Ttensile Properties , Weight Loss and Shrinkage of Fabric [Volume 24, Issue 1, 2005, Pages 355-365]
Hardening behavior
An Improvement of Vermeer-de Borst Constitutive Model for Numerical Simulation of the Shear Behavior of Rockfills [Volume 36, Issue 2, 2017, Pages 49-62]
Harmonic
Solution of Harmonic Problems with Weak Singularities Using Equilibrated Basis Functions in Finite Element Method [Volume 39, Issue 2, 2020, Pages 119-146]
Harmonics
Genetic Algorithm- Based Active Power Filter Allocation and Size Determination [Volume 21, Issue 1, 2002, Pages 29-41]
Harmonic waves
Simulation of Harmonic Waves Generated by the Piston-type Wave-maker in the Wave Flume via the Exponential Basis Functions Mesh-free Method and MEL Formulation [Volume 37, Issue 1, 2018, Pages 1-9]
Heat Conduction
Analysis of Large-Scale Heat Conduction Problems Using a Modified Single-Level Fast Multipole Method [Volume 41, Issue 2, 2022, Pages 83-100]
Heat exchanger
Investigation of the Effect of Geometry and Type of Nanofluids on the Heat Transfer Inside the Microchannel using Computational Fluid Dynamics (CFD) [Volume 38, Issue 1, 2019, Pages 63-79]
Heat generation/absorption coefficient
The Effect of Magnetic Field and Nanoparticle Shape on Heat Transfer in an Inclined Cavity with Uniform Heat Generation/Absorption [Volume 40, Issue 2, 2021, Pages 109-126]
Heat Sink
Determination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids [Volume 22, Issue 1, 2003, Pages 129-142]
Heat Sink
Investigation on the effect of magnetic field on forced convection heat transfer of liquid metals in a microchannel heat sink [Volume 42, Issue 2, 2023, Pages 149-166]
Heat transfer
Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator [Volume 26, Issue 1, 2007, Pages 209-219]
Heat transfer
Numerical Study of Viscous Dissipation and Roughness Effects on Fluid Flow and Heat Transfer in Microchannels using Perturbation Method [Volume 35, Issue 1, 2016, Pages 143-156]
Heat transfer
Investigation of the Effect of Geometry and Type of Nanofluids on the Heat Transfer Inside the Microchannel using Computational Fluid Dynamics (CFD) [Volume 38, Issue 1, 2019, Pages 63-79]
Heat transfer
Evaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds [Volume 41, Issue 1, 2022, Pages 155-174]
Heat transfer enhancement
Effect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate [Volume 27, Issue 1, 2008, Pages 103-115]
Heterogeneity anisotropy
The Effect of Mechanical Anisotropy and Heterogeneity of Shear Strength Parameters of Soils on Drained Bearing Capacity of Shallow Foundations [Volume 36, Issue 1, 2017, Pages 137-147]
Heterogeneous
Static Analysis of in-Plane Heterogeneous Laminated Composite Plates Using Equilibrated Basis Functions Based on FSDT [Volume 40, Issue 1, 2021, Pages 59-77]
Heuristic
Solving Bus Terminal Location Problem Using Simulated Annealing Method [Volume 20, Issue 2, 2001, Pages 125-140]
Heuristic method
Net Present Value of Cash Flows in Single Machine and Flow Shop Scheduling Problems [Volume 27, Issue 2, 2008, Pages 49-65]
Highly Maneuverable Evader
Design of an Optimal Cooperative Guidance Law Confronting Evaders with High Maneuver [Volume 42, Issue 1, 2023, Pages 1-18]
High-order finite element method
Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
High power converter
Analysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype [Volume 23, Issue 2, 2004, Pages 25-38]
Highway capacity
An Improved Methodology for Measurement of Uninterrupted â Flow Capacity Affected by Pavement Condition [Volume 26, Issue 1, 2007, Pages 79-91]
Histogram
A Modified Character Segmentation Algorithm for Farsi Printed Text Using Upper Contour Labelling [Volume 23, Issue 1, 2004, Pages 33-48]
HOM
Determination of the Parameters in HOM and BKW Equations of State for Detonation Products [Volume 21, Issue 2, 2002, Pages 73-89]
Homogeneous one-phase model
Comparison of Homogenous and Buongiorno’ Model with Eulerian-Lagrangian Model for Nanofluids Heat Transfer in a Microchannel [Volume 41, Issue 2, 2022, Pages 101-116]
Homotopy analysis method
Dynamic Instability Analysis of Transverse Vibrations of Functionally Graded Rectangular Plates under Moving Masses [Volume 41, Issue 1, 2022, Pages 37-59]
Hoop stress
Stress Fields and Electric Potential in Piezoelectric Cylinders [Volume 26, Issue 2, 2007, Pages 1-16]
Hot deformation
Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
Hot forming
FE-Based Analysis of Hot Forming Process Using the Flow Stress Prediction Model [Volume 22, Issue 1, 2003, Pages 143-153]
Hot mercerizing
Hot Mercerizing of Cotton/Polyester Blend Fabric Effect of Alkali Treatment Temperature on Ttensile Properties , Weight Loss and Shrinkage of Fabric [Volume 24, Issue 1, 2005, Pages 355-365]
Hot powder extrusion
Investigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion [Volume 25, Issue 1, 2006, Pages 179-188]
Hot upsetting process
FE-Based Analysis of Hot Forming Process Using the Flow Stress Prediction Model [Volume 22, Issue 1, 2003, Pages 143-153]
Hybrid
Study of the Free Vibration of Joined Hybrid Cylindrical-Conical Shells with the Generalized Differential Quadrature Method [Volume 42, Issue 1, 2023, Pages 89-103]
Hybrid Controller r
Dynamic Modeling and Control of a Tethered Space Robot [Volume 35, Issue 1, 2016, Pages 111-121]
Hydraulic jump
Forced Hydraulic Jump by One and Two Continuous Sills in a Horizontal Stilling Basin. [Volume 24, Issue 1, 2005, Pages 97-119]
Hydraulic Mean Radius
investigation of Parameters Affecting Abrasion Resistance of R.C.C. [Volume 24, Issue 1, 2005, Pages 155-176]
Hydrodynamic lubrication
Investigations on Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication [Volume 24, Issue 1, 2005, Pages 283-297]
Hydrogen Sulfide Removal
The Performance of Compost Biofilter for Hydrogen Sulfide Removal from Contaminated Air [Volume 20, Issue 1, 2001, Pages 43-53]
Hydrogeology
Fundamentals of the Capture Zone Calculations to Qualitatively Protect Cities Drinking Water Wells [Volume 23, Issue 2, 2004, Pages 77-91]
Hydrophilic surface
Numerical Simulation of Turbulent Half-corrugated Channel Flow by Hydrophilic and Hydrophobic Surfaces [Volume 36, Issue 2, 2017, Pages 1-20]
Hydrophobic surface
Numerical Simulation of Turbulent Half-corrugated Channel Flow by Hydrophilic and Hydrophobic Surfaces [Volume 36, Issue 2, 2017, Pages 1-20]
Hydroxyapatite Coating
The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
Hypersonic
Development of an Upwind Algorithm at Subsonic Regions in the Solution of PNS Equations [Volume 22, Issue 1, 2003, Pages 155-165]
Hysteresis damper
Analytical Investigation of TADAS Damper Applied in Seismic Rehabilitation & Design of Concrete Structures [Volume 25, Issue 2, 2006, Pages 51-64]
Hysteretic metallic damper
Study of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads [Volume 25, Issue 1, 2006, Pages 101-119]
I
ICF
Energy Gain of Magnetized Cylindrical D-T Targets in Fast Ignition Fusion [Volume 27, Issue 1, 2008, Pages 65-83]
Image matching
Application of Radon Transform in Detecting Turning Angle of Bodies and in Reading Multi - Lingual Documents [Volume 22, Issue 1, 2003, Pages 31-45]
Impedance calculation
A Novel Method for Impedance Calculation of Distance Relays Using Third Order Interpolation [Volume 27, Issue 2, 2008, Pages 1-17]
Imperfection
Theoretical and Experimental Collapse Analysis of Ring Stiffened Shells Using Finite Element Software Packages and Application of Results to a Submarine Pressure Hull [Volume 25, Issue 1, 2006, Pages 227-236]
Implicit Enumeration
Solving Bus Terminal Location Problem Using Simulated Annealing Method [Volume 20, Issue 2, 2001, Pages 125-140]
Improved Applied Element Method (IAEM)
Material and Geometrical Nonlinear Analysis of Structures Using Improved Applied Element Method (IAEM) [Volume 35, Issue 1, 2016, Pages 65-81]
Inclined cavity
The Effect of Magnetic Field and Nanoparticle Shape on Heat Transfer in an Inclined Cavity with Uniform Heat Generation/Absorption [Volume 40, Issue 2, 2021, Pages 109-126]
Inclined slices
Study of Reinforced Slopes Safety Factor Using the Inclined Slices Method [Volume 27, Issue 2, 2008, Pages 139-148]
Inclusion shape control
Inclusion Shape Control and its Effects on the Impact Property of the API X42 Steel [Volume 21, Issue 2, 2002, Pages 133-144]
Incompressibility
Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
Incompressible model
A Simplified Curved Boundary Condition in Stationary/Moving Boundaries for the Lattice Boltzmann Method [Volume 39, Issue 1, 2020, Pages 87-104]
Inconel718
Thermomechanical and microstructural simulation of rotary friction welding process of Inconel718 alloy using the finite element method [Volume 42, Issue 2, 2023, Pages 129-147]
Inducation servo-drive
Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory [Volume 22, Issue 2, 2003, Pages 21-34]
Induction motor
Evaluation of LPF and PCLPF and Development of a Novel Method to Solve DC Offset Problem in Vector Control of Induction Motors [Volume 24, Issue 2, 2005, Pages 1-14]
Induction Motor Speed Control
A New Multi-Objective Optimization Method Based on Genetic- Fuzzy Algorithm and its Application in Induction Motor Speed Control [Volume 20, Issue 1, 2001, Pages 29-42]
Industrial combustion chamber
3-D Numerical Simulation of Gas Turbine Combustor [Volume 22, Issue 2, 2003, Pages 137-148]
Inflow turbulence generation methods
Analysis of Various Inflow Turbulence Generation Methods in Large Eddy Simulation Approach for Prediction of Pollutant Dispersion around Model Buildings [Volume 35, Issue 2, 2016, Pages 85-112]
Initial geometrical imperfection
Nonlinear Buckling Analysis of Nano-composite Beam with Initial Geometrical Imperfection using Finite Element Method [Volume 36, Issue 2, 2017, Pages 79-98]
Inplane loads
Stability Criteria for Rectangular Plates Subjected to Intermediate and End Inplane Loads Using Spline Finite Strip Method [Volume 26, Issue 1, 2007, Pages 65-78]
Input constraint
Design of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System [Volume 39, Issue 2, 2020, Pages 23-44]
Input-Output Linearzation
Tracking Control of Uncertain Non - Iinear MIMO System Using Modified Sliding Surfaces for Attitude Large Maneuver of Satellites on Orbit [Volume 22, Issue 1, 2003, Pages 203-209]
In-situ
Pilot in-Situ Production of AL-TiB2 and AL-ZrB2 Composites Using Reactive Slag [Volume 23, Issue 1, 2004, Pages 179-188]
Instability of slopes
Investigation of Inclined Retaining Walls (Located on Slopes) Performance against Static and Earthquake Loads [Volume 26, Issue 2, 2007, Pages 17-31]
Intake and Sedimentation
Calculation of Optimum Dimensions and Array of Submerged Vanes at Intakes Using the Feasible Direction Method [Volume 20, Issue 2, 2001, Pages 207-215]
Intermediate band
Optimization of Thermalisation Loss in the Quantum Dot Solar Cells using a Finite Element Method [Volume 38, Issue 2, 2019, Pages 83-95]
Intermediate flexible connections
Vibration of Elastically Connected Multiple Timoshenko Beams under a Moving Six Degrees of Freedom System [Volume 35, Issue 2, 2016, Pages 23-45]
Internal Heat Generation
Heat Transfer Enhancement of Al2O3âH2O Nanofluid Free Convection in Two-Phase Flow with Internal Heat Generation Using Two Dimensional Lattice Boltzmann Method [Volume 40, Issue 2, 2021, Pages 1-18]
Interpolation
The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
Interpolation cover functions
Automatic Adaptive Finite Element Enrichement using Interpolation Cover Functions [Volume 37, Issue 2, 2018, Pages 79-96]
Interpolation technique
A Novel Method for Impedance Calculation of Distance Relays Using Third Order Interpolation [Volume 27, Issue 2, 2008, Pages 1-17]
Inventory control
(Q,r) Stochastic Demand Inventory Model With Exact Number of Cycles [Volume 21, Issue 1, 2002, Pages 71-80]
Inventory control
Coordinating Orders in Three-echelon Supply Chain using price adjustment mechanism [Volume 27, Issue 2, 2008, Pages 67-80]
Inventory cycle
(Q,r) Stochastic Demand Inventory Model With Exact Number of Cycles [Volume 21, Issue 1, 2002, Pages 71-80]
Inverse design
Inverse Design of Airfoil using Elastic Surface Method in Viscous Subsonic and Transonic Flow [Volume 34, Issue 1, 2016, Pages 63-77]
Inverter
Introduction and Analysis of a Novel Quasi - Series Resonant DC Link [Volume 22, Issue 1, 2003, Pages 17-29]
IP controller
Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory [Volume 22, Issue 2, 2003, Pages 21-34]
Iran
The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
Isogeometric Analysis Method (IGA)
Comparison between Isogeometric Analysis and Extended Finite Element Methods in Discontinuities Modeling and Stress Intensity Factor Calculation [Volume 35, Issue 1, 2016, Pages 83-109]
Isothermal hot deformation
Microstructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation [Volume 23, Issue 1, 2004, Pages 189-201]
Johnson-Avrami model
Thermomechanical and microstructural simulation of rotary friction welding process of Inconel718 alloy using the finite element method [Volume 42, Issue 2, 2023, Pages 129-147]
Joint and Short rail
Square Joints in Railway Track Waves [Volume 24, Issue 1, 2005, Pages 197-211]
K
Kalman filter
Robust Tracking Control of Satellite Attitude Using New EKF for Large Rotational Maneuvers [Volume 25, Issue 1, 2006, Pages 1-15]
Karkheh
Flood Hydrograph Simulation with Uncertainty in Rainfall - Runoff Parameters [Volume 23, Issue 2, 2004, Pages 93-111]
K-distributed
Radar Signal Detection in K-distributed Clutter by Pade Approximation [Volume 26, Issue 2, 2007, Pages 53-65]
K-Epsilon model
Hydrodynamic simulation of stirred gas-liquid bioreactor for the optimization of the rotation speed of Rushton impellers using CFD [Volume 42, Issue 2, 2023, Pages 109-128]
Kinematic hardening
A Constitutive Model for Sands [Volume 27, Issue 1, 2008, Pages 51-63]
Kinematic Interaction
Shake Table Study of Soil-Structure Interaction Effects on Seismic Response of Adjacent Buildings [Volume 22, Issue 2, 2003, Pages 51-71]
Kinematics of parallel robots
Forward Kinematics Solution of Stewart-Gough using Improved Hybrid Strategy (Neural Network and 3rd-order Newton-Raphson) [Volume 35, Issue 2, 2016, Pages 113-129]
Kinetic Theory of Granular Flow
Evaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds [Volume 41, Issue 1, 2022, Pages 155-174]
Knee-barced frame
Nonlinear Analysis of Knee-braced Frames under Earthquake Loadings [Volume 22, Issue 2, 2003, Pages 103-116]
Knowledge
Measunig the Level of an Engineering Organizationâs knowledge: A New Method [Volume 21, Issue 2, 2002, Pages 45-60]
Knowledge dimensions
Measunig the Level of an Engineering Organizationâs knowledge: A New Method [Volume 21, Issue 2, 2002, Pages 45-60]
Knowledge hierarchy
Measunig the Level of an Engineering Organizationâs knowledge: A New Method [Volume 21, Issue 2, 2002, Pages 45-60]
Knowledge management
Measunig the Level of an Engineering Organizationâs knowledge: A New Method [Volume 21, Issue 2, 2002, Pages 45-60]
Knowledge measurement
Measunig the Level of an Engineering Organizationâs knowledge: A New Method [Volume 21, Issue 2, 2002, Pages 45-60]
Knudsen number
Application and Comparison of Different Lattice Boltzmann Methods
on Non-Uniform Meshes for Simulation of Micro Cavity and
Micro Channel Flow [Volume 34, Issue 1, 2016, Pages 97-118]
Kohonen neural network
Application of Pattern Recognition Algorithms for Clustering Power System to Voltage Control Areas and Comparison of Their Results [Volume 20, Issue 2, 2001, Pages 27-42]
Kubelka-Munk Theory
A Comparison between Kubelka-Munk and Geometric Models for Prediction of Reflectance Factor of Transparent Fibers [Volume 26, Issue 2, 2007, Pages 31-45]
L
Labeling
A Modified Character Segmentation Algorithm for Farsi Printed Text Using Upper Contour Labelling [Volume 23, Issue 1, 2004, Pages 33-48]
Laboratory
Fundamentals Design and Set up Radial Inflow Gas Turbine Research Lab [Volume 21, Issue 2, 2002, Pages 61-71]
Lacation problem
Solving Bus Terminal Location Problem Using Simulated Annealing Method [Volume 20, Issue 2, 2001, Pages 125-140]
Ladle furnace and inclusion modification
Inclusion Shape Control and its Effects on the Impact Property of the API X42 Steel [Volume 21, Issue 2, 2002, Pages 133-144]
Lagrange functions
Vibration and Stability of Axially Moving Plates by Standard and Spectral Finite Element Methods [Volume 26, Issue 1, 2007, Pages 1-12]
Lagrange methode
Analysis of Thin Isotropic and Orthotropic Plates with Element-Free Galerkin Method and Various Geometric Shapes [Volume 34, Issue 2, 2016, Pages 143-157]
Lagrangian relaxatio
Designing a Closed Loop Supply Chain Network Considering the Supplier Disorder Risk and Production Time [Volume 37, Issue 2, 2018, Pages 61-78]
Laminar Flow
Laminar Flow Analysis in the Channel Bends [Volume 23, Issue 2, 2004, Pages 151-171]
Laminar flow about a Cylinder
The Study of Kinematics and Dynamics of Oscillating Laminar Flow About a Cylinder [Volume 20, Issue 1, 2001, Pages 151-171]
Laminated Composite Plates
Buckling of Thick Laminated Composite Plates Based on Zigzag and Third order Shear Deformation Theories using the Finite Strip Method [Volume 37, Issue 1, 2018, Pages 83-105]
Landfill
Evaluation of Optimum Landfill Design by Contaminant Transport Analysis [Volume 24, Issue 1, 2005, Pages 135-153]
Large deformation
A Corotational Elastic Constitiutive Model and its Application to the Analysis of a Large Deformation Closed Cycle [Volume 23, Issue 1, 2004, Pages 147-161]
Large eddy simulation
Mixed Large-Eddy Simulation Model for Turbulent Flows across Tube Bundles Using Parallel Coupled Multiblock NS Solver [Volume 25, Issue 2, 2006, Pages 131-149]
Large eddy simulation approach
Analysis of Various Inflow Turbulence Generation Methods in Large Eddy Simulation Approach for Prediction of Pollutant Dispersion around Model Buildings [Volume 35, Issue 2, 2016, Pages 85-112]
Large-Scale
Analysis of Large-Scale Heat Conduction Problems Using a Modified Single-Level Fast Multipole Method [Volume 41, Issue 2, 2022, Pages 83-100]
Lattice Boltzmann method
A Simplified Curved Boundary Condition in Stationary/Moving Boundaries for the Lattice Boltzmann Method [Volume 39, Issue 1, 2020, Pages 87-104]
Lattice Boltzmann method
Simulation of Deformation and Break-up of Droplets in the Presense of Electric Field in Porous Media Using Lattice Boltzmann Method [Volume 40, Issue 1, 2021, Pages 79-101]
Latticed column
A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results [Volume 22, Issue 1, 2003, Pages 57-73]
Lattice-Discrete Particle Model (LDPM)
Extending Lattice Discrete Particle Model of Concrete for Non-circular Aggregates [Volume 35, Issue 1, 2016, Pages 11-25]
Leading edge vortex
An Experimental Investigation of the Flowfield over a Low Aspect Ratio Wing [Volume 20, Issue 2, 2001, Pages 181-190]
Length change
An Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete [Volume 25, Issue 2, 2006, Pages 31-49]
Life chute
Modeling the Vertical Falling Life Chute [Volume 27, Issue 2, 2008, Pages 149-154]
Lift force
Estimation of Lift Force on a Rough Vertical Pile of Platform to Random Sea Waves [Volume 23, Issue 1, 2004, Pages 83-94]
Light steel framing
Numerical Modeling and Seismic Performance of Strap Braced Shear Walls Sheathed by Gypsum Board [Volume 37, Issue 2, 2018, Pages 113-138]
Limestone powder
Effect of Limestone Powder on Compressive Strength of Concrete Containing Silica Fume and Optimization of Mix Design Using Response Surface Method [Volume 24, Issue 1, 2005, Pages 401-411]
Limit equilibrium
Study of Reinforced Slopes Safety Factor Using the Inclined Slices Method [Volume 27, Issue 2, 2008, Pages 139-148]
Linear and nonlinear dynamic absorber
On the Performance of Linear and Nonlinear Dynamic Absorbers for Beams Subjected to Moving Loads [Volume 36, Issue 1, 2017, Pages 99-113]
Linear chance constrained model
Optimization of Water Distribution in the kalamarz Multi - Reservoir System, Mianeh Basin [Volume 21, Issue 2, 2002, Pages 197-209]
Linear elastic analysis
Modified Fixed Grid Finite Element Method in the Analysis of 2D Linear Elastic Problems [Volume 27, Issue 2, 2008, Pages 103-122]
Linear elastic fracture mechanics
Evaluating Weld Magnification Factor in Welded Tubular Joints Using Artifitial Neural Networks [Volume 26, Issue 2, 2007, Pages 15-29]
Linear Programming
Estimation of Open-End Cotton Yarn Strenght from Fiber Physical Characteristics [Volume 23, Issue 1, 2004, Pages 203-209]
Linear Programming
Truss Topology Optimization via Zero-One (Binary) Programming [Volume 42, Issue 2, 2023, Pages 51-67]
Line of Sight Rate
Design of an Optimal Cooperative Guidance Law Confronting Evaders with High Maneuver [Volume 42, Issue 1, 2023, Pages 1-18]
Liquefaction
Finite Difference Dynamic Stability and Liquefaction Analysis of Esphordi Mine Tailings Dam Implementing Non-Linear Elasto-Plastic Constitutive Model [Volume 40, Issue 2, 2021, Pages 57-79]
Lithium-ion batteries
The Effect of Phase Separation on Diffusion Induced Stresses in Spherical and Cylindrical Electrode Particles [Volume 37, Issue 1, 2018, Pages 29-50]
Lithium ion battery
Estimation of the Stress Intensity Factors for Surface Cracks in Spherical Electrode Particles Subject to Phase Separation [Volume 39, Issue 2, 2020, Pages 97-117]
Lithium niobate
Investigation of Piezoelectric Coupling and Anisotropy Effect on Acoustic Wave Propagation at LithiumNiobate Crystalloacoustic [Volume 36, Issue 1, 2017, Pages 149-159]
Littlewood-Paley Wavelet (LPW) kernel
Structural Damage Detection using Frequency Response Function Index and Surrogate Model Based on Optimized Extreme Learning Machine Algorithm [Volume 36, Issue 1, 2017, Pages 1-17]
Littoral Transport
Development of a Computer Model for the Prediction of Littoral Sediment Transport Rate [Volume 20, Issue 2, 2001, Pages 77-91]
Live load
Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2003, Pages 73-81]
Load- moment interaction
A Theoretical Study of the Behavior of Reinforced Concrete Columns Strengthened by Steel Plates and Transverse Reinforcements [Volume 25, Issue 2, 2006, Pages 65-72]
Local baseline
A Modified Character Segmentation Algorithm for Farsi Printed Text Using Upper Contour Labelling [Volume 23, Issue 1, 2004, Pages 33-48]
Local Buckling
Determination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis [Volume 21, Issue 1, 2002, Pages 153-166]
Local Buckling
Stability Criteria for Rectangular Plates Subjected to Intermediate and End Inplane Loads Using Spline Finite Strip Method [Volume 26, Issue 1, 2007, Pages 65-78]
Local energy loss
Theoretical-experimental Determination of Nonlinear Crack Parameters in the Cracked Beam under Nonlinear Low Amplitude Vibration [Volume 36, Issue 1, 2017, Pages 85-98]
Local search
Reliability-Based Design Optimization of Structures using Modified Weighted Simulation Method [Volume 35, Issue 2, 2016, Pages 1-22]
Lock-in Phenomenon
Estimation of Lift Force on a Rough Vertical Pile of Platform to Random Sea Waves [Volume 23, Issue 1, 2004, Pages 83-94]
Long axisymmetric body
Experimental Investigations of Supersonic Flow around a Long Axisymmetric Body [Volume 24, Issue 2, 2005, Pages 171-191]
Losses
Introduction and Analysis of a Novel Quasi - Series Resonant DC Link [Volume 22, Issue 1, 2003, Pages 17-29]
Lost-sales
A New Inventory Model for Deteriorating Items with Price-dependent Demand, Time-value of money, and Shortages [Volume 27, Issue 2, 2008, Pages 19-29]
Low amplitude vibration
Theoretical-experimental Determination of Nonlinear Crack Parameters in the Cracked Beam under Nonlinear Low Amplitude Vibration [Volume 36, Issue 1, 2017, Pages 85-98]
Lower Bound
A New Lower Bound for Completion Time Distribution Function of Stochastic PERT Networks [Volume 23, Issue 1, 2004, Pages 49-69]
Low-Rise R. C. Buildings
Siesmic Assessment og Ductility and Strength Capacities of Low-Rise R. C. Buildings [Volume 20, Issue 2, 2001, Pages 55-75]
Lyapunov– based controller
Robust Nonlinear Control of Missile Longitudinal Dynamics in Presence of Unmatched Uncertainty [Volume 35, Issue 1, 2016, Pages 1-9]
Machine Drive
Practical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC [Volume 22, Issue 1, 2003, Pages 1-16]
Machining
Introducing A New Mathematical Model and Developing A Computer Package For 3-D Machining of Fiber Reinforced Polymer Composites [Volume 21, Issue 2, 2002, Pages 111-123]
Maleic Anhydride
Grafting of Maleic Anhydride onto Co)propylene-b-ethylene( by Extrusion Process: Measurement of Adhesion to Steel Surface [Volume 26, Issue 1, 2007, Pages 313-322]
Manaxial
Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers [Volume 23, Issue 2, 2004, Pages 113-131]
Maneuverability
Minimum-Time Roll Around the Velocity-Vector Maneuver of Aircraft [Volume 20, Issue 1, 2001, Pages 173-187]
Manganese
Processing of Low Grade Fine Manganese Ore Using Flotation Method [Volume 21, Issue 2, 2002, Pages 159-166]
MAP estimation
Speaker Adaptation in Continuous Speech Recognition Using MLLR-Based MAP Estimation [Volume 23, Issue 2, 2004, Pages 39-50]
Martensite
Drawing CCCT Diagrams and Investigation of Deformation Effects on Martensite and Bainite Trabsformations in NiCrMoV Steel [Volume 25, Issue 1, 2006, Pages 149-165]
Masonry wall
Analytical Assessment of the Behaviour of the Masonry Wall Strengthed by Steel Mesh and Shotcrete [Volume 25, Issue 2, 2006, Pages 213-221]
Mass isolation
Mass Participation Factor in Defining Non-classical Range of Behavior for Mass Isolated Systems [Volume 24, Issue 2, 2005, Pages 29-49]
Mass participation factor
Mass Participation Factor in Defining Non-classical Range of Behavior for Mass Isolated Systems [Volume 24, Issue 2, 2005, Pages 29-49]
Mat foundations
Geotechnical Interaction of Piled Raft Foundations: Two Case Studies [Volume 26, Issue 1, 2007, Pages 93-108]
Maturity
Estimation of Open-End Cotton Yarn Strenght from Fiber Physical Characteristics [Volume 23, Issue 1, 2004, Pages 203-209]
Mechanical alloying (MA)
Study of Structural Changes in Cu-Ni-Zn Mixture in Producing of Nickel Silver Alloys by Mechanical Alloying [Volume 26, Issue 1, 2007, Pages 301-311]
Mechanical anisotropy
The Effect of Mechanical Anisotropy and Heterogeneity of Shear Strength Parameters of Soils on Drained Bearing Capacity of Shallow Foundations [Volume 36, Issue 1, 2017, Pages 137-147]
Mechanical behavior
Investigation of the Behavior of Rubberized Concrete under Uniaxial Compressive Test [Volume 26, Issue 2, 2007, Pages 49-58]
Mechanical Characteristics
Experimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC) [Volume 20, Issue 1, 2001, Pages 83-95]
Mechanically polished
Effect of Current Density and Surface Preparation of Steel on Morphology and Texture of Zinc Electrodeposits [Volume 23, Issue 2, 2004, Pages 173-184]
Medical flow imaging
Estimation of PC-MRI Pressure Map Using Integral Form of Governing Equations and Spline Segments [Volume 27, Issue 1, 2008, Pages 117-133]
Memetic algorithm
Minimizing Total Weighted Tardiness in a Flexible Flowshop Environment Considering Batch Processing Machines [Volume 39, Issue 1, 2020, Pages 105-133]
Mesh generation
Automatic Adaptive Finite Element Enrichement using Interpolation Cover Functions [Volume 37, Issue 2, 2018, Pages 79-96]
Mesh interconnection networks
Performance Analysis of a New Neural Network for Routing in Mesh Interconnection Networks [Volume 20, Issue 2, 2001, Pages 17-25]
Meshless Local Petrov-Galerkin (MLPG) Method
Buckling Analysis of Non-Prismatic Columns Subjected to Non-Uniform Loading Using the Meshless Local Petrov-Galerkin Method [Volume 40, Issue 2, 2021, Pages 39-56]
Meshless Local Petrov-Galerkin (MLPG) Method
Stochastic Dynamic Analysis of Multilayer Saturated Porous Cylindrical Structures Using the Meshless Local Petrov-Galerkin Method [Volume 42, Issue 2, 2023, Pages 87-108]
Meshless method
Simulation of Harmonic Waves Generated by the Piston-type Wave-maker in the Wave Flume via the Exponential Basis Functions Mesh-free Method and MEL Formulation [Volume 37, Issue 1, 2018, Pages 1-9]
Mesh refinement
Automatic Adaptive Finite Element Enrichement using Interpolation Cover Functions [Volume 37, Issue 2, 2018, Pages 79-96]
METAFONT
Automatic Design of Persian Typefaces [Volume 20, Issue 1, 2001, Pages 113-126]
Meta-heuristic
Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]
Meta-heuristic algorithms
Ant Colony Algorithm for the Single Loop Routing Problem [Volume 23, Issue 1, 2004, Pages 71-81]
Meta-heuristic algorithms
A Meta-heuristic Algorithm for Global Numerical Optimization Problems inspired by Vortex in fluid physics [Volume 41, Issue 1, 2022, Pages 101-119]
Metaheuristic Algorithms
Optimized Design of Finite Isotropic Plates with Hexagonal Cutout by Metaheuristic Algorithms [Volume 37, Issue 1, 2018, Pages 107-132]
Metaheuristics
Modeling and Scheduling Two-stage Assembly Flow Shop Problems with Non-Identical Assembly Machines [Volume 37, Issue 1, 2018, Pages 65-81]
Metalization
Metalization of Polymers: Copper on Cyclotene [Volume 22, Issue 1, 2003, Pages 167-174]
Metal Matrix Composite
Production of A356/SiCp Composite using EPS/SiCp/CMC Mortar [Volume 27, Issue 2, 2008, Pages 183-198]
Method
Seepage Analysis through Rockfill Dams by Finite Element Method in a Fixed Gird [Volume 22, Issue 1, 2003, Pages 91-108]
Method of characteristics
Effects of Valve Closing Law and Unsteady Friction Model on Damping Pressure Waves in a Network [Volume 26, Issue 1, 2007, Pages 329-338]
Microbeam vibration
On the Effect of Thermoelastic Damping in Nonlinear Micro Electro Mechanical Resonators using Differential Quadrature Method [Volume 34, Issue 1, 2016, Pages 1-10]
Micro channel
Determination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids [Volume 22, Issue 1, 2003, Pages 129-142]
Micromechanical Analysis
Development of Circular Disk Model for Polymeric Nanocomposites and Micromechanical Analysis of Residual Stresses in Reinforced Fibers with Carbon Nanotubes [Volume 35, Issue 2, 2016, Pages 177-196]
Microsegregation
The Microsegregation Pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Irons [Volume 22, Issue 2, 2003, Pages 177-188]
Microstructural simulation
Thermomechanical and microstructural simulation of rotary friction welding process of Inconel718 alloy using the finite element method [Volume 42, Issue 2, 2023, Pages 129-147]
Microzonation
Seismic Behavior of 2D Semi-Sine Shaped Hills against Vertically Propagating Incident Waves [Volume 26, Issue 1, 2007, Pages 109-130]
Mixed Eulerian-Lagrangian
Simulation of Harmonic Waves Generated by the Piston-type Wave-maker in the Wave Flume via the Exponential Basis Functions Mesh-free Method and MEL Formulation [Volume 37, Issue 1, 2018, Pages 1-9]
Mixed-model assembly lines
Minimizing Stoppage Cost of an Assembly Line Using Genetic Algorithm [Volume 27, Issue 1, 2008, Pages 35-50]
Mixed strategy
A New Recursive Formulation for the Mixed Redundancy Strategy in Reliability Optimization Problems [Volume 39, Issue 2, 2020, Pages 45-58]
Mixing
Intermix Modeling of Grade Change Operations in Steel Slab Continuous Casting Process [Volume 27, Issue 2, 2008, Pages 165-181]
Mixing
Simulation of Non-Isothermal Flow of Rubber in Banbury Mixer Using Computational Fluid Dynamics [Volume 42, Issue 1, 2023, Pages 43-62]
Mixing layer
Numerical Simulation of Free Surface Flows and Comparison of Symmetry and Real Boundary Conditions at the Free Surface [Volume 22, Issue 2, 2003, Pages 161-176]
MLLR transformation
Speaker Adaptation in Continuous Speech Recognition Using MLLR-Based MAP Estimation [Volume 23, Issue 2, 2004, Pages 39-50]
Mobile robots
Dynamics and Motion Control of Wheeled Robotic Systems [Volume 24, Issue 2, 2005, Pages 193-214]
Modal Analysis
Evaluation of Dynamic Characteristics of Marun Embankment Dam Using Ambient Vibration Test and FEM [Volume 22, Issue 1, 2003, Pages 109-127]
Model
A New Method for Estimation of Creep of Concrete Using Short-TermTests under Higher Temperature [Volume 23, Issue 1, 2004, Pages 95-122]
Model Predictive Control
Dynamic Modeling and Control of a Tethered Space Robot [Volume 35, Issue 1, 2016, Pages 111-121]
Model reference
Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory [Volume 22, Issue 2, 2003, Pages 21-34]
Model test
Hydrodynamic Resistance Reduction in Catamaran Assisted Hydrofoils [Volume 24, Issue 1, 2005, Pages 251-269]
Moderately thick plate
Static Analysis of in-Plane Heterogeneous Laminated Composite Plates Using Equilibrated Basis Functions Based on FSDT [Volume 40, Issue 1, 2021, Pages 59-77]
Mode shape
Stress Analysis of Flight Vehicles under Flight Conditions [Volume 25, Issue 1, 2006, Pages 217-226]
Modified compression field theory
Effects of Transverse and Longitudinal Steel Ratios and Shear Span on the Behavior of RC Beams under Shear Using Modified Compression Field Theory [Volume 27, Issue 2, 2008, Pages 81-101]
Modified coupled stress
The Nonlinear Bending Analysis for Circular Nano Plates Based on Modified Coupled Stress and Three- Dimensional Elasticity Theories [Volume 39, Issue 2, 2020, Pages 59-72]
Modified couple stress theory
Thermal Buckling Analysis of Graphene Nanoplates Based on the Modified Couple Stress Theory using Finite Strip Method and Two-Variable Refined Plate Theory [Volume 38, Issue 2, 2019, Pages 43-61]
Modified couple stress theory
Nonlinear Bending Analysis of Micro/Nano Rectangular and Annular Sector Plates Using a Modified Higher-Order Shear Deformation Theory and the Modified Couple Stress Theory [Volume 40, Issue 1, 2021, Pages 43-58]
Modified Hertz Contact Law
Low Velocity Impact Damage Prediction in Laminated Composite Plates [Volume 38, Issue 1, 2019, Pages 37-62]
Modified Higher-order Shear Deformation Theory (MHSDT)
Nonlinear Bending Analysis of Micro/Nano Rectangular and Annular Sector Plates Using a Modified Higher-Order Shear Deformation Theory and the Modified Couple Stress Theory [Volume 40, Issue 1, 2021, Pages 43-58]
Modified radial integration method
A Review on Techniques of Domain Integrals Computation in Boundary Elements Method [Volume 42, Issue 1, 2023, Pages 77-88]
Modified slab method
Analysis of Rolling Process for Clad Sheet Using the Modified Slab Method [Volume 25, Issue 1, 2006, Pages 121-134]
Modulus of Elasticity
Experimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC) [Volume 20, Issue 1, 2001, Pages 83-95]
Mohr-Coulomb
Evaluating the Soil Bearing Capacity Coefficients by Means of a Finite Element Program Based on Elasto - Plastic Mohr - Coulomb Behavior [Volume 22, Issue 1, 2003, Pages 75-90]
Mohr-Coulomb
Finite Difference Dynamic Stability and Liquefaction Analysis of Esphordi Mine Tailings Dam Implementing Non-Linear Elasto-Plastic Constitutive Model [Volume 40, Issue 2, 2021, Pages 57-79]
Mold
Intermix Modeling of Grade Change Operations in Steel Slab Continuous Casting Process [Volume 27, Issue 2, 2008, Pages 165-181]
Monetary value
A New Heuristic Algorithm for Time-cost Trade-off Problem Taking into Account Monetary Value [Volume 24, Issue 1, 2005, Pages 31-46]
Monte Carlo
Flood Hydrograph Simulation with Uncertainty in Rainfall - Runoff Parameters [Volume 23, Issue 2, 2004, Pages 93-111]
Monte Carlo simulation
Random - weighted Monte Carlo Simulation Method for Structural Reliability Analysis [Volume 37, Issue 2, 2018, Pages 41-60]
Monte Carlo simulation
Probabilistic Evaluation on the Free Vibration of Functionally Graded Material Plates Using 3D Solution and Meta-Model Methods [Volume 39, Issue 1, 2020, Pages 45-66]
Monte-Carlo Simulation
Statistical Analysis of Energy Harvesting From Functionally Graded Cantilever Beam with Piezoelectric Layer [Volume 40, Issue 2, 2021, Pages 95-108]
Mortar
Production of A356/SiCp Composite using EPS/SiCp/CMC Mortar [Volume 27, Issue 2, 2008, Pages 183-198]
Motion control
Dynamics and Motion Control of Wheeled Robotic Systems [Volume 24, Issue 2, 2005, Pages 193-214]
Moving droplet
Effect of Nondimensional Parameters On the Internal Circulation of a Liquid Drop Moving with the Surrounding Gas [Volume 21, Issue 1, 2002, Pages 167-179]
Moving loads
On the Performance of Linear and Nonlinear Dynamic Absorbers for Beams Subjected to Moving Loads [Volume 36, Issue 1, 2017, Pages 99-113]
Moving mass
Dynamic Instability Analysis of Transverse Vibrations of Functionally Graded Rectangular Plates under Moving Masses [Volume 41, Issue 1, 2022, Pages 37-59]
Multiblock grid
Mixed Large-Eddy Simulation Model for Turbulent Flows across Tube Bundles Using Parallel Coupled Multiblock NS Solver [Volume 25, Issue 2, 2006, Pages 131-149]
Multicomputer systems
Performance Analysis of a New Neural Network for Routing in Mesh Interconnection Networks [Volume 20, Issue 2, 2001, Pages 17-25]
Multi-layer
Metalization of Polymers: Copper on Cyclotene [Volume 22, Issue 1, 2003, Pages 167-174]
Multilayer Cylindrical Structures
Stochastic Dynamic Analysis of Multilayer Saturated Porous Cylindrical Structures Using the Meshless Local Petrov-Galerkin Method [Volume 42, Issue 2, 2023, Pages 87-108]
Multilayer perceptrons (MLPs)
A Hybrid Intelligent Classification Model Based on Multilayer Perceptron Neural Networks and Fuzzy Regression for Credit Scoring Problems [Volume 37, Issue 2, 2018, Pages 97-111]
Multi-level voltage source inverter
Space Vector Modulation Based on Classification Method in Three-Phase Multi-Level Voltage Source Inverters [Volume 23, Issue 1, 2004, Pages 15-32]
Multi-mode project selection and scheduling
Multi-mode Resource Constrained Project Selection and Scheduling Considering the Reinvestment Strategy in a Flexible Time Horizon [Volume 40, Issue 1, 2021, Pages 17-42]
Multi-Objective Optimization
A New Multi-Objective Optimization Method Based on Genetic- Fuzzy Algorithm and its Application in Induction Motor Speed Control [Volume 20, Issue 1, 2001, Pages 29-42]
Multiphase Flow
Simulation of Deformation and Break-up of Droplets in the Presense of Electric Field in Porous Media Using Lattice Boltzmann Method [Volume 40, Issue 1, 2021, Pages 79-101]
Multiphase flows
Smooth Particle Hydrodynamics Scheme for Numerical Simulation of Multiphase Flows With Complex Interface Surfaces [Volume 41, Issue 2, 2022, Pages 137-153]
Multiple scale method
Investigating the Dynamics of a Ball-Spring Autobalancer in a Rotor with Non-Linear Bearings [Volume 39, Issue 1, 2020, Pages 29-43]
Multiple scales method
Theoretical-experimental Determination of Nonlinear Crack Parameters in the Cracked Beam under Nonlinear Low Amplitude Vibration [Volume 36, Issue 1, 2017, Pages 85-98]
Multiple Shooting Method
Minimum-Time Roll Around the Velocity-Vector Maneuver of Aircraft [Volume 20, Issue 1, 2001, Pages 173-187]
Multi-reservoir system
Optimization of Water Distribution in the kalamarz Multi - Reservoir System, Mianeh Basin [Volume 21, Issue 2, 2002, Pages 197-209]
N
Nanobiotechnology
Effects of Substrate Solution pH, Incubation Temperature, and Calcination Temperature on Bacterial Synthesis of Nano-Crystalline Hydroxyapatite [Volume 27, Issue 2, 2008, Pages 213-226]
Nano-composite shell
Nonlinear Bending Analysis of Composite Cylindrical Shells Reinforced by Functionally Graded Carbon Nanotube in Circumferential Direction [Volume 36, Issue 1, 2017, Pages 47-65]
Nanocrystalline
An Investigation of the Use of Ni3Al Intermetallic Compound for Fabrication of Al Matrix Composites [Volume 25, Issue 2, 2006, Pages 183-190]
Nanocrystalline
Formation Mechanism and Enthalpy of Mixing of Nanocrystalline NiTi Intermetallic during Mechanical Alloying [Volume 26, Issue 2, 2007, Pages 59-70]
Nanofluid
Comparative Study of Laminar Convective Heat Transfer and Pressure Drop of Nanofluids through Curved Geometries [Volume 36, Issue 1, 2017, Pages 19-37]
Nanofluid
Analysis of Particle Dispersion in Turbulent Mixed Convection of CuO-water Nanofluid [Volume 36, Issue 2, 2017, Pages 35-47]
Nanofluid
Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
Nanofluid
Numerical Study of the Effect of Nanofluid on Heat Transfer of a Channel in the Presence of Variable Magnetic Field with Obstacles [Volume 40, Issue 2, 2021, Pages 81-94]
Nanofluid
Comparison of Homogenous and Buongiorno’ Model with Eulerian-Lagrangian Model for Nanofluids Heat Transfer in a Microchannel [Volume 41, Issue 2, 2022, Pages 101-116]
Nanofluids
Investigation of the Effect of Geometry and Type of Nanofluids on the Heat Transfer Inside the Microchannel using Computational Fluid Dynamics (CFD) [Volume 38, Issue 1, 2019, Pages 63-79]
Nanoparticle shape
The Effect of Magnetic Field and Nanoparticle Shape on Heat Transfer in an Inclined Cavity with Uniform Heat Generation/Absorption [Volume 40, Issue 2, 2021, Pages 109-126]
Natural
Effects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities [Volume 21, Issue 1, 2002, Pages 181-194]
Natural convection
Numerical and Analytical Study of Natural Dry Cooling Tower in a Steam Power Plant [Volume 26, Issue 1, 2007, Pages 183-195]
Natural convection
The Effect of Magnetic Field and Nanoparticle Shape on Heat Transfer in an Inclined Cavity with Uniform Heat Generation/Absorption [Volume 40, Issue 2, 2021, Pages 109-126]
Navier stokes
Development of an Upwind Algorithm at Subsonic Regions in the Solution of PNS Equations [Volume 22, Issue 1, 2003, Pages 155-165]
Navier-Stokes equation
Analysis of the Effect of Fluid Velocity on the Instability of Concrete Pipes Reinforced with Nanoparticles Conveying the Fluid Flow [Volume 38, Issue 2, 2019, Pages 63-81]
Net present value
A Heuristic Algorithm for Project Scheduling Problem to Maximizing the Net Present Value [Volume 25, Issue 2, 2006, Pages 11-30]
Net present value
Net Present Value of Cash Flows in Single Machine and Flow Shop Scheduling Problems [Volume 27, Issue 2, 2008, Pages 49-65]
Network
A New Lower Bound for Completion Time Distribution Function of Stochastic PERT Networks [Volume 23, Issue 1, 2004, Pages 49-69]
Network planning
A New Generation Allocation and Expansion Planning Algorithm Including Transmission System Effects [Volume 24, Issue 1, 2005, Pages 1-15]
Neutral Stability
Stability Analysis for Wake Flow Behind a Flat Plate [Volume 24, Issue 1, 2005, Pages 271-282]
New power definitions
The New Definitions for the Power Terms in Distorted and Unbalanced Conditions and Calculation of these Terms for an Electric Arc Furnace [Volume 23, Issue 2, 2004, Pages 207-215]
Newtonian lubricant
Investigations on Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication [Volume 24, Issue 1, 2005, Pages 283-297]
Newton-Raphson linearization
Developing a Shock-Capturing Formulation with Higher Performance to Capture Normal Standing Shock in All-Speed Regime [Volume 25, Issue 2, 2006, Pages 167-181]
Newton Rophson method
Forward Kinematics Solution of Stewart-Gough using Improved Hybrid Strategy (Neural Network and 3rd-order Newton-Raphson) [Volume 35, Issue 2, 2016, Pages 113-129]
Next generation networks
Forecasting Capital Investment for Fixed-Telephony Network Switching Equipment in Tandem with NGN Migration Using Cobb-Douglas Model [Volume 27, Issue 1, 2008, Pages 1-16]
Neyman – Peatson criterion
Optimum Local Decision Rules in a Distributed Detection System with Dependent Observations [Volume 25, Issue 2, 2006, Pages 1-10]
Nickel-silver
Study of Structural Changes in Cu-Ni-Zn Mixture in Producing of Nickel Silver Alloys by Mechanical Alloying [Volume 26, Issue 1, 2007, Pages 301-311]
NiTi intermetallic
Formation Mechanism and Enthalpy of Mixing of Nanocrystalline NiTi Intermetallic during Mechanical Alloying [Volume 26, Issue 2, 2007, Pages 59-70]
Nodal elevations
Optimal Design of Sewer Network Size using Ant Colony Optimization Algorithm: Comparing Performance of Four Different Algorithms [Volume 36, Issue 1, 2017, Pages 115-136]
Nodular Graphite Cast Iron
The Microsegregation Pattern of Aluminum and Silicon in the Matrix Microstructure of the Nodular Cast Irons [Volume 22, Issue 2, 2003, Pages 177-188]
Non-boundary-fitted meshes
Modified Fixed Grid Finite Element Method in the Analysis of 2D Linear Elastic Problems [Volume 27, Issue 2, 2008, Pages 103-122]
Non-classical system
Mass Participation Factor in Defining Non-classical Range of Behavior for Mass Isolated Systems [Volume 24, Issue 2, 2005, Pages 29-49]
Nonconforming finite element method
A Hybridized Crouziex-Raviart Nonconforming Finite Element and Discontinuous Galerkin Method for a Two-Phase Flow in the Porous Media [Volume 38, Issue 2, 2019, Pages 1-22]
Non-Darcy flow
Seepage Analysis through Rockfill Dams by Finite Element Method in a Fixed Gird [Volume 22, Issue 1, 2003, Pages 91-108]
Non-Darcy flow
Dynamic Analysis of Porous Media using Generalized Plasticity Model and Non-Darcy Flow Rule [Volume 38, Issue 1, 2019, Pages 101-118]
Non-Gaussian
Radar Signal Detection in K-distributed Clutter by Pade Approximation [Volume 26, Issue 2, 2007, Pages 53-65]
Non-gray gas
Temperature Distribution of a Non gray Gas between Two Parallel Planes Using Exponential Wide Band Model [Volume 24, Issue 1, 2005, Pages 299-314]
Non holonomic constraints
Dynamics and Motion Control of Wheeled Robotic Systems [Volume 24, Issue 2, 2005, Pages 193-214]
Nonhomogeneous
Transient Site Response Analysis of Nonhomogeneous Two-dimensional Topographic Features Using BEM [Volume 24, Issue 2, 2005, Pages 51-68]
Non-hydrostatic pressure
Numerical Simulation of Free Surface Flows and Comparison of Symmetry and Real Boundary Conditions at the Free Surface [Volume 22, Issue 2, 2003, Pages 161-176]
Nonlinear analysis
Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
Non-Linear analysis
An Innovative Method for The Analysis of Structures with Tension-only Members [Volume 20, Issue 1, 2001, Pages 69-81]
Non-Linear analysis
Material and Geometrical Nonlinear Analysis of Structures Using Improved Applied Element Method (IAEM) [Volume 35, Issue 1, 2016, Pages 65-81]
Nonlinear bearings
Investigating the Dynamics of a Ball-Spring Autobalancer in a Rotor with Non-Linear Bearings [Volume 39, Issue 1, 2020, Pages 29-43]
Nonlinear bending
Nonlinear Bending Analysis of Composite Cylindrical Shells Reinforced by Functionally Graded Carbon Nanotube in Circumferential Direction [Volume 36, Issue 1, 2017, Pages 47-65]
Nonlinear bending
The Nonlinear Bending Analysis for Circular Nano Plates Based on Modified Coupled Stress and Three- Dimensional Elasticity Theories [Volume 39, Issue 2, 2020, Pages 59-72]
Nonlinear bending
Nonlinear Bending Analysis of Micro/Nano Rectangular and Annular Sector Plates Using a Modified Higher-Order Shear Deformation Theory and the Modified Couple Stress Theory [Volume 40, Issue 1, 2021, Pages 43-58]
Nonlinear buckling analysis
Nonlinear Buckling Analysis of Nano-composite Beam with Initial Geometrical Imperfection using Finite Element Method [Volume 36, Issue 2, 2017, Pages 79-98]
Nonlinear control
Design of a Constrained Nonlinear Controller using Firefly Algorithm for Active Suspension System [Volume 39, Issue 2, 2020, Pages 23-44]
Nonlinear crack
Theoretical-experimental Determination of Nonlinear Crack Parameters in the Cracked Beam under Nonlinear Low Amplitude Vibration [Volume 36, Issue 1, 2017, Pages 85-98]
Non-linear die
Optimalization of Die Shap and Flow Lines in Non-Linear Dies in Extrusion of Non-Circular Sections [Volume 26, Issue 1, 2007, Pages 285-299]
Nonlinear Energy Sink (VI NES.)
Vibration Control of Structures using Vibro-Impact Nonlinear Energy Sinks [Volume 35, Issue 1, 2016, Pages 123-142]
Non-linear finite element
Analysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method [Volume 24, Issue 1, 2005, Pages 391-399]
Nonlinear Finite Element Analysis
Determination of Buckling Limit of Strain in Cold Roll Forming through Finite Element Analysis [Volume 21, Issue 1, 2002, Pages 153-166]
Non-linear flow
Seepage Analysis through Rockfill Dams by Finite Element Method in a Fixed Gird [Volume 22, Issue 1, 2003, Pages 91-108]
Nonlinear modal interactions
Identification of Nonlinear Modal Interactions in a Beam-Mass-Spring-Damper System based on Mono-Frequency Vibration Response [Volume 38, Issue 1, 2019, Pages 19-36]
Nonlinear response
Nonlinear Analysis of Knee-braced Frames under Earthquake Loadings [Volume 22, Issue 2, 2003, Pages 103-116]
Nonlinear response
Non-linear Response and Dynamic Buckling Analysis of a Cylindrical Sandwich Panel with a Flexible Core under Blast Loading [Volume 39, Issue 1, 2020, Pages 67-85]
Non-linear System
Tracking Control of Uncertain Non - Iinear MIMO System Using Modified Sliding Surfaces for Attitude Large Maneuver of Satellites on Orbit [Volume 22, Issue 1, 2003, Pages 203-209]
Nonlinear system identification
Identification of Nonlinear Modal Interactions in a Beam-Mass-Spring-Damper System based on Mono-Frequency Vibration Response [Volume 38, Issue 1, 2019, Pages 19-36]
Nonlinear Systems
Increase of Sliding Mode Controller Stability Limit [Volume 25, Issue 2, 2006, Pages 205-212]
Nonlocal elasticity theory
Nonlinear Buckling Analysis of Nano-composite Beam with Initial Geometrical Imperfection using Finite Element Method [Volume 36, Issue 2, 2017, Pages 79-98]
Nonlocal model
A Review of Peridynamics and its Applications; Part1: The Models based on Peridynamics [Volume 41, Issue 1, 2022, Pages 1-35]
Nonlocal model
A Review of Peridynamics and its Applications;
Part 2: Applications of Peridynamics to the Solution of Different Problems [Volume 41, Issue 2, 2022, Pages 1-28]
Non-Newtonian
Determination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids [Volume 22, Issue 1, 2003, Pages 129-142]
Non-Prismatic Columns
Buckling Analysis of Non-Prismatic Columns Subjected to Non-Uniform Loading Using the Meshless Local Petrov-Galerkin Method [Volume 40, Issue 2, 2021, Pages 39-56]
Novel quasi-series resonant link
Introduction and Analysis of a Novel Quasi - Series Resonant DC Link [Volume 22, Issue 1, 2003, Pages 17-29]
Numerical diffusion
A Modified Flux Vector Splitting Scheme for Flow Analysis in Shock Wave Laminar Boundary Layer Interactions [Volume 20, Issue 2, 2001, Pages 167-180]
Numerical diffusion
A New Implicit Dissipation Term for Solving 3D Euler Equations on Unstructured Grids by GMRES+LU-SGS Scheme [Volume 24, Issue 1, 2005, Pages 233-249]
Numerical dispersion
Seismic Wave-Field Propagation Modelling using the Euler Method [Volume 38, Issue 2, 2019, Pages 115-123]
Numerical Intermittent Instability
Evaluation of the Stability of Time Domain Boundary Element Method in Seismic Analysis of Heterogeneous Environments [Volume 41, Issue 2, 2022, Pages 61-82]
Numerical methods
Numerical Simulation of 2D Sediment Transport Equations via Element Free Galerkin [Volume 36, Issue 2, 2017, Pages 139-154]
Numerical model
A Three- Dimensional Model of the Caspian Sea [Volume 21, Issue 1, 2002, Pages 207-220]
Numerical modeling
Numerical Modeling and Seismic Performance of Strap Braced Shear Walls Sheathed by Gypsum Board [Volume 37, Issue 2, 2018, Pages 113-138]
Numerical Optimization
A Meta-heuristic Algorithm for Global Numerical Optimization Problems inspired by Vortex in fluid physics [Volume 41, Issue 1, 2022, Pages 101-119]
Numerical solution
The Study of Kinematics and Dynamics of Oscillating Laminar Flow About a Cylinder [Volume 20, Issue 1, 2001, Pages 151-171]
Numerical solution
Effect of Nondimensional Parameters On the Internal Circulation of a Liquid Drop Moving with the Surrounding Gas [Volume 21, Issue 1, 2002, Pages 167-179]
Numerical solution
Numerical and Experimental Analysis of the Effect of Flow Discharge Ratio on Flow Separation at 45 Degree Open End Water Intake [Volume 24, Issue 1, 2005, Pages 213-232]
Numerical solution
A Numerical Study of Dynamic Detonability Characteristics of Two-phase Unconfined Fuel-Air Clouds [Volume 24, Issue 2, 2005, Pages 105-122]
Numerical solution
Comparative Study of Laminar Convective Heat Transfer and Pressure Drop of Nanofluids through Curved Geometries [Volume 36, Issue 1, 2017, Pages 19-37]
Numerical updating
Finite Element Model Updating of an Offshore Jacket Platforms using Experimental Modal Analysis [Volume 36, Issue 1, 2017, Pages 67-84]
NURBS
Comparison between Isogeometric Analysis and Extended Finite Element Methods in Discontinuities Modeling and Stress Intensity Factor Calculation [Volume 35, Issue 1, 2016, Pages 83-109]
Nusselt number
Numerical Study of the Effect of Nanofluid on Heat Transfer of a Channel in the Presence of Variable Magnetic Field with Obstacles [Volume 40, Issue 2, 2021, Pages 81-94]
O
Observer
Robust Tracking Control of Satellite Attitude Using New EKF for Large Rotational Maneuvers [Volume 25, Issue 1, 2006, Pages 1-15]
Obstacles
Numerical Study of the Effect of Nanofluid on Heat Transfer of a Channel in the Presence of Variable Magnetic Field with Obstacles [Volume 40, Issue 2, 2021, Pages 81-94]
Offshore jacket platform
Simulation of Simplified Computational Model of Jacket Structure with Timoshenko Cantilever Beam and Experimental Signature [Volume 40, Issue 2, 2021, Pages 19-37]
Offshore jacket platforms
Finite Element Model Updating of an Offshore Jacket Platforms using Experimental Modal Analysis [Volume 36, Issue 1, 2017, Pages 67-84]
Open Access
Reactive Power Pricing in an Open Access Environment Considering Combined Optimum Voltage Profile and Voltage Stability [Volume 21, Issue 1, 2002, Pages 1-14]
Optimal number of cells
Optimizing the Number of Cells in a Cellular Manufacturing System [Volume 35, Issue 2, 2016, Pages 65-84]
Optimal operation
Optimization of Water Distribution in the kalamarz Multi - Reservoir System, Mianeh Basin [Volume 21, Issue 2, 2002, Pages 197-209]
Optimal placement
Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
Optimal Separation of Roles
Design of an Optimal Cooperative Guidance Law Confronting Evaders with High Maneuver [Volume 42, Issue 1, 2023, Pages 1-18]
Optimal size
Optimal Design of Sewer Network Size using Ant Colony Optimization Algorithm: Comparing Performance of Four Different Algorithms [Volume 36, Issue 1, 2017, Pages 115-136]
Optimization method
A New Approach for Solving Heat and Mass Transfer Equations of Viscoelastic Nanofluids using Artificial Optimization Method [Volume 38, Issue 1, 2019, Pages 1-18]
Optimizing models
Optimization of Water Distribution in the kalamarz Multi - Reservoir System, Mianeh Basin [Volume 21, Issue 2, 2002, Pages 197-209]
Optimum Decision making
Optimum Local Decision Rules in a Distributed Detection System with Dependent Observations [Volume 25, Issue 2, 2006, Pages 1-10]
Optimum Design
Evaluation of Optimum Landfill Design by Contaminant Transport Analysis [Volume 24, Issue 1, 2005, Pages 135-153]
Optimum Design
Reliability-Based Design Optimization of Structures using Modified Weighted Simulation Method [Volume 35, Issue 2, 2016, Pages 1-22]
Optimum transverse steel ratio
Effects of Transverse and Longitudinal Steel Ratios and Shear Span on the Behavior of RC Beams under Shear Using Modified Compression Field Theory [Volume 27, Issue 2, 2008, Pages 81-101]
Orientation
The Effect of Current Density on Morphology and Texture of Zinc Electrodeposit on Steel [Volume 20, Issue 1, 2001, Pages 207-217]
Origin-Destination Demand
Methods of Reducing the Number of Effective ODs in Order to Solve Traffic Equilibrium Problem in Real Life Networks [Volume 20, Issue 1, 2001, Pages 97-111]
Orr-Sommerfeld
Stability Analysis for Wake Flow Behind a Flat Plate [Volume 24, Issue 1, 2005, Pages 271-282]
Osseointegration
The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
Overhead transmission lines
Simulation of Single Conductors Galloping Oscillations and Estimation of their Maximum Amplitudes [Volume 22, Issue 1, 2003, Pages 47-55]
P
Pade approximation
Radar Signal Detection in K-distributed Clutter by Pade Approximation [Volume 26, Issue 2, 2007, Pages 53-65]
Parallel programming
Mixed Large-Eddy Simulation Model for Turbulent Flows across Tube Bundles Using Parallel Coupled Multiblock NS Solver [Volume 25, Issue 2, 2006, Pages 131-149]
Parallel Robot
Forward Kinematics Solution of Stewart-Gough using Improved Hybrid Strategy (Neural Network and 3rd-order Newton-Raphson) [Volume 35, Issue 2, 2016, Pages 113-129]
Parallel Timoshenko beams
Vibration of Elastically Connected Multiple Timoshenko Beams under a Moving Six Degrees of Freedom System [Volume 35, Issue 2, 2016, Pages 23-45]
Particle breakage
An Improvement of Vermeer-de Borst Constitutive Model for Numerical Simulation of the Shear Behavior of Rockfills [Volume 36, Issue 2, 2017, Pages 49-62]
Particle separation
Numerical Simulation of Particle Separation in the Fluid Flow in a Microchannel Including Spiral and Acoustic Regions [Volume 39, Issue 2, 2020, Pages 1-21]
Particle swarm optimization algorithm
Robust Optimal Trajectory Design of a Launch Vehicle Using Particle Swarm Optimization [Volume 41, Issue 1, 2022, Pages 175-192]
Pasternak foundation
Free Vibration Analysis of Polymer/Graphene Nanoplatelet/Fiber Truncated Conical Shells Embedded in an Elastic Foundation [Volume 42, Issue 2, 2023, Pages 69-86]
Path planning
Inverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory [Volume 26, Issue 1, 2007, Pages 221-232]
Pattern recognition
Application of Pattern Recognition Algorithms for Clustering Power System to Voltage Control Areas and Comparison of Their Results [Volume 20, Issue 2, 2001, Pages 27-42]
Pavement
Effect of Failure Criteria on Stress and Strain Analysis of Asphalt Pavement in Tropical Areas [Volume 27, Issue 1, 2008, Pages 143-150]
PCLPF
Evaluation of LPF and PCLPF and Development of a Novel Method to Solve DC Offset Problem in Vector Control of Induction Motors [Volume 24, Issue 2, 2005, Pages 1-14]
PC-MRI
Estimation of PC-MRI Pressure Map Using Integral Form of Governing Equations and Spline Segments [Volume 27, Issue 1, 2008, Pages 117-133]
Peak Ground Acceleration (PGA)
Effect of Underground Structure on PGA at Ground Surface Considering Linear and Nonlinear Behaviour for the Soil [Volume 34, Issue 1, 2016, Pages 119-137]
Perceptron neural network
Colorimetric Scanner Calibration for Textiles by Neural-Network [Volume 22, Issue 2, 2003, Pages 215-224]
Performance characteristics
Fundamentals Design and Set up Radial Inflow Gas Turbine Research Lab [Volume 21, Issue 2, 2002, Pages 61-71]
Performance Model
Parallel Genetic Algorithm Using Algorithmic Skeleton [Volume 22, Issue 2, 2003, Pages 1-19]
Peridynamics
A Review of Peridynamics and its Applications; Part1: The Models based on Peridynamics [Volume 41, Issue 1, 2022, Pages 1-35]
Peridynamics
A Review of Peridynamics and its Applications;
Part 2: Applications of Peridynamics to the Solution of Different Problems [Volume 41, Issue 2, 2022, Pages 1-28]
Permanent Magnet
Practical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC [Volume 22, Issue 1, 2003, Pages 1-16]
Pert
A New Lower Bound for Completion Time Distribution Function of Stochastic PERT Networks [Volume 23, Issue 1, 2004, Pages 49-69]
Phase and frequency estimation
Desing And Implementation of Adaptive Active Filters for Exact Estimation And Elimination of AC Network Distortions [Volume 21, Issue 2, 2002, Pages 29-44]
Phase-field model
The Effect of Phase Separation on Diffusion Induced Stresses in Spherical and Cylindrical Electrode Particles [Volume 37, Issue 1, 2018, Pages 29-50]
Phase field modeling
Estimation of the Stress Intensity Factors for Surface Cracks in Spherical Electrode Particles Subject to Phase Separation [Volume 39, Issue 2, 2020, Pages 97-117]
Phase separation
The Effect of Phase Separation on Diffusion Induced Stresses in Spherical and Cylindrical Electrode Particles [Volume 37, Issue 1, 2018, Pages 29-50]
Phase separation
Estimation of the Stress Intensity Factors for Surface Cracks in Spherical Electrode Particles Subject to Phase Separation [Volume 39, Issue 2, 2020, Pages 97-117]
Phenol
Optimization of Reductive Leaching of Tidar Cobalt Ore Using Taguchi Method [Volume 24, Issue 1, 2005, Pages 337-354]
Phononic crystal
Simulation of Elastic Wave Propagation through Steel/Epoxy Phononic Crystal Waveguide by Displacement-Based Finite Difference Method [Volume 36, Issue 1, 2017, Pages 39-46]
Phsphate Solutions
Evaluation of Electrical Breakdown of Anodic Films on Titanium in Phosphate-base Solutions [Volume 22, Issue 2, 2003, Pages 201-213]
Physical and chemical deterioration
Investigation of Some Properties and Durability of Concrete in Urumie Lake [Volume 26, Issue 1, 2007, Pages 131-148]
Physical modeling
Optimalization of Die Shap and Flow Lines in Non-Linear Dies in Extrusion of Non-Circular Sections [Volume 26, Issue 1, 2007, Pages 285-299]
Physical Properties
Estimation of Open-End Cotton Yarn Strenght from Fiber Physical Characteristics [Volume 23, Issue 1, 2004, Pages 203-209]
PID controlley
Dynamic Modeling for Earth â Pointing Satellites to Control the Three â axis Attitude without the Attitude Information of One Axis [Volume 21, Issue 2, 2002, Pages 1-14]
Piezoelectric
Reliability Study of Energy Harvesting from Sea Waves by Piezoelectric Patches Consideraing Random JONSWAP Wave Theory [Volume 36, Issue 2, 2017, Pages 21-34]
Piezoelectric coupling
Investigation of Piezoelectric Coupling and Anisotropy Effect on Acoustic Wave Propagation at LithiumNiobate Crystalloacoustic [Volume 36, Issue 1, 2017, Pages 149-159]
Piezoelectric cylinder
Stress Fields and Electric Potential in Piezoelectric Cylinders [Volume 26, Issue 2, 2007, Pages 1-16]
Pile
Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data [Volume 24, Issue 1, 2005, Pages 77-95]
Piled raft interaction
Geotechnical Interaction of Piled Raft Foundations: Two Case Studies [Volume 26, Issue 1, 2007, Pages 93-108]
Pipe diameters
Optimal Design of Sewer Network Size using Ant Colony Optimization Algorithm: Comparing Performance of Four Different Algorithms [Volume 36, Issue 1, 2017, Pages 115-136]
Piston-type wave maker
Simulation of Harmonic Waves Generated by the Piston-type Wave-maker in the Wave Flume via the Exponential Basis Functions Mesh-free Method and MEL Formulation [Volume 37, Issue 1, 2018, Pages 1-9]
Pitting corrosion
Numerical and Experimental Evaluation of Pitting Corrosion of CUSTOM 450 Stainless Steel Alloy in Chloride Environment [Volume 40, Issue 1, 2021, Pages 103-124]
Pitting corrosion simulation
Numerical and Experimental Evaluation of Pitting Corrosion of CUSTOM 450 Stainless Steel Alloy in Chloride Environment [Volume 40, Issue 1, 2021, Pages 103-124]
Plane strain condition
Analysis of Rolling Process for Clad Sheet Using the Modified Slab Method [Volume 25, Issue 1, 2006, Pages 121-134]
Plane strain conditions
Application of Modified Slab Method in Asymmetrical Plate Rolling [Volume 24, Issue 2, 2005, Pages 137-158]
Plastic analysis
Behavior of Castellated I Beams Encased in Concrete [Volume 24, Issue 1, 2005, Pages 121-134]
Plate forming
Thermo-Elastic-Plastic Analysis of Plate Forming Process by Flame Bending Method [Volume 24, Issue 2, 2005, Pages 159-170]
Plate’s theory
Analysis of Thin Isotropic and Orthotropic Plates with Element-Free Galerkin Method and Various Geometric Shapes [Volume 34, Issue 2, 2016, Pages 143-157]
Platform
Estimation of Lift Force on a Rough Vertical Pile of Platform to Random Sea Waves [Volume 23, Issue 1, 2004, Pages 83-94]
Poiseuille flow
A Numerical Study of Drop Motion in Poiseuille Flow [Volume 25, Issue 2, 2006, Pages 113-129]
Pollutant dispersion
Analysis of Various Inflow Turbulence Generation Methods in Large Eddy Simulation Approach for Prediction of Pollutant Dispersion around Model Buildings [Volume 35, Issue 2, 2016, Pages 85-112]
Polypropylene
Mechanical Properties of Polypropylene Coating Containing Maleic Anhydride on Plain Carbon Steel [Volume 25, Issue 2, 2006, Pages 191-203]
Polypropylene
Grafting of Maleic Anhydride onto Co)propylene-b-ethylene( by Extrusion Process: Measurement of Adhesion to Steel Surface [Volume 26, Issue 1, 2007, Pages 313-322]
Pore water Pressure
Modelling of Stress-Strain Behaviour of Clayey Soils Using Artificial Neural Network [Volume 20, Issue 2, 2001, Pages 107-124]
Porosity
Study of the Mechanism and Causes of Pore Formation in Sr-modified Al-Si Alloys [Volume 25, Issue 1, 2006, Pages 189-206]
Porosity
Production of A356/SiCp Composite using EPS/SiCp/CMC Mortar [Volume 27, Issue 2, 2008, Pages 183-198]
Post buckling
Investigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse [Volume 26, Issue 1, 2007, Pages 149-164]
Power system planning
A New Generation Allocation and Expansion Planning Algorithm Including Transmission System Effects [Volume 24, Issue 1, 2005, Pages 1-15]
Pre-flush fluid
Using Computational Fluid Dynamics for Determining the Optimum Pre-flush Fluid Injection Condition During Matrix Acidizing [Volume 41, Issue 2, 2022, Pages 117-136]
Present Serviceability
An Improved Methodology for Measurement of Uninterrupted â Flow Capacity Affected by Pavement Condition [Volume 26, Issue 1, 2007, Pages 79-91]
Present Value
A New Heuristic Algorithm for Time-cost Trade-off Problem Taking into Account Monetary Value [Volume 24, Issue 1, 2005, Pages 31-46]
Present value of profits
A New Inventory Model for Deteriorating Items with Price-dependent Demand, Time-value of money, and Shortages [Volume 27, Issue 2, 2008, Pages 19-29]
Pressure Dependent Visco-Plastic
Numerical Simulation of Granular Column Collapses with Pressure-Dependent Viscoplastic Model using the Smoothed Particle Hydrodynamic Method [Volume 38, Issue 2, 2019, Pages 23-41]
Pressure distribution
Experimental Investigations of Supersonic Flow around a Long Axisymmetric Body [Volume 24, Issue 2, 2005, Pages 171-191]
Pressure drop
Laminar Flow Analysis in the Channel Bends [Volume 23, Issue 2, 2004, Pages 151-171]
Pressure drop
Comparative Study of Laminar Convective Heat Transfer and Pressure Drop of Nanofluids through Curved Geometries [Volume 36, Issue 1, 2017, Pages 19-37]
Pressure drop
Investigation of the Effect of Geometry and Type of Nanofluids on the Heat Transfer Inside the Microchannel using Computational Fluid Dynamics (CFD) [Volume 38, Issue 1, 2019, Pages 63-79]
Pressure estimation
Estimation of PC-MRI Pressure Map Using Integral Form of Governing Equations and Spline Segments [Volume 27, Issue 1, 2008, Pages 117-133]
Pressure fluctuations
Experimental Results of Pressure Fluctuations in a Water Conduit Section Due to Formation of Unstable Two-Phase Air-Water Flow [Volume 24, Issue 2, 2005, Pages 69-86]
Pressure-Poisson equation
Estimation of PC-MRI Pressure Map Using Integral Form of Governing Equations and Spline Segments [Volume 27, Issue 1, 2008, Pages 117-133]
Preventive maintenance
A Cyclical Integrated Production and Maintenance Systems Planning with Consideration of Identical Maintenance Periods [Volume 36, Issue 2, 2017, Pages 63-78]
Price adjustment mechanism
Coordinating Orders in Three-echelon Supply Chain using price adjustment mechanism [Volume 27, Issue 2, 2008, Pages 67-80]
Process
FE-Based Analysis of Hot Forming Process Using the Flow Stress Prediction Model [Volume 22, Issue 1, 2003, Pages 143-153]
Progressive collapse
Investigation of Double-layer Grid Space Structurer Resistance to Progressive Collapse [Volume 26, Issue 1, 2007, Pages 149-164]
Progressive damage
Strength Prediction of Woven Composite Rings using Progressive Damage Analysis [Volume 37, Issue 2, 2018, Pages 17-39]
Project scheduling problems
A Heuristic Algorithm for Project Scheduling Problem to Maximizing the Net Present Value [Volume 25, Issue 2, 2006, Pages 11-30]
Propeller vibration
Free and Forced Vibrations of a Shaft and Propeller Using the Couple of Finite Volume Method, Boundary Element Method
and Finite Element Method [Volume 34, Issue 2, 2016, Pages 13-36]
Pseudo observer
Dynamic Modeling for Earth â Pointing Satellites to Control the Three â axis Attitude without the Attitude Information of One Axis [Volume 21, Issue 2, 2002, Pages 1-14]
PSO algorithm
Robust Nonlinear Control of Missile Longitudinal Dynamics in Presence of Unmatched Uncertainty [Volume 35, Issue 1, 2016, Pages 1-9]
PSO-harmony algorithm
Feature Selection in Structural Health Monitoring Big Data Using a Meta-Heuristic Optimization Algorithm [Volume 39, Issue 1, 2020, Pages 1-27]
Pulse plating
Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current [Volume 23, Issue 2, 2004, Pages 197-205]
PWM switching converter
Analysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype [Volume 23, Issue 2, 2004, Pages 25-38]
Q
Quality Control
Fundamentals of the Capture Zone Calculations to Qualitatively Protect Cities Drinking Water Wells [Volume 23, Issue 2, 2004, Pages 77-91]
Quality costs
Economic Design of R2R Controller using EWMA Procedure [Volume 24, Issue 2, 2005, Pages 15-28]
Quantum dot
Optimization of Thermalisation Loss in the Quantum Dot Solar Cells using a Finite Element Method [Volume 38, Issue 2, 2019, Pages 83-95]
Quick scheme
Effect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate [Volume 27, Issue 1, 2008, Pages 103-115]
R
R2R controller
Economic Design of R2R Controller using EWMA Procedure [Volume 24, Issue 2, 2005, Pages 15-28]
Radar
Performance Improvement of Radar Target Detection by Wavelet-based Denoising Methods [Volume 24, Issue 1, 2005, Pages 17-29]
Radar
Radar Signal Detection in K-distributed Clutter by Pade Approximation [Volume 26, Issue 2, 2007, Pages 53-65]
Radial Basis Function
Buckling Analysis of Non-Prismatic Columns Subjected to Non-Uniform Loading Using the Meshless Local Petrov-Galerkin Method [Volume 40, Issue 2, 2021, Pages 39-56]
Radial inflow gas turbine
Fundamentals Design and Set up Radial Inflow Gas Turbine Research Lab [Volume 21, Issue 2, 2002, Pages 61-71]
Radial stress
Stress Fields and Electric Potential in Piezoelectric Cylinders [Volume 26, Issue 2, 2007, Pages 1-16]
Radiation
3-D Numerical Simulation of Gas Turbine Combustor [Volume 22, Issue 2, 2003, Pages 137-148]
Radon Transform
Application of Radon Transform in Detecting Turning Angle of Bodies and in Reading Multi - Lingual Documents [Volume 22, Issue 1, 2003, Pages 31-45]
Rainfall-Runoff model
Flood Hydrograph Simulation with Uncertainty in Rainfall - Runoff Parameters [Volume 23, Issue 2, 2004, Pages 93-111]
Random JONSWAP wave theory
Reliability Study of Energy Harvesting from Sea Waves by Piezoelectric Patches Consideraing Random JONSWAP Wave Theory [Volume 36, Issue 2, 2017, Pages 21-34]
Random vibration
Absolute Acceleration Transfer Function of Secondary Systems Subjected to Multi- Component Earthquakes [Volume 21, Issue 1, 2002, Pages 113-139]
Random Waves
Estimation of Lift Force on a Rough Vertical Pile of Platform to Random Sea Waves [Volume 23, Issue 1, 2004, Pages 83-94]
Random- weighted Monte Carlo simulation
Random - weighted Monte Carlo Simulation Method for Structural Reliability Analysis [Volume 37, Issue 2, 2018, Pages 41-60]
Random winding
Yarn Tension along Cone Winding using a Controlling Loop [Volume 26, Issue 1, 2007, Pages 323-328]
Rate of interest
A New Heuristic Algorithm for Time-cost Trade-off Problem Taking into Account Monetary Value [Volume 24, Issue 1, 2005, Pages 31-46]
Rayleigh
Effects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities [Volume 21, Issue 1, 2002, Pages 181-194]
R.C.C
investigation of Parameters Affecting Abrasion Resistance of R.C.C. [Volume 24, Issue 1, 2005, Pages 155-176]
Reactive Power
Reactive Power Pricing in an Open Access Environment Considering Combined Optimum Voltage Profile and Voltage Stability [Volume 21, Issue 1, 2002, Pages 1-14]
Reactive Power Management
Reactive Power Pricing in an Open Access Environment Considering Combined Optimum Voltage Profile and Voltage Stability [Volume 21, Issue 1, 2002, Pages 1-14]
Reactive Power Pricing
Reactive Power Pricing in an Open Access Environment Considering Combined Optimum Voltage Profile and Voltage Stability [Volume 21, Issue 1, 2002, Pages 1-14]
Reactive sources
Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
Rectangular rod
Effect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate [Volume 27, Issue 1, 2008, Pages 103-115]
Rectangular thin plates
Modelling Wave Propagation in Thin Plates with the pectral Modal Method [Volume 37, Issue 1, 2018, Pages 51-64]
Rectangular Viscoelastic Plate
Analysis and Comparison of Nonlinear Dynamic Behavior of Viscoelastic and Elastic Rectangular Plates under Supersonic Aerodynamic Flow [Volume 40, Issue 1, 2021, Pages 125-151]
Recurrent neural networks
Performance Analysis of a New Neural Network for Routing in Mesh Interconnection Networks [Volume 20, Issue 2, 2001, Pages 17-25]
Recursive functions
A New Recursive Formulation for the Mixed Redundancy Strategy in Reliability Optimization Problems [Volume 39, Issue 2, 2020, Pages 45-58]
Recursive least square
Adaptive Speed Control of Three-Phase Induction Servo-drives Based on Feedback Linearization Theory [Volume 22, Issue 2, 2003, Pages 21-34]
Recursive search procedure
A Heuristic Algorithm for Project Scheduling Problem to Maximizing the Net Present Value [Volume 25, Issue 2, 2006, Pages 11-30]
Reddy theory
Analysis of the Effect of Fluid Velocity on the Instability of Concrete Pipes Reinforced with Nanoparticles Conveying the Fluid Flow [Volume 38, Issue 2, 2019, Pages 63-81]
Redistribution
Combination of Adaptive-Grid Embedding and Redistribution Methods on Semi Structured Grids for two-dimensional invisid flows [Volume 27, Issue 2, 2008, Pages 123-137]
Reduced frequency
Effect of Reduced Frequency on the Unsteady Aerodynamic Performance of a Wind Turbine Blade Section [Volume 26, Issue 1, 2007, Pages 247-268]
Reductive leaching
Optimization of Reductive Leaching of Tidar Cobalt Ore Using Taguchi Method [Volume 24, Issue 1, 2005, Pages 337-354]
Redundancy allocation problem
A New Recursive Formulation for the Mixed Redundancy Strategy in Reliability Optimization Problems [Volume 39, Issue 2, 2020, Pages 45-58]
Redundant cooperative manipulators
Inverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory [Volume 26, Issue 1, 2007, Pages 221-232]
Reflection behavior
Using the Geometric Model to Explain the Longitudinal and CrossâSectional Reflection Behaviors of Acrylic yarns [Volume 21, Issue 2, 2002, Pages 167-180]
Reinforced concrete
Investigation of the Rigidity of Floor Diaphragms on the Behavior of Concrete Tall Buildings with Staggered Shear Walls under Lateral Loading [Volume 21, Issue 1, 2002, Pages 81-100]
Reinforced concrete beam
Effects of Transverse and Longitudinal Steel Ratios and Shear Span on the Behavior of RC Beams under Shear Using Modified Compression Field Theory [Volume 27, Issue 2, 2008, Pages 81-101]
Reinforced slope
Study of Reinforced Slopes Safety Factor Using the Inclined Slices Method [Volume 27, Issue 2, 2008, Pages 139-148]
Reinforced sound
Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers [Volume 23, Issue 2, 2004, Pages 113-131]
Reinforncing ceramic particles
Investigation of Parameters Involved in the Production of Aluminum Matrix Composites Using Hot Powder Extrusion [Volume 25, Issue 1, 2006, Pages 179-188]
Reinvestment strategy
Multi-mode Resource Constrained Project Selection and Scheduling Considering the Reinvestment Strategy in a Flexible Time Horizon [Volume 40, Issue 1, 2021, Pages 17-42]
Reliability
Reliability-Based Design Optimization of Structures using Modified Weighted Simulation Method [Volume 35, Issue 2, 2016, Pages 1-22]
Reliability
Reliability Study of Energy Harvesting from Sea Waves by Piezoelectric Patches Consideraing Random JONSWAP Wave Theory [Volume 36, Issue 2, 2017, Pages 21-34]
Reliability analysis
Probabilistic Evaluation on the Free Vibration of Functionally Graded Material Plates Using 3D Solution and Meta-Model Methods [Volume 39, Issue 1, 2020, Pages 45-66]
Reliability optimization
A New Recursive Formulation for the Mixed Redundancy Strategy in Reliability Optimization Problems [Volume 39, Issue 2, 2020, Pages 45-58]
Repair concrete
Influence of (SBR) Latex and Silica Fume on Properties and Performance of Cement - based Repair Concretes [Volume 26, Issue 2, 2007, Pages 33-47]
Residual stresses
Bending-Unbending Analysis of Anisotropic Sheet under Plane Strain Condition [Volume 26, Issue 2, 2007, Pages 77-86]
Residual stresses
Development of Circular Disk Model for Polymeric Nanocomposites and Micromechanical Analysis of Residual Stresses in Reinforced Fibers with Carbon Nanotubes [Volume 35, Issue 2, 2016, Pages 177-196]
Resource constraints
Multi-mode Resource Constrained Project Selection and Scheduling Considering the Reinvestment Strategy in a Flexible Time Horizon [Volume 40, Issue 1, 2021, Pages 17-42]
Response surface method
Effect of Limestone Powder on Compressive Strength of Concrete Containing Silica Fume and Optimization of Mix Design Using Response Surface Method [Volume 24, Issue 1, 2005, Pages 401-411]
ReSSA
Study of Reinforced Slopes Safety Factor Using the Inclined Slices Method [Volume 27, Issue 2, 2008, Pages 139-148]
Return period
Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2003, Pages 73-81]
Return period factor
Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2003, Pages 73-81]
Reynolds number
Determination of the Nonlinear Equation Coefficients for Flow through Coarse Alluvium Foundations [Volume 21, Issue 1, 2002, Pages 101-112]
Riemann problem
Quasi-Static Numerical Simulation of Missile Staging [Volume 20, Issue 2, 2001, Pages 141-152]
Rieman problem
A Second Order Accurate Method in Simulation of Underwater Explosion [Volume 23, Issue 2, 2004, Pages 133-149]
Ring rolling
Ring Rolling FE Analysis in The Presence of the Guide Rolls [Volume 21, Issue 2, 2002, Pages 91-110]
Ring spinning
Effects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns [Volume 24, Issue 1, 2005, Pages 367-380]
Risk
Designing a Closed Loop Supply Chain Network Considering the Supplier Disorder Risk and Production Time [Volume 37, Issue 2, 2018, Pages 61-78]
River bed Simulation
Development of Semi-Tow-Dimensional SDAR Model for Bed Variation Simulation in Alluvial Rivers [Volume 23, Issue 1, 2004, Pages 123-145]
Robust optimization
Robust Optimal Trajectory Design of a Launch Vehicle Using Particle Swarm Optimization [Volume 41, Issue 1, 2022, Pages 175-192]
Rock fill dam
Seepage Analysis through Rockfill Dams by Finite Element Method in a Fixed Gird [Volume 22, Issue 1, 2003, Pages 91-108]
Rockfill material
An Improvement of Vermeer-de Borst Constitutive Model for Numerical Simulation of the Shear Behavior of Rockfills [Volume 36, Issue 2, 2017, Pages 49-62]
Rock full
Determination of the Nonlinear Equation Coefficients for Flow through Coarse Alluvium Foundations [Volume 21, Issue 1, 2002, Pages 101-112]
Roller length
Forced Hydraulic Jump by One and Two Continuous Sills in a Horizontal Stilling Basin. [Volume 24, Issue 1, 2005, Pages 97-119]
Rotary friction welding
Thermomechanical and microstructural simulation of rotary friction welding process of Inconel718 alloy using the finite element method [Volume 42, Issue 2, 2023, Pages 129-147]
Rotor Surface Type
Practical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC [Volume 22, Issue 1, 2003, Pages 1-16]
Routh Vertical pile
Estimation of Lift Force on a Rough Vertical Pile of Platform to Random Sea Waves [Volume 23, Issue 1, 2004, Pages 83-94]
Routing
Performance Analysis of a New Neural Network for Routing in Mesh Interconnection Networks [Volume 20, Issue 2, 2001, Pages 17-25]
RTE
Temperature Distribution of a Non gray Gas between Two Parallel Planes Using Exponential Wide Band Model [Volume 24, Issue 1, 2005, Pages 299-314]
Rubber
Simulation of Non-Isothermal Flow of Rubber in Banbury Mixer Using Computational Fluid Dynamics [Volume 42, Issue 1, 2023, Pages 43-62]
Rubber concrete
Investigation of the Behavior of Rubberized Concrete under Uniaxial Compressive Test [Volume 26, Issue 2, 2007, Pages 49-58]
Rushton impeller
Hydrodynamic simulation of stirred gas-liquid bioreactor for the optimization of the rotation speed of Rushton impellers using CFD [Volume 42, Issue 2, 2023, Pages 109-128]
Rutile
Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]
Rutile
Production of Titanium Carbide via Mechanochemical Process [Volume 27, Issue 2, 2008, Pages 155-164]
Rutting
Effect of Failure Criteria on Stress and Strain Analysis of Asphalt Pavement in Tropical Areas [Volume 27, Issue 1, 2008, Pages 143-150]
RVE
Strength Prediction of Woven Composite Rings using Progressive Damage Analysis [Volume 37, Issue 2, 2018, Pages 17-39]
S
Safety Factor
Behavior of Castellated I Beams Encased in Concrete [Volume 24, Issue 1, 2005, Pages 121-134]
Safety Factor
Study of Reinforced Slopes Safety Factor Using the Inclined Slices Method [Volume 27, Issue 2, 2008, Pages 139-148]
Sampling
A Novel Method for Impedance Calculation of Distance Relays Using Third Order Interpolation [Volume 27, Issue 2, 2008, Pages 1-17]
Sarcheshmeh
Laboratory Scale Determination of Optimum Flotation Conditions of Chalcocite at the Sarcheshmeh Copper Complex Using the Taguchi Method [Volume 23, Issue 1, 2004, Pages 211-220]
Satellite launch vehicle
Robust Optimal Trajectory Design of a Launch Vehicle Using Particle Swarm Optimization [Volume 41, Issue 1, 2022, Pages 175-192]
Saturated Porous Materials
Stochastic Dynamic Analysis of Multilayer Saturated Porous Cylindrical Structures Using the Meshless Local Petrov-Galerkin Method [Volume 42, Issue 2, 2023, Pages 87-108]
Scalar and Vector Control
Practical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC [Volume 22, Issue 1, 2003, Pages 1-16]
Scanner
Colorimetric Scanner Calibration for Textiles by Neural-Network [Volume 22, Issue 2, 2003, Pages 215-224]
Scheduling
Minimizing Total Weighted Tardiness in a Flexible Flowshop Environment Considering Batch Processing Machines [Volume 39, Issue 1, 2020, Pages 105-133]
Search
A New Method for Solving Constraint Satisfaction Problems [Volume 23, Issue 1, 2004, Pages 1-13]
Search Space
A Meta-heuristic Algorithm for Global Numerical Optimization Problems inspired by Vortex in fluid physics [Volume 41, Issue 1, 2022, Pages 101-119]
Seasonal Time Series Forecasting
Electricity Load Forecasting by Combining Adaptive Neuro-fuzzy Inference System and Seasonal Auto-Regressive Integrated Moving Average [Volume 38, Issue 1, 2019, Pages 119-129]
Second-order Newmark method
Enhancement of Precise Integration Method for Dynamic Structural Analysis using Inversion of State Matrix [Volume 35, Issue 2, 2016, Pages 159-176]
Sediment movement
Development of Semi-Tow-Dimensional SDAR Model for Bed Variation Simulation in Alluvial Rivers [Volume 23, Issue 1, 2004, Pages 123-145]
Segmental code
A Modified Character Segmentation Algorithm for Farsi Printed Text Using Upper Contour Labelling [Volume 23, Issue 1, 2004, Pages 33-48]
Seismic load
Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2003, Pages 73-81]
Seismic load
Evaluation of Earth Dam Behavior against Earthquake with respect to Dam Height and Constitutive Model of Dam Materials [Volume 26, Issue 1, 2007, Pages 27-47]
Seismic modeling
Seismic Wave-Field Propagation Modelling using the Euler Method [Volume 38, Issue 2, 2019, Pages 115-123]
Seismic performance level
Numerical Modeling and Seismic Performance of Strap Braced Shear Walls Sheathed by Gypsum Board [Volume 37, Issue 2, 2018, Pages 113-138]
Seismic rehabilitation
Analytical Investigation of TADAS Damper Applied in Seismic Rehabilitation & Design of Concrete Structures [Volume 25, Issue 2, 2006, Pages 51-64]
Seismic retrofitting
Study of Energy Dissipation in Accordion Thin-Walled Tubes under Axial Cyclic Loads [Volume 25, Issue 1, 2006, Pages 101-119]
Seismic vulnerability
Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
Selective training samples
Colorimetric Scanner Calibration for Textiles by Neural-Network [Volume 22, Issue 2, 2003, Pages 215-224]
Semi-2D Simulation
Development of Semi-Tow-Dimensional SDAR Model for Bed Variation Simulation in Alluvial Rivers [Volume 23, Issue 1, 2004, Pages 123-145]
Semi-analytical polynomial method
The Nonlinear Bending Analysis for Circular Nano Plates Based on Modified Coupled Stress and Three- Dimensional Elasticity Theories [Volume 39, Issue 2, 2020, Pages 59-72]
Semi-analytical Polynomial Method (SAPM)
Nonlinear Bending Analysis of Micro/Nano Rectangular and Annular Sector Plates Using a Modified Higher-Order Shear Deformation Theory and the Modified Couple Stress Theory [Volume 40, Issue 1, 2021, Pages 43-58]
Semi-sine shaped hill
Seismic Behavior of 2D Semi-Sine Shaped Hills against Vertically Propagating Incident Waves [Volume 26, Issue 1, 2007, Pages 109-130]
Semi-structured grid
Combination of Adaptive-Grid Embedding and Redistribution Methods on Semi Structured Grids for two-dimensional invisid flows [Volume 27, Issue 2, 2008, Pages 123-137]
Sensitivity analysis
Prediction of Time to Failure in SCC of 304 Stainless Steel in Aqueous Chloride Solution Using Neural Network [Volume 27, Issue 1, 2008, Pages 135-141]
Sensitivity analysis
Using Computational Fluid Dynamics for Determining the Optimum Pre-flush Fluid Injection Condition During Matrix Acidizing [Volume 41, Issue 2, 2022, Pages 117-136]
Separable knapsack problem
An Efficient Algorithm for Reducing the Duality Gap in a Special Class of the Knapsack Problem [Volume 24, Issue 1, 2005, Pages 47-57]
Sequence independent setup times
Modeling and Scheduling Two-stage Assembly Flow Shop Problems with Non-Identical Assembly Machines [Volume 37, Issue 1, 2018, Pages 65-81]
Sequent depth
Forced Hydraulic Jump by One and Two Continuous Sills in a Horizontal Stilling Basin. [Volume 24, Issue 1, 2005, Pages 97-119]
Serial multiplier
Design and Implementation of a High Speed Systolic Serial Multiplier and Squarer for Long Unsigned Integer Using VHDL [Volume 26, Issue 2, 2007, Pages 1-14]
Serratia
Effects of Substrate Solution pH, Incubation Temperature, and Calcination Temperature on Bacterial Synthesis of Nano-Crystalline Hydroxyapatite [Volume 27, Issue 2, 2008, Pages 213-226]
Service period
Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2003, Pages 73-81]
Settlement
Geotechnical Interaction of Piled Raft Foundations: Two Case Studies [Volume 26, Issue 1, 2007, Pages 93-108]
Sewer network
Optimal Design of Sewer Network Size using Ant Colony Optimization Algorithm: Comparing Performance of Four Different Algorithms [Volume 36, Issue 1, 2017, Pages 115-136]
Shallow foundations
Geotechnical Interaction of Piled Raft Foundations: Two Case Studies [Volume 26, Issue 1, 2007, Pages 93-108]
Shallow foundations
The Effect of Mechanical Anisotropy and Heterogeneity of Shear Strength Parameters of Soils on Drained Bearing Capacity of Shallow Foundations [Volume 36, Issue 1, 2017, Pages 137-147]
Shallow water equations
Numerical Simulation of 2D Sediment Transport Equations via Element Free Galerkin [Volume 36, Issue 2, 2017, Pages 139-154]
Shape memory alloys
Numerical Analysis of Thermo-Mechanical Coupling in Shape Memory Alloys [Volume 34, Issue 2, 2016, Pages 1-12]
Shear
Effects of Transverse and Longitudinal Steel Ratios and Shear Span on the Behavior of RC Beams under Shear Using Modified Compression Field Theory [Volume 27, Issue 2, 2008, Pages 81-101]
Shear capacity
Effects of Transverse and Longitudinal Steel Ratios and Shear Span on the Behavior of RC Beams under Shear Using Modified Compression Field Theory [Volume 27, Issue 2, 2008, Pages 81-101]
Shear deformations
A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results [Volume 22, Issue 1, 2003, Pages 57-73]
Shear flow
Stability Analysis for Wake Flow Behind a Flat Plate [Volume 24, Issue 1, 2005, Pages 271-282]
Shear Strength
Modelling of Stress-Strain Behaviour of Clayey Soils Using Artificial Neural Network [Volume 20, Issue 2, 2001, Pages 107-124]
Shear strength anisotropy
Investigation of Shear Strength Anisotropy of c- &phi Soils [Volume 24, Issue 2, 2005, Pages 87-103]
Shear wall
Numerical Modeling and Seismic Performance of Strap Braced Shear Walls Sheathed by Gypsum Board [Volume 37, Issue 2, 2018, Pages 113-138]
Shift vector
Reliability-Based Design Optimization of Structures using Modified Weighted Simulation Method [Volume 35, Issue 2, 2016, Pages 1-22]
Shore
Development of a Computer Model for the Prediction of Littoral Sediment Transport Rate [Volume 20, Issue 2, 2001, Pages 77-91]
Shotcrete
Analytical Assessment of the Behaviour of the Masonry Wall Strengthed by Steel Mesh and Shotcrete [Volume 25, Issue 2, 2006, Pages 213-221]
Shrinkage
Hot Mercerizing of Cotton/Polyester Blend Fabric Effect of Alkali Treatment Temperature on Ttensile Properties , Weight Loss and Shrinkage of Fabric [Volume 24, Issue 1, 2005, Pages 355-365]
SHS reaction
Control Of C/Ti Ratio in Titanium Carbide - Copper Master Alloys Produced by SHS Reactions and its Effect on the Carbide Dispersion In Liquid Copper [Volume 21, Issue 2, 2002, Pages 125-132]
SiCp
Production of A356/SiCp Composite using EPS/SiCp/CMC Mortar [Volume 27, Issue 2, 2008, Pages 183-198]
Silica fume
Effect of Limestone Powder on Compressive Strength of Concrete Containing Silica Fume and Optimization of Mix Design Using Response Surface Method [Volume 24, Issue 1, 2005, Pages 401-411]
Silica fume
An Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete [Volume 25, Issue 2, 2006, Pages 31-49]
Silicon nitride
Thermal Stress Resistance to Fracture and its Relation to with Resistance to Thermal Fatigue and Shock [Volume 22, Issue 1, 2003, Pages 189-202]
Similarity solution
A New Approach for Solving Heat and Mass Transfer Equations of Viscoelastic Nanofluids using Artificial Optimization Method [Volume 38, Issue 1, 2019, Pages 1-18]
Similarity solution
Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
SIMPLE
Numerical and Analytical Study of Natural Dry Cooling Tower in a Steam Power Plant [Volume 26, Issue 1, 2007, Pages 183-195]
Simple Method
Speed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method [Volume 20, Issue 1, 2001, Pages 13-28]
Simplified computational model
Simulation of Simplified Computational Model of Jacket Structure with Timoshenko Cantilever Beam and Experimental Signature [Volume 40, Issue 2, 2021, Pages 19-37]
Simulated Annealing
Solving Bus Terminal Location Problem Using Simulated Annealing Method [Volume 20, Issue 2, 2001, Pages 125-140]
Simulated Annealing
An Algorithm for Two Dimensional Cutting Stock Problems with Demand [Volume 23, Issue 2, 2004, Pages 59-76]
Single conductors
Simulation of Single Conductors Galloping Oscillations and Estimation of their Maximum Amplitudes [Volume 22, Issue 1, 2003, Pages 47-55]
Single loop routing problem
Ant Colony Algorithm for the Single Loop Routing Problem [Volume 23, Issue 1, 2004, Pages 71-81]
Singular Value Decomposition (SVD)
Enhancement of Precise Integration Method for Dynamic Structural Analysis using Inversion of State Matrix [Volume 35, Issue 2, 2016, Pages 159-176]
Site effect
Transient Site Response Analysis of Nonhomogeneous Two-dimensional Topographic Features Using BEM [Volume 24, Issue 2, 2005, Pages 51-68]
Site effects
Seismic Behavior of 2D Semi-Sine Shaped Hills against Vertically Propagating Incident Waves [Volume 26, Issue 1, 2007, Pages 109-130]
Sizing press
Evaluation of Sizing Press Mill Performance in Slab Width Reduction Using FE Simulation [Volume 26, Issue 1, 2007, Pages 269-283]
Skew detection documents
Application of Radon Transform in Detecting Turning Angle of Bodies and in Reading Multi - Lingual Documents [Volume 22, Issue 1, 2003, Pages 31-45]
Slab
Intermix Modeling of Grade Change Operations in Steel Slab Continuous Casting Process [Volume 27, Issue 2, 2008, Pages 165-181]
Slab method
Investigations on Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication [Volume 24, Issue 1, 2005, Pages 283-297]
Slab method
Application of Modified Slab Method in Asymmetrical Plate Rolling [Volume 24, Issue 2, 2005, Pages 137-158]
Slewing spacecraft
Near-Minimum Time Optimal Control of Flexible Spacecraft during Slewing Maneuver [Volume 24, Issue 2, 2005, Pages 123-135]
Sliding Control
Increase of Sliding Mode Controller Stability Limit [Volume 25, Issue 2, 2006, Pages 205-212]
Sliding mode control
Robust Tracking Control of Satellite Attitude Using New EKF for Large Rotational Maneuvers [Volume 25, Issue 1, 2006, Pages 1-15]
Sliding mode control
Robust Nonlinear Control of Missile Longitudinal Dynamics in Presence of Unmatched Uncertainty [Volume 35, Issue 1, 2016, Pages 1-9]
Sliding-mode control
Tracking Control of Uncertain Non - Iinear MIMO System Using Modified Sliding Surfaces for Attitude Large Maneuver of Satellites on Orbit [Volume 22, Issue 1, 2003, Pages 203-209]
Slope limiter
A Second Order Accurate Method in Simulation of Underwater Explosion [Volume 23, Issue 2, 2004, Pages 133-149]
Slope limiter
A Hybridized Crouziex-Raviart Nonconforming Finite Element and Discontinuous Galerkin Method for a Two-Phase Flow in the Porous Media [Volume 38, Issue 2, 2019, Pages 1-22]
Slug flow
Experimental Results of Pressure Fluctuations in a Water Conduit Section Due to Formation of Unstable Two-Phase Air-Water Flow [Volume 24, Issue 2, 2005, Pages 69-86]
Smart materials
Stress Fields and Electric Potential in Piezoelectric Cylinders [Volume 26, Issue 2, 2007, Pages 1-16]
Smoothed Particle Hydrodynamics
Numerical Simulation of Granular Column Collapses with Pressure-Dependent Viscoplastic Model using the Smoothed Particle Hydrodynamic Method [Volume 38, Issue 2, 2019, Pages 23-41]
Smooth particle Hydrodynamic
Smooth Particle Hydrodynamics Scheme for Numerical Simulation of Multiphase Flows With Complex Interface Surfaces [Volume 41, Issue 2, 2022, Pages 137-153]
Snow load
Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2003, Pages 73-81]
SN ratio
Optimization of Reductive Leaching of Tidar Cobalt Ore Using Taguchi Method [Volume 24, Issue 1, 2005, Pages 337-354]
Soft ground
The Pattern of Ground Deformations due to Circular Tunneling [Volume 22, Issue 2, 2003, Pages 83-102]
Soft switching
Introduction and Analysis of a Novel Quasi - Series Resonant DC Link [Volume 22, Issue 1, 2003, Pages 17-29]
Software
Introducing A New Mathematical Model and Developing A Computer Package For 3-D Machining of Fiber Reinforced Polymer Composites [Volume 21, Issue 2, 2002, Pages 111-123]
Soil-Structure Interaction
Shake Table Study of Soil-Structure Interaction Effects on Seismic Response of Adjacent Buildings [Volume 22, Issue 2, 2003, Pages 51-71]
Soil-Structure Interaction
Effects of Support Conditions on Dynamic Behaviour and Seismic Response of Ghadir Bridge [Volume 24, Issue 1, 2005, Pages 177-196]
Sol-Gel process
The production of Ceramic Thin Films by Sol-Gel Method [Volume 22, Issue 2, 2003, Pages 189-200]
Solid65
Analytical Assessment of the Behaviour of the Masonry Wall Strengthed by Steel Mesh and Shotcrete [Volume 25, Issue 2, 2006, Pages 213-221]
Solid-Sphere
Three Dimensional Analysis of Flow Past a Solid-Sphere at Low Reynolds Numbers with the Aid of Body Fitted Coordinates [Volume 20, Issue 2, 2001, Pages 191-206]
Space vector modulation
Space Vector Modulation Based on Classification Method in Three-Phase Multi-Level Voltage Source Inverters [Volume 23, Issue 1, 2004, Pages 15-32]
Spatial variability
The Effect of Mechanical Anisotropy and Heterogeneity of Shear Strength Parameters of Soils on Drained Bearing Capacity of Shallow Foundations [Volume 36, Issue 1, 2017, Pages 137-147]
Speaker adaptation
Speaker Adaptation in Continuous Speech Recognition Using MLLR-Based MAP Estimation [Volume 23, Issue 2, 2004, Pages 39-50]
Spectral Finite Element (FEM)
Damage Detection in Beam and Rod using Wave Propagation Method with Spectral Finite Elements [Volume 35, Issue 2, 2016, Pages 197-210]
Spectral finite element method
Vibration and Stability of Axially Moving Plates by Standard and Spectral Finite Element Methods [Volume 26, Issue 1, 2007, Pages 1-12]
Spectral finite element method
Modelling Wave Propagation in Thin Plates with the pectral Modal Method [Volume 37, Issue 1, 2018, Pages 51-64]
Spectral Method
Stability Analysis for Wake Flow Behind a Flat Plate [Volume 24, Issue 1, 2005, Pages 271-282]
Spectral modal method
Modelling Wave Propagation in Thin Plates with the pectral Modal Method [Volume 37, Issue 1, 2018, Pages 51-64]
Spectral Refelctance
A Comparison between Kubelka-Munk and Geometric Models for Prediction of Reflectance Factor of Transparent Fibers [Volume 26, Issue 2, 2007, Pages 31-45]
Speed Control
Speed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method [Volume 20, Issue 1, 2001, Pages 13-28]
Spinning triangle
Effects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns [Volume 24, Issue 1, 2005, Pages 367-380]
Spiral microchannel
Numerical Simulation of Particle Separation in the Fluid Flow in a Microchannel Including Spiral and Acoustic Regions [Volume 39, Issue 2, 2020, Pages 1-21]
Spline finite strip
Stability Criteria for Rectangular Plates Subjected to Intermediate and End Inplane Loads Using Spline Finite Strip Method [Volume 26, Issue 1, 2007, Pages 65-78]
Sponge iron
Effects of Coating Golegohar-Chadormalu Pellet on Its Behaviour in Direct Reduction Process [Volume 24, Issue 1, 2005, Pages 425-433]
Spur gear
The Effect of Friction on the Nonlinear Vibration of the Cracked One-Stage Power Transmission [Volume 34, Issue 2, 2016, Pages 105-122]
Squirrel cage induction motor
Neural-Network-Aided On-line Diagnosis of Broken Bars inInduction Motors [Volume 25, Issue 1, 2006, Pages 47-61]
Srilankite
Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]
Srilankite
Production of Titanium Carbide via Mechanochemical Process [Volume 27, Issue 2, 2008, Pages 155-164]
Stability error
Enhancement of Precise Integration Method for Dynamic Structural Analysis using Inversion of State Matrix [Volume 35, Issue 2, 2016, Pages 159-176]
Stabiliy control
Investigation of Inclined Retaining Walls (Located on Slopes) Performance against Static and Earthquake Loads [Volume 26, Issue 2, 2007, Pages 17-31]
Stagnation point flow
Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
Stainless Steel
The Role of Metallic Substrate of Hydroxyapatite Coated Dental Endodontic Implants in Clinical and Pathological Success [Volume 20, Issue 1, 2001, Pages 189-205]
Standard cell
Optimized Standard Cell Generation for Static CMOS Technology [Volume 21, Issue 2, 2002, Pages 15-27]
Standard penetration test(SPT)
Comparision of Methods for Determining Bearing Capacity of Piles Using Standard Penetration Test (SPT) Data [Volume 24, Issue 1, 2005, Pages 77-95]
State matrix
Enhancement of Precise Integration Method for Dynamic Structural Analysis using Inversion of State Matrix [Volume 35, Issue 2, 2016, Pages 159-176]
Static buckling
Analytical and Numerical Study on the Buckling of Homogeneous Beams Coated by a Functionally Graded Porous Layer with Different Boundary Conditions [Volume 41, Issue 1, 2022, Pages 61-77]
Static CMOS
Optimized Standard Cell Generation for Static CMOS Technology [Volume 21, Issue 2, 2002, Pages 15-27]
Static earth pressure
Investigation of Inclined Retaining Walls (Located on Slopes) Performance against Static and Earthquake Loads [Volume 26, Issue 2, 2007, Pages 17-31]
Stationary solution
Thermal Simulation of Friction Stir Welding in 304 Stainless Steel to 5083 Aluminum Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 101-117]
Station Density
The Effect of Station Density and Regional Division on Spatial Distribution of Daily Rainfall [Volume 24, Issue 1, 2005, Pages 59-75]
Statistical design of experiments
Laboratory Scale Determination of Optimum Flotation Conditions of Chalcocite at the Sarcheshmeh Copper Complex Using the Taguchi Method [Volume 23, Issue 1, 2004, Pages 211-220]
Stator
Nusselt Number Measurement of Air Flow between Grooved Rotor and Stator of a Generator [Volume 26, Issue 1, 2007, Pages 209-219]
Stator flux oriented
Evaluation of LPF and PCLPF and Development of a Novel Method to Solve DC Offset Problem in Vector Control of Induction Motors [Volume 24, Issue 2, 2005, Pages 1-14]
Steam power plant
Thermo-economic Analysis of Power Cycles [Volume 24, Issue 1, 2005, Pages 413-424]
Steel mesh
Analytical Assessment of the Behaviour of the Masonry Wall Strengthed by Steel Mesh and Shotcrete [Volume 25, Issue 2, 2006, Pages 213-221]
Step motor
Yarn Tension along Cone Winding using a Controlling Loop [Volume 26, Issue 1, 2007, Pages 323-328]
Stewart-Gough Parallel Robot
Forward Kinematics Solution of Stewart-Gough using Improved Hybrid Strategy (Neural Network and 3rd-order Newton-Raphson) [Volume 35, Issue 2, 2016, Pages 113-129]
Stilling basin and Forced jump
Forced Hydraulic Jump by One and Two Continuous Sills in a Horizontal Stilling Basin. [Volume 24, Issue 1, 2005, Pages 97-119]
Stochastic
A New Lower Bound for Completion Time Distribution Function of Stochastic PERT Networks [Volume 23, Issue 1, 2004, Pages 49-69]
Stochastic
Gradient-based Ant Colony Optimization for Continuous Spaces [Volume 25, Issue 1, 2006, Pages 33-45]
Stochastic demand
(Q,r) Stochastic Demand Inventory Model With Exact Number of Cycles [Volume 21, Issue 1, 2002, Pages 71-80]
Stochastic Dynamic Analysis
Stochastic Dynamic Analysis of Multilayer Saturated Porous Cylindrical Structures Using the Meshless Local Petrov-Galerkin Method [Volume 42, Issue 2, 2023, Pages 87-108]
Stoppage cost
Minimizing Stoppage Cost of an Assembly Line Using Genetic Algorithm [Volume 27, Issue 1, 2008, Pages 35-50]
Stored deformation energy
Investigating the Stored Deformation Energy Distribution in a Polycrystalline Metal using a Dislocation Density-based Crystal Viscoplasticity Theory [Volume 37, Issue 2, 2018, Pages 1-15]
Street canyon
Analysis of Various Inflow Turbulence Generation Methods in Large Eddy Simulation Approach for Prediction of Pollutant Dispersion around Model Buildings [Volume 35, Issue 2, 2016, Pages 85-112]
Strength
Siesmic Assessment og Ductility and Strength Capacities of Low-Rise R. C. Buildings [Volume 20, Issue 2, 2001, Pages 55-75]
Strength
Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers [Volume 23, Issue 2, 2004, Pages 113-131]
Strength
Investigation of Some Properties and Durability of Concrete in Urumie Lake [Volume 26, Issue 1, 2007, Pages 131-148]
Strengthening
A Theoretical Study of the Behavior of Reinforced Concrete Columns Strengthened by Steel Plates and Transverse Reinforcements [Volume 25, Issue 2, 2006, Pages 65-72]
Stress
Stress Analysis of Flight Vehicles under Flight Conditions [Volume 25, Issue 1, 2006, Pages 217-226]
Stress and Strain
Effect of Failure Criteria on Stress and Strain Analysis of Asphalt Pavement in Tropical Areas [Volume 27, Issue 1, 2008, Pages 143-150]
Stress corrosion cracking
Prediction of Time to Failure in SCC of 304 Stainless Steel in Aqueous Chloride Solution Using Neural Network [Volume 27, Issue 1, 2008, Pages 135-141]
Stress corrosion cracking
Numerical and Experimental Evaluation of Pitting Corrosion of CUSTOM 450 Stainless Steel Alloy in Chloride Environment [Volume 40, Issue 1, 2021, Pages 103-124]
Stress-Strain
Modelling of Stress-Strain Behaviour of Clayey Soils Using Artificial Neural Network [Volume 20, Issue 2, 2001, Pages 107-124]
Stress-Strain
Investigation of the Behavior of Rubberized Concrete under Uniaxial Compressive Test [Volume 26, Issue 2, 2007, Pages 49-58]
Strontium-rich intermetallic compounds
Study of the Mechanism and Causes of Pore Formation in Sr-modified Al-Si Alloys [Volume 25, Issue 1, 2006, Pages 189-206]
Strouhal number
Effect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate [Volume 27, Issue 1, 2008, Pages 103-115]
Structural design
Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2003, Pages 73-81]
Structural health monitoring
Feature Selection in Structural Health Monitoring Big Data Using a Meta-Heuristic Optimization Algorithm [Volume 39, Issue 1, 2020, Pages 1-27]
Structural reliability
Development of Fragility and Reliability Curves and Seismic Vulnerability Evaluation of Talehzang Concrete Bridge [Volume 25, Issue 1, 2006, Pages 79-99]
Structural reliability analysis
Random - weighted Monte Carlo Simulation Method for Structural Reliability Analysis [Volume 37, Issue 2, 2018, Pages 41-60]
Submerged Vanes
Calculation of Optimum Dimensions and Array of Submerged Vanes at Intakes Using the Feasible Direction Method [Volume 20, Issue 2, 2001, Pages 207-215]
Suboptimum
Radar Signal Detection in K-distributed Clutter by Pade Approximation [Volume 26, Issue 2, 2007, Pages 53-65]
Sulphuric acid
Optimization of Reductive Leaching of Tidar Cobalt Ore Using Taguchi Method [Volume 24, Issue 1, 2005, Pages 337-354]
Super-element
A Super - Element Based on Finite Element Method for Latticed Columns Computational Aspect and Numerical Results [Volume 22, Issue 1, 2003, Pages 57-73]
Supersaturated solid solution
Formation Mechanism and Enthalpy of Mixing of Nanocrystalline NiTi Intermetallic during Mechanical Alloying [Volume 26, Issue 2, 2007, Pages 59-70]
Supersonic Aerodynamic Flow
Analysis and Comparison of Nonlinear Dynamic Behavior of Viscoelastic and Elastic Rectangular Plates under Supersonic Aerodynamic Flow [Volume 40, Issue 1, 2021, Pages 125-151]
Supersonic flow
Experimental Study of Base Pressure of Two-Dimensional and Axisymmetric Bodies and Evalution of the Theoretical Methods [Volume 23, Issue 1, 2004, Pages 163-178]
Supersonic flow field
Experimental Investigations of Supersonic Flow around a Long Axisymmetric Body [Volume 24, Issue 2, 2005, Pages 171-191]
Supply chain coordination
Coordinating Orders in Three-echelon Supply Chain using price adjustment mechanism [Volume 27, Issue 2, 2008, Pages 67-80]
Surface Profile
Development of Semi-Tow-Dimensional SDAR Model for Bed Variation Simulation in Alluvial Rivers [Volume 23, Issue 1, 2004, Pages 123-145]
Surrogate constraints
An Efficient Algorithm for Reducing the Duality Gap in a Special Class of the Knapsack Problem [Volume 24, Issue 1, 2005, Pages 47-57]
Surrogate model
Structural Damage Detection using Frequency Response Function Index and Surrogate Model Based on Optimized Extreme Learning Machine Algorithm [Volume 36, Issue 1, 2017, Pages 1-17]
Surrogate model
Feature Selection in Structural Health Monitoring Big Data Using a Meta-Heuristic Optimization Algorithm [Volume 39, Issue 1, 2020, Pages 1-27]
Swirling flow
3-D Numerical Simulation of Gas Turbine Combustor [Volume 22, Issue 2, 2003, Pages 137-148]
Switching equipments
Forecasting Capital Investment for Fixed-Telephony Network Switching Equipment in Tandem with NGN Migration Using Cobb-Douglas Model [Volume 27, Issue 1, 2008, Pages 1-16]
Synchronoues Machine
Speed Control of A Three Phase Current Forced Synchronous Machine Drive Based on A Simple Method [Volume 20, Issue 1, 2001, Pages 13-28]
Synchronous Machine
Practical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC [Volume 22, Issue 1, 2003, Pages 1-16]
System losses
Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
Systolic arrays
Computation of Trigonometric Functions by the Systolic Implementation of the CORDIC Algorithm [Volume 20, Issue 1, 2001, Pages 1-11]
Systolic multiplier
Design and Implementation of a High Speed Systolic Serial Multiplier and Squarer for Long Unsigned Integer Using VHDL [Volume 26, Issue 2, 2007, Pages 1-14]
T
Tabu Search
Application of Tabu Search to a Special Class of Multicommodity Distribution Systems [Volume 20, Issue 2, 2001, Pages 43-54]
Tabu Search
Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
Taguchi
Laboratory Scale Determination of Optimum Flotation Conditions of Chalcocite at the Sarcheshmeh Copper Complex Using the Taguchi Method [Volume 23, Issue 1, 2004, Pages 211-220]
Taguchi method
Optimization of Reductive Leaching of Tidar Cobalt Ore Using Taguchi Method [Volume 24, Issue 1, 2005, Pages 337-354]
Tanker
Dynamic Analysis and Stability of Articulated Liquid Cargo Vehicles with Tank Baffles [Volume 20, Issue 1, 2001, Pages 219-232]
Tapered beam
Buckling Analysis of FGM Timoshenko Beam with Variable Thickness under Concentrated and Distributed Axial loads Using DQM [Volume 41, Issue 1, 2022, Pages 135-154]
Taylor model
Investigating the Stored Deformation Energy Distribution in a Polycrystalline Metal using a Dislocation Density-based Crystal Viscoplasticity Theory [Volume 37, Issue 2, 2018, Pages 1-15]
Temperature
A Three- Dimensional Model of the Caspian Sea [Volume 21, Issue 1, 2002, Pages 207-220]
Tensile Properties
Using Artificial Neural Network Algorithm to Predict Tensile Properties of Cotton-Covered Nylon Core Yarns [Volume 24, Issue 2, 2005, Pages 241-251]
Tension control
Yarn Tension along Cone Winding using a Controlling Loop [Volume 26, Issue 1, 2007, Pages 323-328]
Tension-only
An Innovative Method for The Analysis of Structures with Tension-only Members [Volume 20, Issue 1, 2001, Pages 69-81]
Terminal Phase Cooperative Guidance
Design of an Optimal Cooperative Guidance Law Confronting Evaders with High Maneuver [Volume 42, Issue 1, 2023, Pages 1-18]
Test
Theoretical and Experimental Collapse Analysis of Ring Stiffened Shells Using Finite Element Software Packages and Application of Results to a Submarine Pressure Hull [Volume 25, Issue 1, 2006, Pages 227-236]
Tethered Space Robot
Dynamic Modeling and Control of a Tethered Space Robot [Volume 35, Issue 1, 2016, Pages 111-121]
Textile
A Comparison between CIECAM97s and its Revised Colour Appearance Models for Apearance Attributes of Fabrics [Volume 24, Issue 2, 2005, Pages 227-239]
Texture
Effect of Current Density and Surface Preparation of Steel on Morphology and Texture of Zinc Electrodeposits [Volume 23, Issue 2, 2004, Pages 173-184]
Thermalization loss
Optimization of Thermalisation Loss in the Quantum Dot Solar Cells using a Finite Element Method [Volume 38, Issue 2, 2019, Pages 83-95]
Thermal Resistance
Determination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids [Volume 22, Issue 1, 2003, Pages 129-142]
Thermal shock resistance
Thermal Stress Resistance to Fracture and its Relation to with Resistance to Thermal Fatigue and Shock [Volume 22, Issue 1, 2003, Pages 189-202]
Thermal spokes
Ring Rolling FE Analysis in The Presence of the Guide Rolls [Volume 21, Issue 2, 2002, Pages 91-110]
Thermal stability
Thermal Buckling Analysis of Graphene Nanoplates Based on the Modified Couple Stress Theory using Finite Strip Method and Two-Variable Refined Plate Theory [Volume 38, Issue 2, 2019, Pages 43-61]
Thermochemical treatment
Effect of Thermochemical Treatment on The Structure, Hardness and Wear Behavior of Electrolss Ni-P Coated 4140 Steel [Volume 23, Issue 2, 2004, Pages 185-195]
Thermo-economy
Thermo-economic Analysis of Power Cycles [Volume 24, Issue 1, 2005, Pages 413-424]
Thermo Elastic Plastic Analysis
Thermo-Elastic-Plastic Analysis of Plate Forming Process by Flame Bending Method [Volume 24, Issue 2, 2005, Pages 159-170]
Thermomechanical processing
Microstructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation [Volume 23, Issue 1, 2004, Pages 189-201]
Thermo- mechanical properties
Thermal Stress Resistance to Fracture and its Relation to with Resistance to Thermal Fatigue and Shock [Volume 22, Issue 1, 2003, Pages 189-202]
Thin Ni-P coating
Effect of Thermochemical Treatment on The Structure, Hardness and Wear Behavior of Electrolss Ni-P Coated 4140 Steel [Volume 23, Issue 2, 2004, Pages 185-195]
Thin sheet tank
Modeling the Vertical Falling Life Chute [Volume 27, Issue 2, 2008, Pages 149-154]
Third order Shear Deformation Plate Theory
Buckling of Thick Laminated Composite Plates Based on Zigzag and Third order Shear Deformation Theories using the Finite Strip Method [Volume 37, Issue 1, 2018, Pages 83-105]
Three Dimensional Analysis
Three Dimensional Analysis of Flow Past a Solid-Sphere at Low Reynolds Numbers with the Aid of Body Fitted Coordinates [Volume 20, Issue 2, 2001, Pages 191-206]
Three-dimensional elasticity theory
The Nonlinear Bending Analysis for Circular Nano Plates Based on Modified Coupled Stress and Three- Dimensional Elasticity Theories [Volume 39, Issue 2, 2020, Pages 59-72]
Three dimensional geometry
3D Investigation of Tubular PEM Fuel Cell Performance Assuming Fluid- Solid- Heat Interaction [Volume 41, Issue 1, 2022, Pages 79-99]
Three-dimensional Solution
Probabilistic Evaluation on the Free Vibration of Functionally Graded Material Plates Using 3D Solution and Meta-Model Methods [Volume 39, Issue 1, 2020, Pages 45-66]
Three-dimentional boundary layer
Experimental Investigations of Supersonic Flow around a Long Axisymmetric Body [Volume 24, Issue 2, 2005, Pages 171-191]
Three-phase structures
Free Vibration Analysis of Polymer/Graphene Nanoplatelet/Fiber Truncated Conical Shells Embedded in an Elastic Foundation [Volume 42, Issue 2, 2023, Pages 69-86]
Three-Phase Unit Cell
Development of Circular Disk Model for Polymeric Nanocomposites and Micromechanical Analysis of Residual Stresses in Reinforced Fibers with Carbon Nanotubes [Volume 35, Issue 2, 2016, Pages 177-196]
Thrust-Vectoring
Minimum-Time Roll Around the Velocity-Vector Maneuver of Aircraft [Volume 20, Issue 1, 2001, Pages 173-187]
Ti6A14V alloy
Evaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds [Volume 21, Issue 2, 2002, Pages 145-158]
Ti-6Al-4V alloy
Microstructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation [Volume 23, Issue 1, 2004, Pages 189-201]
TiB2
Pilot in-Situ Production of AL-TiB2 and AL-ZrB2 Composites Using Reactive Slag [Volume 23, Issue 1, 2004, Pages 179-188]
Tidar mine
Optimization of Reductive Leaching of Tidar Cobalt Ore Using Taguchi Method [Volume 24, Issue 1, 2005, Pages 337-354]
Time-cost trade-off
A New Heuristic Algorithm for Time-cost Trade-off Problem Taking into Account Monetary Value [Volume 24, Issue 1, 2005, Pages 31-46]
Time crashing
A New Heuristic Algorithm for Time-cost Trade-off Problem Taking into Account Monetary Value [Volume 24, Issue 1, 2005, Pages 31-46]
Time domain
Transient Site Response Analysis of Nonhomogeneous Two-dimensional Topographic Features Using BEM [Volume 24, Issue 2, 2005, Pages 51-68]
Time domain
Evaluation of the Stability of Time Domain Boundary Element Method in Seismic Analysis of Heterogeneous Environments [Volume 41, Issue 2, 2022, Pages 61-82]
Time series forecasting
Using a Fuzzy Auto Regressive Integrated Moving Average Model for Exchange Rate Forecasting [Volume 26, Issue 2, 2007, Pages 67-75]
Time Step Duration
Evaluation of the Stability of Time Domain Boundary Element Method in Seismic Analysis of Heterogeneous Environments [Volume 41, Issue 2, 2022, Pages 61-82]
Time-temperature equivalence
A New Method for Estimation of Creep of Concrete Using Short-TermTests under Higher Temperature [Volume 23, Issue 1, 2004, Pages 95-122]
Time to failure
Prediction of Time to Failure in SCC of 304 Stainless Steel in Aqueous Chloride Solution Using Neural Network [Volume 27, Issue 1, 2008, Pages 135-141]
Time-value of money
A New Inventory Model for Deteriorating Items with Price-dependent Demand, Time-value of money, and Shortages [Volume 27, Issue 2, 2008, Pages 19-29]
Time weighted residual method
Study on the Dynamic Response of Single and Multi-Spans Beam Subjected to the Base Excitation Using Time Weighted Residual Method [Volume 40, Issue 1, 2021, Pages 1-15]
Timoshenko beam
Analytical and Numerical Study on the Buckling of Homogeneous Beams Coated by a Functionally Graded Porous Layer with Different Boundary Conditions [Volume 41, Issue 1, 2022, Pages 61-77]
Timoshenko beam theory
Dynamic Stability Analysis of FGM Beams Based on the Nonlinear Timoshenko Model [Volume 42, Issue 1, 2023, Pages 63-76]
Titanium
Evaluation of Electrical Breakdown of Anodic Films on Titanium in Phosphate-base Solutions [Volume 22, Issue 2, 2003, Pages 201-213]
Titanium Alloy Ti-6242Si
Shear Localization due to Strain Softening in Side Pressed Cylinders [Volume 22, Issue 1, 2003, Pages 175-188]
Titanium carbide
Control Of C/Ti Ratio in Titanium Carbide - Copper Master Alloys Produced by SHS Reactions and its Effect on the Carbide Dispersion In Liquid Copper [Volume 21, Issue 2, 2002, Pages 125-132]
Titanium carbide
Production of Titanium Carbide via Mechanochemical Process [Volume 27, Issue 2, 2008, Pages 155-164]
Topography
Seismic Behavior of 2D Semi-Sine Shaped Hills against Vertically Propagating Incident Waves [Volume 26, Issue 1, 2007, Pages 109-130]
Track vibrations
Impacts of Wheelârail at Railway Turnouts [Volume 27, Issue 1, 2008, Pages 85-101]
Traffic Assignment
Methods of Reducing the Number of Effective ODs in Order to Solve Traffic Equilibrium Problem in Real Life Networks [Volume 20, Issue 1, 2001, Pages 97-111]
Traffic forecasting
Forecasting Capital Investment for Fixed-Telephony Network Switching Equipment in Tandem with NGN Migration Using Cobb-Douglas Model [Volume 27, Issue 1, 2008, Pages 1-16]
Train-track interaction
Impacts of Wheelârail at Railway Turnouts [Volume 27, Issue 1, 2008, Pages 85-101]
Trajectory design
Robust Optimal Trajectory Design of a Launch Vehicle Using Particle Swarm Optimization [Volume 41, Issue 1, 2022, Pages 175-192]
Trajectory Tracking
Dynamic Modeling and Control of a Tethered Space Robot [Volume 35, Issue 1, 2016, Pages 111-121]
Transformation
Study of Anatase-to-Rutile Phase Transformation in Milled and Unmilled Samples [Volume 25, Issue 1, 2006, Pages 207-216]
Transient flow
Effects of Valve Closing Law and Unsteady Friction Model on Damping Pressure Waves in a Network [Volume 26, Issue 1, 2007, Pages 329-338]
Transient solution
Thermal Simulation of Friction Stir Welding in 304 Stainless Steel to 5083 Aluminum Dissimilar Joint [Volume 36, Issue 2, 2017, Pages 101-117]
Transient Stability
Assessment of ATC Using Voltage and Transient Stability, Simultaneously [Volume 23, Issue 2, 2004, Pages 11-24]
Triaxial
Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers [Volume 23, Issue 2, 2004, Pages 113-131]
Triaxiality
Ductile Damage Evolution under Triaxial Stress Conditions: Computational and Experimental Evaluations [Volume 25, Issue 2, 2006, Pages 151-165]
Triaxial Test
Modelling of Stress-Strain Behaviour of Clayey Soils Using Artificial Neural Network [Volume 20, Issue 2, 2001, Pages 107-124]
Trigonometric functions
Computation of Trigonometric Functions by the Systolic Implementation of the CORDIC Algorithm [Volume 20, Issue 1, 2001, Pages 1-11]
Truncated conical shell
Free Vibration Analysis of Polymer/Graphene Nanoplatelet/Fiber Truncated Conical Shells Embedded in an Elastic Foundation [Volume 42, Issue 2, 2023, Pages 69-86]
Two-axle six degrees of freedom system
Vibration of Elastically Connected Multiple Timoshenko Beams under a Moving Six Degrees of Freedom System [Volume 35, Issue 2, 2016, Pages 23-45]
Two-dimensional functionally graded materials
Buckling Analysis of FGM Timoshenko Beam with Variable Thickness under Concentrated and Distributed Axial loads Using DQM [Volume 41, Issue 1, 2022, Pages 135-154]
Two dimension al model
Experimental Study of Base Pressure of Two-Dimensional and Axisymmetric Bodies and Evalution of the Theoretical Methods [Volume 23, Issue 1, 2004, Pages 163-178]
Two-dimensional sections
Feasibility Study of Three-Dimensional Crack Growth Modeling in Porous Media with Circular Pores Using Two-Dimensional Sections [Volume 41, Issue 2, 2022, Pages 29-60]
Two-dimensional topography effects
Transient Site Response Analysis of Nonhomogeneous Two-dimensional Topographic Features Using BEM [Volume 24, Issue 2, 2005, Pages 51-68]
Two-Fluid Model
Evaluation of Eulerian Two-Fluid Numerical Method for the Simulation of Heat Transfer in Fluidized Beds [Volume 41, Issue 1, 2022, Pages 155-174]
Two phase flow
Effect of Nondimensional Parameters On the Internal Circulation of a Liquid Drop Moving with the Surrounding Gas [Volume 21, Issue 1, 2002, Pages 167-179]
Two- phase flow
A Numerical Study of Dynamic Detonability Characteristics of Two-phase Unconfined Fuel-Air Clouds [Volume 24, Issue 2, 2005, Pages 105-122]
Two-phase flow
Experimental Results of Pressure Fluctuations in a Water Conduit Section Due to Formation of Unstable Two-Phase Air-Water Flow [Volume 24, Issue 2, 2005, Pages 69-86]
Two-phase flow
A Hybridized Crouziex-Raviart Nonconforming Finite Element and Discontinuous Galerkin Method for a Two-Phase Flow in the Porous Media [Volume 38, Issue 2, 2019, Pages 1-22]
Two-Phase Two Dimensional Simulation of Lattice Boltzmann Method
Heat Transfer Enhancement of Al2O3âH2O Nanofluid Free Convection in Two-Phase Flow with Internal Heat Generation Using Two Dimensional Lattice Boltzmann Method [Volume 40, Issue 2, 2021, Pages 1-18]
Two point boundary Value problem
Inverse Kinematics Resolution of Redundant Cooperative Manipulators Using Optimal Control Theory [Volume 26, Issue 1, 2007, Pages 221-232]
Two –Slice Model
Shear Localization due to Strain Softening in Side Pressed Cylinders [Volume 22, Issue 1, 2003, Pages 175-188]
Two-variable refined plate theory
Thermal Buckling Analysis of Graphene Nanoplates Based on the Modified Couple Stress Theory using Finite Strip Method and Two-Variable Refined Plate Theory [Volume 38, Issue 2, 2019, Pages 43-61]
U
Uehara’s method
Optimized Standard Cell Generation for Static CMOS Technology [Volume 21, Issue 2, 2002, Pages 15-27]
Unbalance
The New Definitions for the Power Terms in Distorted and Unbalanced Conditions and Calculation of these Terms for an Electric Arc Furnace [Volume 23, Issue 2, 2004, Pages 207-215]
Uncertainties Analysis
Statistical Analysis of Energy Harvesting From Functionally Graded Cantilever Beam with Piezoelectric Layer [Volume 40, Issue 2, 2021, Pages 95-108]
Uncertainty
Designing a Closed Loop Supply Chain Network Considering the Supplier Disorder Risk and Production Time [Volume 37, Issue 2, 2018, Pages 61-78]
Uncertainty
Probabilistic Evaluation on the Free Vibration of Functionally Graded Material Plates Using 3D Solution and Meta-Model Methods [Volume 39, Issue 1, 2020, Pages 45-66]
Uncertainty
Robust Optimal Trajectory Design of a Launch Vehicle Using Particle Swarm Optimization [Volume 41, Issue 1, 2022, Pages 175-192]
Uncertianty
Flood Hydrograph Simulation with Uncertainty in Rainfall - Runoff Parameters [Volume 23, Issue 2, 2004, Pages 93-111]
Unconfined
A Numerical Study of Dynamic Detonability Characteristics of Two-phase Unconfined Fuel-Air Clouds [Volume 24, Issue 2, 2005, Pages 105-122]
Underground structure
Effect of Underground Structure on PGA at Ground Surface Considering Linear and Nonlinear Behaviour for the Soil [Volume 34, Issue 1, 2016, Pages 119-137]
Underwater explosion
A Second Order Accurate Method in Simulation of Underwater Explosion [Volume 23, Issue 2, 2004, Pages 133-149]
Underwater explosion
Simulation of Underwater Explosion with Cavitation using ALE Method [Volume 34, Issue 2, 2016, Pages 73-85]
Undrained
Modelling of Stress-Strain Behaviour of Clayey Soils Using Artificial Neural Network [Volume 20, Issue 2, 2001, Pages 107-124]
Uninterrupted flow
An Improved Methodology for Measurement of Uninterrupted â Flow Capacity Affected by Pavement Condition [Volume 26, Issue 1, 2007, Pages 79-91]
Unreinforced masonry wall
In-plane Failure Analysis of URM Structures Based on Strain Hardening and Softening in the Multilaminate Framework [Volume 34, Issue 2, 2016, Pages 51-71]
Unrestrained shrinkage
Influence of (SBR) Latex and Silica Fume on Properties and Performance of Cement - based Repair Concretes [Volume 26, Issue 2, 2007, Pages 33-47]
Unsteady flow
Effect of Reduced Frequency on the Unsteady Aerodynamic Performance of a Wind Turbine Blade Section [Volume 26, Issue 1, 2007, Pages 247-268]
Unsteady friction models
Effects of Valve Closing Law and Unsteady Friction Model on Damping Pressure Waves in a Network [Volume 26, Issue 1, 2007, Pages 329-338]
Unstructured 3D grid
A New Implicit Dissipation Term for Solving 3D Euler Equations on Unstructured Grids by GMRES+LU-SGS Scheme [Volume 24, Issue 1, 2005, Pages 233-249]
Upper bound method
Optimalization of Die Shap and Flow Lines in Non-Linear Dies in Extrusion of Non-Circular Sections [Volume 26, Issue 1, 2007, Pages 285-299]
Upper contour
A Modified Character Segmentation Algorithm for Farsi Printed Text Using Upper Contour Labelling [Volume 23, Issue 1, 2004, Pages 33-48]
Upwind
Development of an Upwind Algorithm at Subsonic Regions in the Solution of PNS Equations [Volume 22, Issue 1, 2003, Pages 155-165]
Urumieh Lake
Investigation of Some Properties and Durability of Concrete in Urumie Lake [Volume 26, Issue 1, 2007, Pages 131-148]
V
Vanarj Mine
Processing of Low Grade Fine Manganese Ore Using Flotation Method [Volume 21, Issue 2, 2002, Pages 159-166]
Variable Material Properties approach
A New Bond-Based Peridynamic Model with the Ability to Model Elastoplastic Behavior [Volume 42, Issue 1, 2023, Pages 125-139]
Variable neighbourhood search algorithm
Minimizing Total Weighted Tardiness in a Flexible Flowshop Environment Considering Batch Processing Machines [Volume 39, Issue 1, 2020, Pages 105-133]
Various distributions of BNNTs
Nonlinear Buckling Analysis of Nano-composite Beam with Initial Geometrical Imperfection using Finite Element Method [Volume 36, Issue 2, 2017, Pages 79-98]
Vector Classification
Space Vector Modulation Based on Classification Method in Three-Phase Multi-Level Voltage Source Inverters [Volume 23, Issue 1, 2004, Pages 15-32]
Vector control
Evaluation of LPF and PCLPF and Development of a Novel Method to Solve DC Offset Problem in Vector Control of Induction Motors [Volume 24, Issue 2, 2005, Pages 1-14]
Vehicle
Dynamic Analysis and Stability of Articulated Liquid Cargo Vehicles with Tank Baffles [Volume 20, Issue 1, 2001, Pages 219-232]
Vehicle dynamic
Dynamic Analysis and Stability of Articulated Liquid Cargo Vehicles with Tank Baffles [Volume 20, Issue 1, 2001, Pages 219-232]
Velocity field
A Hybridized Crouziex-Raviart Nonconforming Finite Element and Discontinuous Galerkin Method for a Two-Phase Flow in the Porous Media [Volume 38, Issue 2, 2019, Pages 1-22]
Ventilate
Effects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities [Volume 21, Issue 1, 2002, Pages 181-194]
Vertical & inclined retaining walls
Investigation of Inclined Retaining Walls (Located on Slopes) Performance against Static and Earthquake Loads [Volume 26, Issue 2, 2007, Pages 17-31]
Vertical rolling
Evaluation of Sizing Press Mill Performance in Slab Width Reduction Using FE Simulation [Volume 26, Issue 1, 2007, Pages 269-283]
Vertical tail
Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model [Volume 26, Issue 1, 2007, Pages 233-246]
V-g method
Determination of Dynamic Instability Speed of an Unsweep Wing in Subsonic Flow Including Compressibility Effects [Volume 26, Issue 1, 2007, Pages 197-207]
Vibration modal data
Simulation of Simplified Computational Model of Jacket Structure with Timoshenko Cantilever Beam and Experimental Signature [Volume 40, Issue 2, 2021, Pages 19-37]
Vibration of Beam
Damage Detection in Beam and Rod using Wave Propagation Method with Spectral Finite Elements [Volume 35, Issue 2, 2016, Pages 197-210]
Vibro-Impact
Vibration Control of Structures using Vibro-Impact Nonlinear Energy Sinks [Volume 35, Issue 1, 2016, Pages 123-142]
Viscoelastic nanofluid
A New Approach for Solving Heat and Mass Transfer Equations of Viscoelastic Nanofluids using Artificial Optimization Method [Volume 38, Issue 1, 2019, Pages 1-18]
Viscosity ratio
A Numerical Study of Drop Motion in Poiseuille Flow [Volume 25, Issue 2, 2006, Pages 113-129]
VLSI
Optimized Standard Cell Generation for Static CMOS Technology [Volume 21, Issue 2, 2002, Pages 15-27]
Voltage control area
Application of Pattern Recognition Algorithms for Clustering Power System to Voltage Control Areas and Comparison of Their Results [Volume 20, Issue 2, 2001, Pages 27-42]
Voltage Profile
Reactive Power Pricing in an Open Access Environment Considering Combined Optimum Voltage Profile and Voltage Stability [Volume 21, Issue 1, 2002, Pages 1-14]
Voltage regulator
Application of Tabu Search to Optimal Placement of Distributed Generation and Reactive Power Sources [Volume 25, Issue 1, 2006, Pages 17-31]
Voltage Source Inverter
Practical Implementation of Scalar and Vector Control Methods on a Rotor Surface Type Permanent Magnent Synchronous Machine Drive/System Using a PC [Volume 22, Issue 1, 2003, Pages 1-16]
Voltage stability Voltage weak area
Application of Pattern Recognition Algorithms for Clustering Power System to Voltage Control Areas and Comparison of Their Results [Volume 20, Issue 2, 2001, Pages 27-42]
Volume fraction
Investigation of Entropy Generation in Stagnation Point Flow of Nano Fluid Impinging on the Cylinder with Constant Wall Heat Flux [Volume 39, Issue 1, 2020, Pages 135-145]
Volumetric locking
Numerical Analysis of Benchmark Finite Strain Plasticity Problems using High-order Finite Elements and Finite Cells [Volume 37, Issue 1, 2018, Pages 11-28]
Von Mises stress
A New Bond-Based Peridynamic Model with the Ability to Model Elastoplastic Behavior [Volume 42, Issue 1, 2023, Pages 125-139]
Vortex Bursting
An Experimental Investigation of the Flowfield over a Low Aspect Ratio Wing [Volume 20, Issue 2, 2001, Pages 181-190]
Vortex core
An Experimental Investigation of the Flowfield over a Low Aspect Ratio Wing [Volume 20, Issue 2, 2001, Pages 181-190]
Vortex Optimization Algorithm (VOA)
A Meta-heuristic Algorithm for Global Numerical Optimization Problems inspired by Vortex in fluid physics [Volume 41, Issue 1, 2022, Pages 101-119]
Vortex Shedding
Estimation of Lift Force on a Rough Vertical Pile of Platform to Random Sea Waves [Volume 23, Issue 1, 2004, Pages 83-94]
Vortex Shedding
Effect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate [Volume 27, Issue 1, 2008, Pages 103-115]
Vorticity
A Three- Dimensional Model of the Caspian Sea [Volume 21, Issue 1, 2002, Pages 207-220]
Vulnerability
Seismic Vulnerability of Special Structures: A Case Study of Toos Power Plant Stack [Volume 25, Issue 2, 2006, Pages 73-91]
W
Warp around fin
An Experimental Study of the Aerodynamic Behavior of the Two Wrap Around Fin Missiles [Volume 21, Issue 1, 2002, Pages 141-152]
Waste
An Algorithm for Two Dimensional Cutting Stock Problems with Demand [Volume 23, Issue 2, 2004, Pages 59-76]
Water-cement ratio
An Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete [Volume 25, Issue 2, 2006, Pages 31-49]
Water Injection
Effect of Using Evaporative Condenser Instead of Air Condenser in Window-air Conditioners [Volume 22, Issue 2, 2003, Pages 149-159]
Water Injection
Evaluation of Evaporative Cooling for Heat Transfer in the Condenser of Window-Air Conditioners [Volume 25, Issue 1, 2006, Pages 135-147]
Water Quality Zoning
Water Quality Zoning of Rivers by the Technique of Fuzzy Clustering Analysis [Volume 20, Issue 1, 2001, Pages 55-68]
Water supply network
Numerical and Experimental Analysis of the Effect of Flow Discharge Ratio on Flow Separation at 45 Degree Open End Water Intake [Volume 24, Issue 1, 2005, Pages 213-232]
Wave flume
Simulation of Harmonic Waves Generated by the Piston-type Wave-maker in the Wave Flume via the Exponential Basis Functions Mesh-free Method and MEL Formulation [Volume 37, Issue 1, 2018, Pages 1-9]
Wavelet packet decomposition
Feature Selection in Structural Health Monitoring Big Data Using a Meta-Heuristic Optimization Algorithm [Volume 39, Issue 1, 2020, Pages 1-27]
Wavelet transform
Fault Detection of Plain Circular Knitted Fabrics Using Wavelet Transform [Volume 23, Issue 1, 2004, Pages 221-227]
Wavelet transform
Performance Improvement of Radar Target Detection by Wavelet-based Denoising Methods [Volume 24, Issue 1, 2005, Pages 17-29]
Wave Propagation in Structures
Damage Detection in Beam and Rod using Wave Propagation Method with Spectral Finite Elements [Volume 35, Issue 2, 2016, Pages 197-210]
Wear behavior
Effect of Thermochemical Treatment on The Structure, Hardness and Wear Behavior of Electrolss Ni-P Coated 4140 Steel [Volume 23, Issue 2, 2004, Pages 185-195]
Weight change
An Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete [Volume 25, Issue 2, 2006, Pages 31-49]
Weighted simulation
Reliability-Based Design Optimization of Structures using Modified Weighted Simulation Method [Volume 35, Issue 2, 2016, Pages 1-22]
Weight loss
Hot Mercerizing of Cotton/Polyester Blend Fabric Effect of Alkali Treatment Temperature on Ttensile Properties , Weight Loss and Shrinkage of Fabric [Volume 24, Issue 1, 2005, Pages 355-365]
Weldability
Microstructural Effect on the Weldability of 25Cr-35Ni Cast Steel [Volume 24, Issue 1, 2005, Pages 327-336]
Wind load
Study of the Service-life Factor and its Effects on Safety and Economic Considerations in Building Design [Volume 22, Issue 2, 2003, Pages 73-81]
Window-air conditioner
Evaluation of Evaporative Cooling for Heat Transfer in the Condenser of Window-Air Conditioners [Volume 25, Issue 1, 2006, Pages 135-147]
Window-air-conditioner
Effect of Using Evaporative Condenser Instead of Air Condenser in Window-air Conditioners [Volume 22, Issue 2, 2003, Pages 149-159]
Wind tunnel
An Experimental Study of the Aerodynamic Behavior of the Two Wrap Around Fin Missiles [Volume 21, Issue 1, 2002, Pages 141-152]
Wind tunnel
Experimental Study of Base Pressure of Two-Dimensional and Axisymmetric Bodies and Evalution of the Theoretical Methods [Volume 23, Issue 1, 2004, Pages 163-178]
Wind tunnel
Experimental Investigation of the Effect of Vertical Tail on the Flow Field and Aerodynamic Forces of a fighter Model [Volume 26, Issue 1, 2007, Pages 233-246]
Wind turbine
Effect of Reduced Frequency on the Unsteady Aerodynamic Performance of a Wind Turbine Blade Section [Volume 26, Issue 1, 2007, Pages 247-268]
Woven fabrics
Strength Prediction of Woven Composite Rings using Progressive Damage Analysis [Volume 37, Issue 2, 2018, Pages 17-39]
Yarn in terstructure
Effects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns [Volume 24, Issue 1, 2005, Pages 367-380]
Yarn tenacity
Effects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns [Volume 24, Issue 1, 2005, Pages 367-380]
Yarn tension
Effects of Changes in Front Drafting Rollers Geometry on the Properties of Ring Spun Yarns [Volume 24, Issue 1, 2005, Pages 367-380]
Z
Zayandeh-Rood River
Water Quality Zoning of Rivers by the Technique of Fuzzy Clustering Analysis [Volume 20, Issue 1, 2001, Pages 55-68]
Zero voltage switching (ZVS)
Analysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype [Volume 23, Issue 2, 2004, Pages 25-38]
Zigzag Theory
Buckling of Thick Laminated Composite Plates Based on Zigzag and Third order Shear Deformation Theories using the Finite Strip Method [Volume 37, Issue 1, 2018, Pages 83-105]
Zinc Coating
Effect of Current Density and Surface Preparation of Steel on Morphology and Texture of Zinc Electrodeposits [Volume 23, Issue 2, 2004, Pages 173-184]
Zinc Electroplating
The Effect of Current Density on Morphology and Texture of Zinc Electrodeposit on Steel [Volume 20, Issue 1, 2001, Pages 207-217]
Zinc-nickel(Zn-Ni)
Zinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current [Volume 23, Issue 2, 2004, Pages 197-205]
Zirconium tin titanate
Annealing Effects on Microstructure and Microwave Properties of CuO-Doped (Zr0.8Sn0.2)TiO4 [Volume 27, Issue 2, 2008, Pages 199-211]
ZrB2
Pilot in-Situ Production of AL-TiB2 and AL-ZrB2 Composites Using Reactive Slag [Volume 23, Issue 1, 2004, Pages 179-188]
ZVS methods
Analysis and Simulation of ZVS Methods in Full Bridge Converters and Realization of a 3 KW Prototype [Volume 23, Issue 2, 2004, Pages 25-38]
